Reviews Spiral Weld Steel Pipe

FiberWeld Pipe Repair Cast 2x48 Inch – High Strength Adhesive Fiberglass Wrap – White

  • J-B Weld FiberWeld 1” Pipe Repair Cast: A high-strength one-time use fiberglass wrap, impregnated with a specially formulated anti-corrosive resin providing a permanent & protective adhesion to a wide variety of pipes. When activated by water, the product forms a strong, permanent bond that hardens like steel in 15 minutes. All you have to do is wet, apply and let it dry and in 15 minutes it hardens like steel!.
  • Cure and Set Time: Once the product is dipped in water for 5-7 seconds, you will have between 5-10 minutes to work with the product and then it will fully cure in 15 minutes!.
  • Product Features and Strength: J-B Weld FiberWeld 1” Pipe Repair Cast can withstand household water pressure and has a bend strength of 1800 PSI. Once the product is fully cured, it can be sanded and painted! The kit includes a pair of gloves, an epoxy putty stick and a securing bandage!.
  • Great For Repairs On: Copper, Cast Iron, PVC, ABS, Galvanized Steel, Rubber and more!.
Check Stock

Permatex - 80333 - Muffler & Tailpipe Putty 4 oz net wt 2 foil pouches

  • Jb Weld Extreme Heat: Is Formulated For Repairs To Iron, Steel And Metal In High Temperature Environments 1000°F / 537°C. Non-Flammable, It Contains....
  • The Original Cold Weld: Jb Weld Was Developed As An Alternative To Torch Welding. Designed To Be Effective In Extreme Environments, Once It Sets, It....
  • Simple To Use: When Fully Cured, This Metallic Compound Can Be Drilled, Machined Or Sanded. It Is Great For Repairing Cracks, Small Gaps, Seam....
  • Versatile & Dependable: Ideal For Repair Work On : Exhaust Manifolds, Pipe Connections, Mufflers, Catalytic Converters, Outdoor Grills, Fire Boxes,....
Check Stock

LGXEnzhuo Pipe Cutter Pipeline Hydraulic Pipe Cutting Machine Fire Steel Pipe Cutting Machine Can Cut Pipe Diameter 40-280mm 220V 750W

  • 【WIDE APPLICATION】Pipeline hydraulic pipe cutting machine is used for ordinary steel pipe galvanized pipe, plastic-lined pipe, spiral pipe and seamless steel pipe cutting. Widely used in pipeline construction related to fire protection, construction, water supply mines, coal mines, etc..
  • 【PARAMETER】Diameter of steel pipe that can be cut:40-280mm.
  • The wall thickness of the steel pipe that can be cut:3-6mm.
  • 【HIGH EFFICIENCY】Copper motor, power 750W, with high efficiency, stable performance and long service life..
  • 【HIGH STRENGTH BLADE】High strength blade is made of high quality steel to ensure good cutting effect..
  • 【DURABLE】Thicker roller, more wear-resistant.Strong, sturdy frame, suitable for heavy duty operation..
Check Stock

CWI Gifts 18" Rustic Cotton Snowman Pick, Multi

  • Made of stainless steel, is not easy to bend, accuracy of reading.
  • Measurements read in standard on one side, and metric on the opposite side.
  • The scale is calibrated in fractional dimensions from 1/32 to 3/16 inch in 1/16 inch increment markings.
  • Welding Gage is designed for internal alignment and determining root weld spacing.
  • The gauge measures internal mismatch of pipe wall, scribe lines, weld fillet and crown height.
Check Stock

INTSUPERMAI Pipe Cutter Round Pipe Cutting Machine Pipeline Hydraulic Ppipe Cutting Machine Electric Hydraulic Fire Pipe Galvanized Pipe Cutting Machine 220V

  • Pipeline hydraulic pipe cutting machine is used for ordinary steel pipe galvanized pipe, plastic-lined pipe, spiral pipe and seamless steel pipe cutting. Widely used in pipeline construction related to fire protection, construction, water supply mines, coal mines, etc..
  • Diameter of steel pipe that can be cut:40-280mm, The wall thickness of the steel pipe that can be cut:3-6mm, Jack load:5T, Power:750W, Voltage:220V.
  • Automatic return design: Rotate 90° clockwise to tighten the hydraulic oil valve, then press the handle down, turn 90° counterclockwise to loosen the hydraulic oil valve, and the cutting blade returns to its original position.
  • Triangle bracket: stable bracket with roller design, adjustable roller distance, suitable for different pipe diameters, adjustable bracket height, easy to lay the tube flat and cut the tube without deviation.
  • Comes with five roller, which is suitable for cutting pipes of different sizes..
Check Stock

