Reviews Spiral Flute Design

IRWIN Screw Extractor, Spiral Flute, 6-Piece (53545)

  • Designed to remove broken studs, bolts, socket screws, and fittings.
  • Aggressive left hand spiral design for extra gripping power.
  • Easy out style spiral flutes embed themselves to increase grip as resistance increases.
  • Extractor size and recommended drill bit size are etched on each tool.
  • Set includes spiral flute screw extractors sizes EX-1, EX-2, EX-3, EX-4, EX-5, and EX-6.
Check Stock

IRWIN Screw Extractor/ Drill Bit Set, 10-Piece (11119)

  • Designed to remove broken studs, bolts, socket screws, and fittings.
  • Aggressive left hand spiral design for extra gripping power.
  • Easy out style spiral flutes embed themselves to increase grip as resistance increases.
  • Extractor size and recommended drill bit size are etched on each tool.
  • Set includes spiral flute screw extractors sizes EX-1, EX-2, EX-3, EX-4, EX-5.
  • drill bit sizes 5/64", 7/64", 5/32", 1/4", 19/64", and a metal index case.
Check Stock

HOZLY 1/8 Inch Shank Carbide End Mills(3.175x17mm) Up & Down Cut CNC Spiral Router Bits 2 Flutes Milling Cutter for Engraving Milling 3D sculpturing Roughing Composite Multilayer Pack of 5

  • Up Down Cut,1/8″ Shank X 1/8″Cutting Dia, 17mm Flute Length with 2 Spiral Flutes, Total length 38 mm, 5 pieces per pack.
  • The Unique Flute Design makes cutting process easier and faster, Smooth Cutting Without 2nd polishing process, ALTIN-Coated Improved the bits service life.
  • Due to the Great hardness of solid Tungsten carbide, it provides excellent abrasive and wear-resistance, Bits Stay Balanced during High Speed rotation process.
  • Fast Chip-Removal volume and Speed, Non-stick With bits, Suitable For Composite multilayer board, hard wood, polywood, acrylic.
  • Double Flute Spiral Solid Carbide Up-Down Cut End mill Router bits are widely used For CNC Engraving, Milling, Roughing, Hollowing, 3D sculpturing purposes.
Check Stock

Fdit HSS CNC Lathe Straight Shank 4 Flute End Mill Cutter Drill Bit Tool 12mm

  • Single flute design for applications in plastics and composites.
  • Left hand spiral routers drive chips downward, preventing delamination in multi-layered workpieces.
  • Polished flute improves chip evacuation by reducing.
  • Optimized geometry for increased material removal rates.
Check Stock

OSCARBIDE 1/8\Shank Ball Nose Carbide End Mills CNC Spiral Router Bits 2 Flutes Milling Cutter for Engraving Milling 3D sculpturing Roughing Acrylic Wood PVC Aluminum 10pcs

  • Ball Noze type,1/8" Shank X 1/8"Cutting Dia, 17mm Flute Length with 2 Spiral Flutes, Total length 38 mm.
  • Carbide Ball End mill Router bits are widely used For CNC Engraving, Milling, Roughing, Hollowing, 3D sculpturing purposes.
  • Due to the Great hardness of solid Tungsten carbide Material, it can easily remove materials like Wood, acrylic, PVC, cooper, aluminum, and steel, MDF, Resin, PCB.
  • Double Flute Spiral Design Improved the chip removal efficiency, surface mirror finish prevent chips from sticking to bits, which makes cutting more smooth.
Check Stock

SpeTool Single Flute (O Flute) Spiral End Mill Aluminum Cutter Carbide Router 1 inch Cutting Length with 1/4Inch Shank for Aluminum Acrylic PVC MDF Plastic

