Reviews Spindle And Hub Kits

VIRTIONZ Trailer Axle Kits with 4 on 4 Bolt Idler Hub & 1 Round BT8 Spindle -2pack

  • Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1".
  • 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4".
  • 2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Check Stock

JDMSPEED 2 Trailer Idler Hub Kits 5 on 4.5 Replacement for Axle 1-1/16 Bearings 2000 lbs - 22016K

  • Set of 2 New trailer idler hub kits 5 on 4.5 for 2,000 lbs trailer axle, for 1-1/16" straight spindle.
  • Kits also include: 4x L44649 outer cone bearings, 2x Grease seals 1-1/16", 2x E Z lube grease caps with rubber plug.
  • Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed.
  • Note: This hub fit straight spindles, not for tapered spindles.
Check Stock

LIBRA Set of 2 Trailer Idler Hub Kits 5 on 4.5 for 1-1/16 Straight Spindle 2000lbs Axles- 22016K

  • Set of 2 New trailer idler hub kits 5 on 4.5 for 2,000 lbs trailer axle, for 1-1/16" straight spindle.
  • Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed.
  • Kits also includ: 4x L44649 outer cone bearings, 2x Grease seals, 2x E Z lube grease caps with rubber plug.
  • pls noted, this hub fit straight spindles, not for tapered spindles.
Check Stock

Southwest Wheel R30484X 84 Spindle & 6-5.5\ Bolt Circle Trailer Hub

  • Round R40842X 42 Spindle & 6-5.5" Bolt Circle Trailer Hub..
  • 6 studs 5.5" Bolt circle using 25580 inner and 15123 outer bearing hub..
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts..
  • 42 Spindle, Spindle width =2" Spindle length=8" Overall length =13" Capacity (pair) 4,000 lbs..
Check Stock

SOUTHWEST WHEEL 5-Hole, 4.5\ Bolt Circle Idler Hub for 2,000 lb. Axles (BT8 Spindle) 1\ Spindle

  • Round R30484X 84 Spindle & 6-5.5" Bolt Circle Trailer Hub..
  • 6 studs 5.5" Bolt circle using L68149 inner and L44649 outer bearing hub..
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts..
  • 84 Spindle, Spindle width =1 3/4" Spindle length=4" Overall length =8 7/8" Capacity (pair) 3,000 lbs..
Check Stock

Rigid Hitch Trailer Hub Kit - for 1-3/8\ Inner / 1-1/16\ Outer Tapered Spindle - 5 Bolt on 4-1/2\ Bolt Circle

  • Round R30484X 84 Spindle & 5-4.5" Bolt Circle Trailer Hub.
  • 5 studs 4.5" Bolt circle using L68149 inner and L44649 outer bearing hub.
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts.
  • 84 Spindle, Spindle width =1 3/4" Spindle length=4" Overall length =8 7/8" Capacity (pair) 3,000 lbs.
Check Stock

RIGID HITCH INCORPORATED Pair of 4-Bolt on 4 Inch Hub Assembly (AKSQ-200044) Includes (2) Square Shaft 1 Inch Straight Spindles & Bearings

  • Round R30484X 84 Spindle & 5-5" Bolt Circle Trailer Hub.
  • 5 studs 5" Bolt circle using L68149 inner and L44649 outer bearing hub.
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts.
  • 84 Spindle, Spindle width =1 3/4" Spindle length=4" Overall length =8 7/8" Capacity (pair) 3,000 lbs.
Check Stock

Trailer Hub Spindle Nut Washer Kit

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

RIGID HITCH INCORPORATED Pair of 4-Bolt On 4 Inch Hub Assembly (AKSQ-220044) Includes (2) Square Shaft 1-1/16 Inch Straight Spindles & Bearings

  • Round R50642X 42 Spindle & 8-6.5" Bolt Circle Trailer Hub..
  • 8 studs 6.5" Bolt circle using 25580 inner and 14125A outer bearing hub..
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts..
  • 42 Spindle, Spindle width =2 1/4" Spindle length=6" Overall length =11 1/16" Capacity (pair) 5,000 lbs..
Check Stock

The ROP Shop Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (1) Idler Hub with Lug Nuts, (1) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (2) Inner/Outer Bearings, (1) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (1) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock