Reviews Spark Plug Set

Spark Plug Tester Dual Holes Engine Ignition Coil Tester 500-6000rpm Working Frequency, Car Spark Plug Tester Tool with Protective Cover, Automotive Spark Plug Tester for 12V Gasoline Vehicles

  • 【Spark Plug Tester for Simultaneous Dual-hole Testing】The automotive spark plug tester has two test holes, which can perform dual-hole simultaneous testing. By comparing the intensity of the test spark, an accurate judgment can be made on the quality of the spark plug, and the spark plug can work normally..
  • 【Spark Plug Tester with Operating Frequency from 500 to 6000rpm】The working frequency of the automotive spark plug tester is adjustable, and the range can reach 500 to 6000rpm. The higher the set frequency, the stronger the spark intensity. It can be adjusted as needed..
  • 【Time-Saving and Efficient Spark Plug Tester】The working principle of the car spark plug tester is to test the performance of the spark plug at the same time by simulating engine work, which is more time-saving and efficient. Suitable for spark plugs of most 12V gasoline cars..
  • 【Plug-and-Play Spark Plug Tester Tool】Put the spark plug in the test hole, close the protective cover, connect the power supply and adjust the working frequency, and is equipped with a high-voltage indicator. You can easily observe the spark plug test status through the protective cover..
  • 【Ignition Coil Tester with Protective Cover】The automotive spark tester has a special protective cover d....
Check Stock

ABN Pneumatic Spark Plug Cleaner – Spark Plug Sandblaster Plug Cleaner Tool with Abrasive Universal Sparkplug Cleaner

  • PROLONG THE LIFE OF YOUR SPARK PLUGS: Are your spark plugs underperforming? Clean them up with the ABN Spark Plug Cleaner Pneumatic Sand Blaster....
  • SPARKPLUG SANDBLASTER CLEANER KIT: Includes a spark plug cleaner unit, a fabric spark plug cleaner bag, an airbag clamp, a 1.7 oz (.1lb) bag of....
  • BUILT TO LAST: Constructed of a thick, durable plastic base with brass fittings, and a steel clamp provides this air spark plug cleaner sandblaster....
  • SIMPLE INSTALLATION AND SET UP: 2 mounting flanges on each side allow you to mount the spark plug cleaner machine vertically on a wall or post.
  • EASY TO USE: Hook your compressor to the spark plug tool cleaner and insert the spark plug (electrode-side down) into the rubber cover at the top of....
Check Stock

4 Wire Set Marine Spark Plug Wire Lead Fits for Johnson Evinrude 90 115 HP Outboard Engines OE Replacement 18-8839 9-28092 Premium Ignition Spark Plug Wire Set

  • Boat Wire Technology Plug Wire Kit Fits the Following Vehicles: The ignition spark plug wire set fits for Johnson Evinrude 90, 115 HP 4 cyl | Please check the fitment before placing orders, thanks..
  • Replace OE Number: Plug wire set boat premium wire replacement part number 18-8839, 9-28092 | Great replacement for a proper fit and easy installation, quality materials used, meets or exceeds OEM standards, 100% rigorously tested before shipping..
  • Excellent Function: The spark plug wire is used as the medium between the ignition coil and the spark plug, to power the engine, it can pass the high voltage fire divided by the distributor to the spark plug, and then push the engine to rotate | Damage to the spark plug wire of the engine will cause the engine to misfire, the phenomenon that causes the engine to shake, timely replacement of damaged spark plug wires can extend the life of the engine and reduce fuel waste..
  • OEM Design, Direct Fit: Made of premium silicone and equipped with stainless steel terminals, the pure silicone protective cover provides maximum thermal protection | Even though this is not a genuine original equipment spark plug wire, but it works even better and lasts longer at a much lower price | Save time and hundreds of dollars by replace ....
Check Stock

Spark Plug Tester 0 to 6000rpm Adjustable Spark Tester with Two Spark Plug Socket 100-240v with Protective Cover Ignition Tester Heat Resistance Spark Tester Automotive Tools for 12mm Spark Plug

  • 【Dual Hole Testing & Protective Cover Protection】Spark plug tester has two spark plug socket,it can test two spark plugs (good spark plug & bad spark plug) at the same time.By comparing the spark intensities of the two spark plugs,judge the performance and ignition intensity of the spark plugs,and replace the broken spark plugs in time.The design of the protective cover can prevent you from the risk of electric shock during the test,which effectively guarantees your safety during the operation..
  • 【0~6000rpm Working Frequency Adjustable & More Accurate Data】The automotive tools has a wide adjustment range of working frequency.By operating the rotary switch,you can adjust the working frequency in the range of 0~6000rpm,the higher the set frequency,the stronger the spark intensity.Spark plug tester can also simulate the work of the engine,restore the authenticity of the car rotate speed,save time and high efficiency,and the data is more accurate,which can better test the spark plug..
  • 【High-Quality ABS Material With Impact Resistance & Heat Resistance】Ignition tester is made of high-quality ABS material,which has the characteristics of impact resistance and heat resistance.It can provide you with long-term service and reduce the cost caused....
Check Stock

Champion RCJ6Y Lawn & Garden Equipment Engine Spark Plug Genuine Original Equipment Manufacturer OEM Part

  • 【Affordable Reliable and Built to Last】SHINEHOME aims to offer brand new and high quality Replacement Set of 8 Black Spark Plug Wire Boot Sleeves....
  • 【Compatibility】Fits All Spark Plug Boots And Spark plug boot heat socks Can Withstand Heat rated for 1200°F-1800°F continuous use, 2500°F....
  • 【Product Highlights】Each Boot Is 6inch Length,Boots Will Work With 90 Degree, 45 Degree, And Straight Spark Plug Boots.
  • 【Easy Installation】Just Slip On (Sewn End Over Spark Plug ) For Maximum Protection ,Sleeves Can Withstand Heat Up To 1200 Degrees Using Patented....
  • 【Package】8 Black Spark Plug Wire Boot Sleeves(Note: only fit for vehicles which burning petrol), You Will Enjoy 12 months Once You Order From Us,....
Check Stock

3/8\ Drive Magnetic 3pcs Swivel Spark Plug Socket Set, 5/8-Inch, Magnetic Universal Spark Plug Service Kit, 3 Piece - 4\

  • 3/8-Inch Drive Magnetic Swivel Spark Plug Socket for plug removal and installation.
  • Interior magnet retains the spark plug for positive installation, no more plug sockets dropping into the engine compartment.
  • 5/8-Inch long-reach, 6-Point, Swivel Spark Plug Socket set contains 4”, 6" and 11" lengths for all situations.
Check Stock

AloneGoer 2pcs DPR8EA-9 Spark Plug Compatible with stk 4929 5083 98069-58916 TRX300 TRX300FW GL1100 GL1200 GOLD WING Yamaha 94700-00241 XT600 XV1900 XVZ1200

  • DPR8EA9 (4929) Spark Plug Compatible with CBR600F (1987-1989).
  • Spark Plug for Goldwing 1100-1200 (1982-1984).
  • Spark Plug for Interceptor 700-750 (1984-1991).
  • Spark Plug for Nighthawk 450-650 (1983-1986).
  • Spark Plug for Magna 700, 750 (1984-1995).
  • Spark Plug for Shadow ACE 750 (1998-2000).
  • Spark Plug for Shadow VLX 600 (2002-2007).
  • Spark Plug for Shadow 500-750 (1983-1986).
  • Spark Plug for Shadow ACE 750 (2000-2003).
  • Spark Plug for Shadow VLX 600 (1988-2001).
  • Spark Plug for Kawasaki KLR650 (1993-2009).
  • Spark Plug for Kawasaki Ninja 750R (1990).
  • Spark Plug for Kawasaki Voyager XII ZG1200B (1998-2003).
  • Spark Plug for Suzuki S40-S50 Boulevard (2007-2009).
  • Spark Plug for VS1400GLP Intruder (1991-1996).
Check Stock

ABN Spark Plug Thread Repair Rethreading Set 14mm Metric – Rethreading Tool Kit – Comprehensive Taps Inserts & More

  • REPAIR DEEP-SEATED PLUGS: The ABN Spark Plug Thread Repair Rethreading Set, 14mm Metric – Rethreading Tool Kit is a comprehensive and time-saving kit that incorporates taper and lug taps together with integrated ream to allow you to fix a stripped spark plug threaded port and repair deep-seated plug configurations.
  • VARIOUS APPLICATIONS: High-speed steel (HSS) ST14x1.25 M14x1.25 (14mm thread size) suitable for damaged spark plug threads to clean and rethread spark plug ports with either a tapered seat or a gasket seal type spark plug assembly on a lawn mower, car, or other vehicle engine.
  • Stepped tap ensures correct alignment of cutter in existing spark plug hole.
  • Extension tools allow easy access to the bottom of the plug recess (includes plug inserts).
  • EASY TO USE: Cut a larger threaded hole in cylinder head with tap, screw insert into head, screw plug into insert, use expander to help seat insert by tapping with a hammer.
  • Select insert that covers as much of the plug threads as possible to avoid carbon buildup (this can make unscrewing plug from insert difficult).
  • Use grease on flutes and any cutting tool to catch shavings, clean often, and vacuum when finished (grease not included).
  • EASY STORAGE: Heavy-duty 9.6” x 4.75” x 1.5” inch ....
Check Stock

Thexton Mfg Co 492 Spark Plug Installer/Remover Kit

  • Start and remove spark plugs in deeply recessed cylinder spark plug holes.
  • 6" length is designed for coil-on plug applications and other engines with recessed spark plugs.
  • The shorter version is for other applications where space is limited.
Check Stock

WORKPRO 14mm Magnetic Swivel Spark Plug Socket, 3/8" Drive x 4" Total Length, Enhanced Magnetic Design With Thin Wall Socket, 360 Degree Swivel, 12 Point

  • SPECIFICATIONS: WORKPRO 14mm Magnetic Swivel Spark Plug Socket is 3/8-inch drive and 4 inches long. It features a 12-point design that can grip the flat sides of the fastener head, not corners, to prevent round-off..
  • QUALITY GUARANTEE: This thin wall spark plug socket is made of heat-treated Chrome Alloy, has high hardness, and is not easy to damage when rotating. Chrome-plated mirror finish maximizes the longevity of abrasion and resists rust and corrosion..
  • 360° SWIVEL DESIGN: This spark plug has 360-degree swivel action for maximum flexibility, making tight spaces easily accessible. Flexible angle, able to deal with various situations, saving effort and convenience..
  • MAGNETIC CORE DESIGN: Our magnetic swivel socket set is equipped with a strong magnetic core, the magnet retains and protects the spark plug for easier installation, ensures not easy to lose the plug over time, and minimizes damage..
  • EASY TO USE: The Swivel thin wall socket set is used for spark plug removal and installation. Tightened or adjusted is not needed. It features a 12-point design for enhanced gripping power, knurled grip can help you keep a tight grip to minimize the possibility of slipping in the middle of a job and reduce the chance of hand fatigue..
Check Stock