  • Solid Carbide Spiral Router Bit with 1/4inch Shank and 1/4 inch Cutting Diameter, 1 inch Cutting Length, 2-1/2 inch for Total Length.
  • Up Cut, Flat Top with Single Flute, Material: HRC55 Tungsten Carbide.
  • Used for Carving, Cutting, Slotting, Milling, Hollow Cutting in Materials Like Hardwood, Medium Density Board, Nylon, Resin, ABS, Acrylic, PVC, MDF, etc.
  • The Design of Single Flute, Larger Spiral Chip Space and Mirror Polishing of CNC Router Bit Makes Non-stick Crumbs, Smooth Cutting and Fast Chip-removal.
  • There are 1 Pieces of CNC Router Bit In One Package, Coming with Storage Case.
Check Stock

Bosch RC2124 3/4-Inch by 12-Inch SDS Plus Carbide Rebar Cutter for Drilling with Rotary Hammers , Gray

  • DURABLE: High-quality carbide tip for masonry and concrete drilling.
  • USE WITH: For use with most SDS-plus rotary hammers in rotation mode.
  • SPEED: Unique flute geometry with steep spiral removes debris fast.
  • VERSATILE: Ideal for drilling through rebar and concrete with rebar.
Check Stock

FTG USA Replacement Wood Countersink Drill Bit Set 3 Piece Same Size #6 9/64 Parabolic Flute Taper Point for Woodworking with Straight Shank - Tapered HSS M2 Drill Bit Only

  • FTG Parabolic Flute offers wider flute space, dispersing chips away from the cutting edges more rapidly and increasing coolant flow. The parabolic spiral allows chips to flow up quickly leaving less damage to be corrected after drilling. Package contains 3 Piece Same Size 9/64" (#6 screw) Replacement Tapered Drill Bit Only Without Four-cutter Countersink, made to replace the 9/64” bit of #6 Countersink FTG 6810PRB.
  • FTG Parabolic Flute allows chips to flow up quickly leaving less damage to be corrected after drilling. Improved chip evacuation leads to a better surface finish in the hole. The parabolic drill tip can slip-on wood surfaces.
  • it is recommended to hold it rigidly and drill slowly until the tip grabs the material.
  • Higher Quality cutters FTG Parabolic Flute drill bits are manufactured from premium High Speed Steel M2 Grade 6542. Parabolic flutes are constructed with a wider flute shape for increased chip flow.
  • THIRD-PARTY TESTED High Speed Steel M2 countersink drill bit for wood with tapered drill bits. FTG Parabolic Flute drill bits are premium products, they are higher quality cutters. Due to their unique design, with improved chip extraction, FTG Parabolic Flute drill bits drill holes faster than other drill models.
Check Stock

OCGIG 6-65mm Large Titanium Coated Step Drill HSS Spiral Groove Cone Drill Bit Hole Cutter

  • Material:：High Speed Steel(HSS) with Titanium Coated.
  • Self starting：no need for a pilot hole.Cobalt coated to reduce friction and run at cooler temperature..
  • Spiral Design：3 Flute spiral blade design makes the cutting faster and smoother, and automatically deburred from the hole when the drill bit is drilled.
  • Application：Suitable to cut holes in a variety of material like iron plate, aluminum plate, insulation boards, PVC sheet, ect.
  • Package includes：1 x 6-65mm HSS Groove Step Drill (13 Steps:6mm, 10mm, 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm, 65mm).
Check Stock

uxcell Spiral Flute Taps M12 x 1.75 + 0.03 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap

  • Spiral Flute Taps: Thread Size: M12 x 1.75 + 0.03.
  • Square End Size: 7mm / 0.28". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction..
  • Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
  • Special Design: Enlarge the tap to suit the workpiece that needs electroplating or sandblasting after tapping. According to the thickness of the coating, an amplification of 0.03-0.1mm is generally used. It has high hardness and toughness, wear resistance, heat resistance..
  • Easy to Use: Used on drilling and tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
  • Tips: Prone to chipping or breaking due to speed overload or non-vertical tapping. Use the correct tapping too....
Check Stock