Exhaust Tip 2.25' Inlet 5.50 X 3.00' High 7.00' Double Wall Rolled Oval Resonated Stainless Steel

  • 2.25" Inlet 5.50 X 3.00" High 7.00" Double Wall Rolled Oval Resonated Stainless Steel.
  • Fits a 2.25 Exhaust Pipe 5.50 X 2.25 Inch Outlet.
  • Polished Stainless Steel (Please measure to make sure it fits your Car or Truck) Fits a 2.25 Exhaust Pipe.
Check Stock

Oatey 30751 House Primers, 8 oz, Clear, 8 Fl Oz

  • Clear Primer, NSF listed (National Sanitation Foundation).
  • Clear aggressive primer used on PVC (polyvinyl chloride) and CPVC (chlorinated polyvinyl chloride) pipe and fittings.
  • Low VOC (volatile organic compound) solvent cement.
  • A clear aggressive primer for use on PVC and CPVC pipe and fittings.
  • Lo-V. O. C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
  • Removes surface dirt, grease and grime as well as softens the pipe surface to allow a fast, secure solvent weld.
  • Lo-V.O.C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
Check Stock

HITBOX 4 in 1 Aluminum MIG Welder 200Amp 110V/220V Smart Control IGBT DC Inverter TIG Welder + MMA Stick Mix Gases Gasless Flux Solid Core Wire Welding Machine

  • 【ALL in ONE】 Smart welder for everyone. HITBOX 4 in 1 Function welder starts welding with a button! Choosing weld mode, material, weld wire,....
  • 【Multi-Material Weldable】HITBOX MIG200P inverter welder could weld aluminum, iron, carbon steel, stainless steel, etc. Applies to pipe....
  • 【MIG/MAG Welder】 1. MIXGAS can use 0.6 / 0.8 /0.9/ 1.0mm flux wire. With 0.6 / 0.8 / 1.0mm wire, it can be welded with a thickness of 0.6-3.4mm.....
  • 【TIG /WIG Welder】 Suitable for 1.6 mm and 2.4 mm tungsten. With 1.6 mm tungsten, it can be welded with a thickness of 1.0 to 4.8mm, and with 2.4....
  • 【MMA /ARC Welder】Current 40-170 amperes. 2.5 / 3.2 / 4.0mm electrodes can be welded. Welding thicknesses from 1.6 to 6.4 mm can be welded using....
Check Stock

uxcell Round Weld Nuts, M10 x 14mm x 13mm Weld On Bung Female Nut Threaded - 201 Stainless Steel Insert Weldable 4pcs

  • 【HIGH QUALITY】-All the weld nuts are made of high quality carbon steel, have high hardness, perfect wear and rust resistance, smooth surface without burr..
  • 【ADVANTAGE】-Flat solder joints, high-quality steel ,good weld ability, thread size accuracy..
  • 【SIMPLE TO USE】-First, clean the welding surface, using sandpaper or steel brush to remove the joint oxide.
  • Second, welding a little bit and adjust the verticality of the thread.
  • 【MULTI APPLICATION】-Used for pipe furniture, tables and chairs, shelves, vehicles, trolley casters and other threaded connection..
Check Stock

SYKRSS 2 inch Inlet Muffler Exhaust 2' to 3' Exhaust Muffler Resonator Tailpipe Tips 14.8' Length Tail Muffler with Blue Burnt Exhaust Tip Fit For Car Truck

  • Dimension: 2 inch inlet, 3 inch outlet, Overall Length: 14.8 inch. NOTE : Universal muffler fit 2" OD pipe, but Not fit 2" ID pipe. Please measure the OD of your exhaust pipe before ordering..
  • High Quality Material: SYKRSS exhaust tip built with mirror polished stainless steel & blue plating. Muffler is made of two layers of stainless steel and premium sound-absorbing cotton, which help reduce vibration and absorb sound, durable and Anti-corrosive, never Rusty. Perfectly decorate the exhaust pipe of your car..
  • 2 in 1 Design: This is a 2 inch muffler with blue burnt exhaust tip, design with thick wall straight cut and can be easily weld on the exhaust tip pipe..
  • Wide Application: Universal fits any 2.0" Outlet or 2.1" Inlet trucks car exhaust tail pipe. No instruction is included. Professional installation is highly recommended..
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 2" muffler, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible..
Check Stock