Reviews Special High Pressure Hose

BorgWarner 13009097049 Super Core Assembly (Super Core Assembly SX-E S300SX-E 9180 (66mm Ind. / 91mm Exd.)), 1 Pack

  • 4-Ply Reinforced High Temperature Silicone Coupler and The hose material is high quality silicone Reinforcement is stronger made with Silicone fluorine polyester or Silicone fluorine nomex.
  • Min temperature: -60 C/-140 F. Max temperature: 260 C/500 F. work pressure: 0.3 to 0.9 MPA. Bursting Pressure: 2MPA. Size tolerance: +/- 0.5MM.
  • 4-Ply Hose for the most demanding applications and is able to withstand high boost pressure. Perfect for use with Turbocharger, Supercharger, Intake, and Intercooler system applications. NOTE: Silicone hose is NOT compatible with fuel or oil.
  • Inner Diameter: 3". Length: 6'' (152mm). Wall Thickness: 5mm. Polyester or Nomex layers to enable high temp and pressure than original rubber hose dose. .It is excellent resistance to Ultraviolet radiation,water,ozone and oxygen.
  • High quality T bolt clamp with Nylon insert locknut performance-engineered for long-term durability. T bolt Clamp provides leak-proof connections in a wide variety applications of Industrial, Automotive and Special Equipment. LTI Provided 12 months warranty from the date of purchased and Free return within 30 days NO QUESTION ASK..
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL INJECTION GAUGE: The car fuel pressure diagnostic test kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or high pressure fuel track on direct-injection engine, due to the fuel gauge's low pressure range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • 3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
  • PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Pleas....
Check Stock

2' x 50ft PVC Lay Flat Discharge Hose With Aluminum Camlock C & E Fittings, Cam Lock Fitting Type A included, Heavy Duty Reinforced Pump Backwash Hose Assembly

  • [HIGH QUALITY]: Pump Discharge hose is made of PVC material reinforced with high tensile strength polyester yarn, 2" Female Type C Coupler x 2" Male Type E Connector is installed on both ends of hose by stainless steel clamps, high pressure, sturdy and durable, abrasion resistance, anti-aging, chemical resistance, you can use for a long time..
  • [SIZE]: Backwash pump hose, standard 2 inch diameter, Flat width 3.4 inch.
  • 2 in Aluminum cam lock fittings type C, type E and extra TYPE A adapter. Length: 50 feet.
  • Temperature Range: 23°F to 149°F (-5°C to 65°C).
  • [TYPE A FITTINGS]: The item include a type A (male adapter x female NPT threaded ) cam and groove hose fitting, you can directly screw onto pump male threaded outlet, then realize quick connect or disconnect between discharge hose assembly with pump..
  • [NO LEAK]: Pool Backwash hose doesn’t leak or burst within 90 psi working pressure. Because the delivery hose body adopts fine double-sided coating and fiber reinforcement. The camlock coupling shank is special multi-section structure and added black rubber ring and sealant at the connection..
  • [WIDELY USED]: Ideal for draining swimming pools, backwash pool filter, sewage pump, sump pump, trash pump, pool drain and sand fil....
Check Stock

2' x 50ft PVC Lay Flat Discharge Hose With Aluminum Camlock C & E Fittings, Cam Lock Fitting Type F included, Heavy Duty Reinforced Pump Backwash Hose Assembly

  • [HIGH QUALITY]: Pump Discharge hose is made of PVC material reinforced with high tensile strength polyester yarn, 2" Female Type C Coupler x 2" Male Type E Connector is installed on both ends of hose by stainless steel clamps, high pressure, sturdy and durable, abrasion resistance, anti-aging, chemical resistance, you can use for a long time..
  • [SIZE]: Backwash pump hose, standard 2 inch diameter, Flat width 3.4 inch.
  • 2 in Aluminum cam lock fittings type C, type E and extra TYPE F adapter. Length: 50 feet.
  • Temperature Range: 23°F to 149°F (-5°C to 65°C).
  • [TYPE F FITTINGS]: The item include a type F (male adapter x male NPT threaded ) cam and groove hose fitting, you can directly screw onto pump female threaded outlet, then realize quick connect or disconnect between discharge hose assembly with pump..
  • [NO LEAK]: Pool Backwash hose doesn’t leak or burst within 90 psi working pressure. Because the delivery hose body adopts fine double-sided coating and fiber reinforcement. The camlock coupling shank is special multi-section structure and added black rubber ring and sealant at the connection..
  • [WIDELY USED]: Ideal for draining swimming pools, backwash pool filter, sewage pump, sump pump, trash pump, pool drain and sand fil....
Check Stock

