Reviews Special Pcb

QWinOut Q705 Six-axls Folding Arm Hexacopter Aircraft Frame Kit 705MM 6-Axls Airframe with Landing Gear Skid for DIY Drone

  • F550 is a multi-rotor designed for all pilots for fun or AP..
  • Using high strength compound PCB frame board, which makes wiring of ESCs and battery more easily..
  • Made by advanced engineering material, super strong & smooth Kit.
  • It can be applied for entertainment, aerial photography, FPV and other activities..
  • New design PCB board special for F550,support standard flight controller like MK, KK, FF, MWC, APM.
Check Stock

MATEK Mini Power Hub PDB XT60 Power Distribution Board PDB-XT60 with BEC 5V/12V for FPV Drone Quadcopter QAV210 QAV-R QAV-X

  • F550 is a multi-rotor designed for all pilots for fun or AP..
  • Using high strength compound PCB frame board, which makes wiring of ESCs and battery more easily..
  • Made by advanced engineering material, super strong & smooth Kit.
  • It can be applied for entertainment, aerial photography, FPV and other activities..
  • New design PCB board special for F550,support standard flight controller like MK, KK, FF, MWC, APM.
Check Stock

Yellow Sanwa LB35 Balltop for JLF Joysticks

  • Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
  • Replacement microswitch PCB for Sanwa JLF series Joysticks.
  • Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
  • Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
  • Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check Stock

uxcell PCB Drill Bits 4mm Tungsten Carbide Spiral Flute Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8\ Shank

  • Specifications: Cutting edge diameter (CED): 4mm / 0.157".
  • Long Tool Life: Made from tungsten carbide, high hardness, high wear resistance, high strength, resistance to bending, anti-impairment, long service life..
  • Spiral Flute Bits: Spiral flute drill bits reduce cutting force and prevent drill broken, improve the drilling accuracy. Large drill bit chip space, chip resistance, chip smooth, small drilling heat..
  • Precision: With sharper cutting edge, milling groove and clean surface, the carbide PCB drill bits can work quickly and cleanly, no glitches or scrap left..
  • Applications: Great for PC boards, plastics, fiberglass, wood, soft metals. Suitable for PCB drilling machines, engraving machine, CNC and high precision special drilling equipment..
Check Stock

uxcell PCB Drill Bits 3.5mm Tungsten Carbide Spiral Flute Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8\ Shank

  • Specifications: Cutting edge diameter (CED): 3.5mm / 0.138".
  • Long Tool Life: Made from tungsten carbide, high hardness, high wear resistance, high strength, resistance to bending, anti-impairment, long service life..
  • Spiral Flute Bits: Spiral flute drill bits reduce cutting force and prevent drill broken, improve the drilling accuracy. Large drill bit chip space, chip resistance, chip smooth, small drilling heat..
  • Precision: With sharper cutting edge, milling groove and clean surface, the carbide PCB drill bits can work quickly and cleanly, no glitches or scrap left..
  • Applications: Great for PC boards, plastics, fiberglass, wood, soft metals. Suitable for PCB drilling machines, engraving machine, CNC and high precision special drilling equipment..
Check Stock

uxcell PCB Drill Bits 4.45mm Tungsten Carbide Spiral Flute Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8\ Shank

  • Specifications: Cutting edge diameter (CED): 4.45mm / 0.175".
  • Long Tool Life: Made from tungsten carbide, high hardness, high wear resistance, high strength, resistance to bending, anti-impairment, long service life..
  • Spiral Flute Bits: Spiral flute drill bits reduce cutting force and prevent drill broken, improve the drilling accuracy. Large drill bit chip space, chip resistance, chip smooth, small drilling heat..
  • Precision: With sharper cutting edge, milling groove and clean surface, the carbide PCB drill bits can work quickly and cleanly, no glitches or scrap left..
  • Applications: Great for PC boards, plastics, fiberglass, wood, soft metals. Suitable for PCB drilling machines, engraving machine, CNC and high precision special drilling equipment..
Check Stock

MKS Gen L V2.1 3D Printer Integrated Motherboard Controller PCB Board A4988/DRV8825/TMC2208/TMC2130 Like Ramps 1.6 MKS Gen V1.4 Mainboard

  • Integrate 2560 and Ramps1.4 one PCB,easier wiring and more stable..
  • Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly..
  • Support a variety of stepper drivers:4988,8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS..
  • TFT24/28/32/35 & Available to connect external large stepp drivers Accept 24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently..
  • Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces..
Check Stock

MKS Gen L V2.0 3D Printer Integrated Motherboard Controller PCB Board A4988/DRV8825/TMC2208/TMC2130 Like Ramps 1.6 MKS Gen V1.4 Mainboard 1PCS

  • ❤️ Integrate 2560 and Ramps1.4 one PCB,easier wiring and more stable.
  • ❤️Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly.
  • ❤️ Support a variety of stepper drivers:4988,8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS.
  • ❤️TFT24/28/32/35 & Available to connect external large stepp drivers Accept 24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently.
  • ❤️Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces.
Check Stock

Arcade Fight Stick Street Fighter Arcade Joystick Keyboard control Fighting box PXN X8 For Nintendo Switch/PS4/PS3/XBOX Series X/S/XBOX S/X,PC

  • Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
  • Replacement microswitch PCB for Sanwa JLF series Joysticks.
  • Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
  • Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
  • Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check Stock

4X Prototype PCB for Arduino Mega 2560 R3 Shield Board DIY

  • Prototype PCB for Arduino Mega 2560 R3 Shield Board DIY..
  • PCB Dimension: 101.6mm x 53.34mm / 4" x 2.1".
  • PCB Thickness: 1.6mm / 0.063", Material: high quality FR-4 glass fiber PCB..
  • All holes are plated through. Top and bottom side are identical copper layers. Pads grid (pitch) 2.54mm / 0.1", hole diameter 0.9mm..
Check Stock