Reviews Split Core Current Transducer
MartinLogan Motion 60XTi Floorstanding Speaker Gloss Black (Each)
- High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
- Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
- Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
- Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
- Inputs: Custom 5-way bi-wire tool-less binding posts.
- Frequency Response: 35–25,000 Hz ±3dB, Recommended Amplifier Power: 20-400 watts per channel.
- Horizontal Dispersion: 80°, Vertical Dispersion: 30°, Sensitivity: 94 dB/2.83 volts/meter.
- Impedance: 4 Ohms Compatible with 4, 6, or 8 Ohm rated amplifiers..
- Weight: 66 lbs., Dimensions: 48" x 11.4" x 14.4".
Check StockJANSANE SCT-013-000 100A Non-invasive AC Current Sensor Split-Core Clamp Current Transformer
- This ac current sensor used for measuring alternating current, particularly used for whole building consumption or generation..
- This split core transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi..
- Use this split core current sensor to build your own energy monitor, reducing your power usage, or use it build an over-current protection device for....
- Two Form of Output: current output or voltage output (burden resistor needed to add).
- Suitable for lighting equipment, AC motors, air compressors, monitoring, current measurement and over-current protection.
Check StockPEACEFAIR PZCT-02 Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter
- SMALL AND LIGHT: This current transformer Built-in input coil.
- SNAP JOINT STRUCTURE:The diameter of inner hole is 16mm, the accuracy is 0.5 grade, Using snap joint structure, it can be fixed to the cable directly through nylon ties..
- GOOD MECHANICAL PROPERTIES: Fully enclosed, good mechanical properties and environmental resistance, strong voltage isolation capability, safety and reliability..
- USED FOR ENERGY METER IN SPECIAL: Current transducer used for energy meter in special.
- AC 220v, 380v power supply can both be applied..
- MINI SIZE:This is a mini split base current transformer.
- it's the smallest one compared to the similar products (output 100MA)..
Check StockCENTAURUS SCT-013-000 Split Core Current Transformer Sensor Non-invasive SCT013000 AC Current Split Core Transformer Sensor SCT-013-000 100A/50mA
- 【OPTIMAL PERFORMANCE】CENTAURUS premium upgrade SCT-013-000 Current Transformer Sensor is used for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc..
- 【HIGH QUALITY】CENTAURUS premium SCT-013-000 AC Current Transformer Sensor is made of high quality Ferrite material which can use for a long time.This split core current transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi..
- 【MAIN SPECIFICATION】Opening size: 13mm×13mm, fully compatible with most similar products.
- The lead length is 1.5 meters, the standard Φ3.5 three-core plug output..
- 【OPTIMAL RELIABILITY】CENTAURUS SCT-013-000 AC Current Transformer Sensor has two forms of output current, voltage (voltage output built-in the sampling resistor).Non-linearity ±3% (10%~120% rated input current)..
- 【PACKAGE & SERVICE】Package Include: 1Pcs x SCT-013-000 Split Core Current Transformer Sensor .Any question Pls fell free to contact us, we will reply you within 24H.And we offer a 12 month warranty..
Check StockDUNSI SCT-013-000 Split Core Current Transformer Sensor Non-invasive SCT013000 AC Current Split Core Transformer Sensor SCT-013-000 100A/50mA
- 【HIGH QUALITY】DUNSI premium SCT-013-000 AC Current Transformer Sensor is made of high quality Ferrite material which can use for a long time.This split core current transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi..
- 【MAIN SPECIFICATION】Opening size: 13mm×13mm, fully compatible with most similar products.
- The lead length is 1.5 meters, the standard Φ3.5 three-core plug output..
- 【OPTIMAL PERFORMANCE】DUNSI premium upgrade SCT-013-000 Current Transformer Sensor is used for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc..
- 【OPTIMAL RELIABILITY】DUNSI SCT-013-000 AC Current Transformer Sensor has two forms of output current, voltage (voltage output built-in the sampling resistor).Non-linearity ±3% (10%~120% rated input current)..
- 【PACKAGE & SERVICE】Package Include: 1Pcs x SCT-013-000 Split Core Current Transformer Sensor .Any question Pls fell free to contact us, we will reply you within 24H.And we offer a 12 month warranty..
Check StockCurrent Transmitter Current Transducer Transmitter Transformer Sensor AC Current Converter 0-50A
- Mutual inductance current monitoring, high current detection accuracy, stable performance, safe isolation of input and output..
- The measured current of this current transmitter is AC 0-10A/20A/50A.
- The output signal of this current transducer is DC: 0‑5V/0‑10V/4‑20mA 3 forms are optional..
- With strong overload capacity, high accuracy, high isolation, high safety, low power consumption.
- through‑core structure design, isolation withstand voltage up to 2000VAC.
- hysteresis less than 1%, can be used under strong magnetic field conditions..
- The shell is made of self-extinguishing material ABS.
- it is easy to install and use, and there is no need to connect DC in series in the circuit when measuring..
Check Stock4Pcs 100A/50mA SCT013000 Non-invasive Split Transformer Sensor SCT-013-000 Split Core Current Sensor Transformer
- ❤Applications❤Suitable for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc..
- ❤Reliability❤Fully compatible with most similar products.
- the number of opening and closing times is not less than 1000 (tested at 20℃).
- this split core current transformer is particularly suitable which can use for a long time for DIY use and it works well with arduino and raspberry pi..
- ❤Specification❤Opening size: 13mm × 13mm.
- lead length: 1.5 meters, standard Φ3.5 three-pin plug outpu.
- Non-linearity ± 3% (10% ~ 120% rated input current) two output forms of current and voltage (voltage output type built-in sampling resistor)..
- Package Include 4Pcs x SCT-013-000 Split Core Current Transformer Sensor.
Check StockAC Current Sensor Transformer, PZCT-02 Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter Used for Energy Meter in Special,Current Sensors
- ❤Specification❤Opening size: 13mm × 13mm.
- lead length: 1.5 meters, standard Φ3.5 three-pin plug outpu.
- ❤Applications❤Suitable for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc..
- ❤Reliability❤Fully compatible with most similar products.
- the number of opening and closing times is not less than 1000 (tested at 20℃).
- this split core current transformer is particularly suitable which can use for a long time for DIY use and it works well with arduino and raspberry pi..
- Non-linearity ± 3% (10% ~ 120% rated input current) two output forms of current and voltage (voltage output type built-in sampling resistor)..
- Package Include 2Pcs x SCT-013-000 Split Core Current Transformer Sensor.
Check Stock1PCS SCT013-015 15A 1V Non-invasive Split Core Current Transformer Sensor
- Non-invasive Split Core Current Transformer.
- 1.5m leading wire,3.5 3 core plug standard output.Two form of output current, voltage (voltage output built-in the sampling resistor).
Check StockCurrent Transducer, SZT15-CH-420E Current Transducer Transmitter Transformer Sensor AC Current Converter 0-50A,Stable Performance
- 【DC Current Output Signal】 - The SZT15-CH-420E AC current transducer provides real-time isolated measurement of AC current in the grid or circuit and converts it to a 0-5V / 0-10V or 4-20mA DC current output signal ..
- 【Withstand Voltage】 - Through-heart structure design, insulation withstand voltage up to 2000V AC. The measured current AC: 0-10A / 20A / 50A can be selected..
- 【Usage】 - Magnetic hysteresis less than 1%, can be used in strong magnetic field conditions. The current transducer is used for AC current monitoring, detection, current overload protection, and is also used as an electronic switch for automatic control systems..
- 【High Performance】 - The outer casing is made of self-extinguishing material, it has the characteristics of strong overload ability, high precision, high isolation, high security, low power consumption and strong anti-interference ability..
- 【Easy To Installation】 - There is no need to connect the dc series into the circuit during measurement, safe isolation of input and output. It is suitable for various applications requiring current and voltage conversion..
Check Stock