WILTEEXS 18709 3/8-Inch Stainless Steel Quick Connect Pressure Washer Adapter Set, Max Pressure 5000 PSI Rating

  • 【Special Improvement】Quick connect capable coupler with great fit, finish and function. There is no problem with attaching your quick couplers to this gun swivel. Allows you to spin gun on the hose which is extremely helpful when washing vehicles.
  • 【Quality Assurance】Any problem,feel free to contact us.The professional team is always ready to serve you.
  • 【Quality Assurance】Any problem, feel free to contact us. The professional team is always ready to serve you.
  • 【Compatibility】These high-pressure washer fittings can be used to attach a hose to the water pumps, hose reels, ball valves, telescoping wands, surface cleaner or regular spray guns.
  • 【Characteristics】3/8″quick connect pressure washer adapter set is made of high quality and durable stainless steel. More rust and corrosion resistant than brass material pressure washer accessories.
Check Stock

PneumaticPlus RED EPDM synthetic Rubber Air & Water Hose 1/4\ ID x 0.53\ OD with 1/4\ NPT Male Fitting Connections (6 FT)

  • 003c/b003e[HIGH QUALITY]:003c/b003e Pump Discharge hose is made of PVC material reinforced with high tensile strength polyester yarn, 3" Female Type C Coupler x 3" Male Type E Connector is installed on both ends of hose by stainless steel clamps, high pressure, sturdy and durable, abrasion resistance, anti-aging, chemical resistance, you can use for a long time..
  • 003c/b003e[SIZE]:003c/b003e Backwash pump hose, standard 3 inch diameter, Flat width 4.85 inch.
  • 3 in Aluminum cam lock fittings type C, type E and extra TYPE A adapter. Length: 50 feet.
  • Temperature Range: 23°F to 149°F (-5°C to 65°C).
  • 003c/b003e[NO LEAK]:003c/b003e Pool Backwash hose doesn’t leak or burst within 90 psi working pressure. Because the delivery hose body adopts fine double-sided coating and fiber reinforcement. The camlock coupling shank is special multi-section structure and added black rubber ring and sealant at the connection..
  • 003c/b003e[WIDELY USED]:003c/b003e Ideal for draining swimming pools, backwash pool filter, sewage pump, sump pump, trash pump, pool drain and sand filter pumps etc.
  • widely used in household, mine, factory, agriculture, and architectural engineering.
  • This drain hose can adapt to most outdoor conditions and all seasons..
Check Stock

Schwinn multi use frame to floor pump

  • 【Dual Valve Design】- Bike tire pump has two valves for Presta and Schrader. The double valve design allows you to inflate more conveniently. You can inflate your tire without switching adapters..
  • 【Upgrade Accessory Box】- Bike pump has a tool box includes three parts, not easy to lose. The integrated design makes box and hose can be stored well and easy to carry..
  • 【High Pressure】- Bicycle pump is max 150PSI(10Bar) high pressure capacity, ergonomic T-handle provides great grip and pushing power..
  • 【Lightweight and Durable】- The air pump is made of seamless steel, which not only has a beautiful appearance, but also has better corrosion resistance. The hose is made of a special high temperature rubber hose, not easy to break and damage..
  • 【Wide Applications】- This floor pump can inflate for BMX, mountain, road and commuter bikes, electric vehicles, motorcycles, air cushion, swimming ring, basketball, football, air bed and any inflatable balls toys..
Check Stock

YAMATIC Extra Flexible Pressure Washer Hose 25 FT X 1/4', Universal Replacement with M22-14mm & 15mm Fittings Compatible with Sun Joe,Craftsman,Greenworks,Ryobi,Troy Bilt,Briggs&Stratton,3000 PSI

  • [Universal M22 Pressure Washer Hose] The M22-14mm ends hose comes with 2 additional M22-15mm female adapters(attached to the hose already), which are compatible with M22-15mm pressure washers and guns like Sun Joe, Craftsman, AR blue clean, Karcher, etc. After removing the adapters, replace for M22-14mm power washers and guns like Greenworks, Briggs & Stratton, Ryobi, Troy Bilt, Generac, Wen, Honda, Westinghouse, Champion, Craftsman, etc..
  • [Flexible Pressure Washer Hose] New release flexible feature, stays soft during use, provide more comfortable experience than original one. Recommended for light-duty electric high-pressure washers up to 3000 PSI 2.5 GPM. Great Replacement for SUN JOE models: SPX3000, SPX4500, SPX4600, SPX9005-PRO, SPX3200, SPX9008-PRO, SPX4000, SPX3500, SPX3000-MAX, SPX3000-XT1, SPX4600-MAX.(Not fit all models of sun joe, if you’re not sure, please email us for help).
  • [Kink Resistant] Revolutionary flexible material hose merges with the unique high-tech manufacturing process, lays flat easier and kink-resistant during use. Great for home base high-pressure cleaning work, such as Car, Floors, Pool, Motorcycle, Windows, Sidings, Driveways, Decks, Chairs, Roofs, and so on..
  • Tech Tips: A) Not fit special connector electric pressure was....
Check Stock

Y-ASQA 50 ft garden hose ,Commercial Grade Lead-in Hose 5/8 in Dia x 50 foot Heavy duty kink-resistant 150PSI durable high burst strength Rubber Water Hose

  • HEAVY DUTY GARDEN HOSE: 5/8 in. Dia x 50 ft. Heavy Duty Garden Hose Premium Commercial Grade Rubber Water Hose is Heavy duty, kink-resistant and durable.Reinforced for high burst strength..
  • PROFESSIONAL HOSE STRUCTURE：To prevent the hose from bursting or kinking, the durable water hose is constructed of a special water coat surrounded by polyester mesh for reinforcement.resists abrasion and won’t degrade in sun or frost，Flexible in cold weather..
  • HIGH PRESSURE RESISTANCE：Lead-free-aluminum couplings are crush-proof up to 3800 PSI for long-lasting durability，garden hose Withstands burst pressure up to 150 PSI，Crush-resistant couplings avoid leakage..
  • EASY TO CONNECT：At the male coupling, an octagonal nut tightly attaches the flexible hose to a nozzle or sprinkler with the turn of a wrench，Fits all standard faucets and most water accessories for easy connections..
Check Stock

Hromee Air Compressor Hose 1/4 Inch x 25 Feet Hybrid Hose with Fittings, 1/4\ Industrial Quick Coupler and Plug Kit

  • 1/4” x 25’ - Inner Diameter: 1/4 Inch(6.35mm).
  • Hose Length: 25 Feet. Suitable for industrial, contractor, or household use. It is ideal for connecting supply lines, compressors, hose reels. The maximum working pressure is 300PSI and the burst pressure is 900PSI..
  • LIGHTWEIGHT&FLEXIBLE -Hromee Yellow 1/4” x 25 ft. air hose is made from lightweight and durable Hybrid material - an excellent alternative to the traditional rubber air hose. Hybrid combines the flexibility of a rubber air hose with the strength of a PVC hose. It is ultra flexible - even in extreme temperatures, lays flat, and will not kink under pressure..
  • COUPLER&PLUG KIT: We equip one 1/4”NPT brass coupler and one I/M type steel plug that are all ready connected. Heavy duty air fittings are ideal for general purpose applications and the anodized color coating has good durability and high scratch resistance..
  • SPECIAL PROTECTOR DESIGN - Heavy duty bend restrictors provide the durability to avoid kinks, knots, bends and increase the lifetime of the air hose. 1/4 in. brass MNPT end fittings, better against rust than steel and stronger than aluminum..
  • ALL WEATHER USE - The hybrid material make the hose work in extreme cold weather and remain flexible and kink resistant for prolonging using....
Check Stock