Reviews Sounding Muffler For Chevy 350

KIPA Carburetor For 1904R 1906R Rochester Quadrajet 4MV Vacuum Secondary 750-cfm electric Choke 4-BBL, Replace for Chevy car truck with 305-350c.i Engine 1980-1989

  • ...Universal Performance carburetors improve throttle response and overall performance throughout the RPM range. Each carb has a distinctly different fuel curve calibrated for a particular application. Do note: Condering the vehicle dispacement range discrepancy, some vehicles may be too rich with black smoke from the muffler, You may have to use The included tool and small copper solid pin to block the air channels to fix it, If you are confused, Message us before any adjustment.
  • Important Tip: As you install the new carb, Gasoline is highly flammable and explosive. You can be burned or seriously injured when handlingfuel. Keep heat, sparks and flame away. You may need to adjust mixture, idle, and float adjustments. Manual is not included, you could find a lot of installation video and manual on tube. Your Powerful CAR deserve A Perfect Carburetor..
Check Stock

LOSTAR 4 x Solid Motor Engine Mount Combo SBC Chevy Frame Mount Rat Rod Hot Street Stock

  • ✅Feature: -This is a Set of Bolt-On Steel Motor Mounts and Chassis Mounts. -This set is designed for Small Block and Big Block Chevy Applications. -Small Block Chevy Engine Mounts replace the upper stock rubber mounts and prevent twist during hard accelerations. -Big Block Chevy frame mount side are directional just like the OEM clamshell type. -All the holes lined up and engine mount bolts went in easily. -These also work great in custom chassis builds..
  • ✅Compatibility: 1974-1981 Camaro & Firebird with 307 & 350, 1973-1988 Chevelle with 307& 350 & 402 & 454, 1973-1979 Nova with 307 & 350, 1976-1990 Impala & Caprice with 307 & 350.
  • ✅Size: -Small Block Chevy Solid Engine Mounts: -Inside to Inside width: 2.5" -Bottom to Center bolt hole: 2" -Frame Motor Mounts: -Overall Length: 6-1/8" -Overall Width: 2-3/8" -Center to center bolt hole length: 5-1/8" -Center to center bolt hole width one: 2-3/8" -Center to center bolt hole width two: 1-3/4".
  • ✅Package Includes: 4 x Motor Mount and Frame Mount Kit.
  • ✅1 Year Unlimited-mileage Quality Guarantee.
Check Stock

Keenso Th350 Kickdown Cable, Silver Stainless Steel Braided Kickdown Cable For 350 Turbo Transmission Assembly Detent Kickdown for Chevy TH350

  • 【Compatibility With】-- Th350 Kickdown Cable, fit for GM(Chevy, Olds, Pontiac, etc.)350 TH350 Transmissions. Please check the vehicle model before purchasing.
  • 【Durable Stainless Steel】-- Our th350 long kickdown cable is made of premium staninless steel material, sturdy and solid, durable for long lasting performance.
  • 【Specifications】-- Material: Stainless Steel, Color: Silver, Package Weight: approx. 160g, Fitment: for GM(Chevy, Olds, Pontiac, etc.)350 TH350.
  • 【Wide Application】-- This ickdown cable for 350 turbo transmission is adaptable to all types of manifolds, universally applied.
  • 【Easy to Install】-- Our kickdown cable turbo 350 is easy to install, very practical and simple, perfect replacement for the old one.
Check Stock

Delkevic Full 4-2 compatible with Yamaha FJR1300 Mini 8' Stainless Round Muffler Exhaust 01-05

  • Delkevic Mini 8″ stainless steel round mufflers are made from high grade 304 stainless steel polished to a mirror finish. This short muffler has a large slash cut outlet and is aggressive sounding with our without the baffle installed..
  • This set includes all necessary hardware to mount the muffler onto the engine. Gaskets are included..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Aftermarket Slip On compatible with Honda ST1300 (2003-2015) with 18" Carbon Fiber Oval Muffler

  • Delkevic 18" carbon fiber oval mufflers are manufactured from a pre-formed carbon fiber composite sleeve and 304 stainless steel. This muffler has the quietest, deepest tone of mufflers we offer. This will be the closest sounding to stock available and best for long haul trips..
  • This set includes all necessary hardware to mount the muffler onto the engine..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Aftermarket Slip On compatible with Honda ST1300 (2003-2015) with 18" Stainless Steel Oval Muffler

  • Delkevic 18" stainless steel oval mufflers are manufactured from high-grade 304 stainless steel and polished to a mirror finish. This muffler is has the deepest, quietest tone of mufflers we offer. It will be the closest sounding to stock and the best choice for long haul trips..
  • This set includes all necessary hardware to mount the muffler onto the engine..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Full 4-2 compatible with Kawasaki Ninja 1000 & Z1000 SS70 9" Stainless Steel Oval Muffler Exhaust 11-20

  • Kawasaki Ninja 1000 (2011-2020) & Z1000 (2011-2016).
  • Delkevic SS70 9" stainless steel oval mufflers are manufactured from high grade 304 stainless steel and polished to a mirror finish. This short muffler is aggressive sounding with our without the baffle installed..
  • This set includes all necessary hardware to mount the muffler onto the engine. Gaskets are included..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Aftermarket Slip On compatible with Honda CBR600 F4i (2001-2006) with SS70 9" Stainless Steel Oval Muffler

  • Delkevic SS70 9" stainless steel oval mufflers are manufactured from high grade 304 stainless steel and polished to a mirror finish. This short muffler is aggressive sounding with our without the baffle installed..
  • This set includes all necessary hardware to mount the muffler onto the engine..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Aftermarket Slip On compatible with Honda VFR800 V-Tec (2002-2009) with Mini 8" Stainless Steel Round Muffler

  • Delkevic Mini 8" stainless steel round mufflers are made from high grade 304 stainless steel polished to a mirror finish. This short muffler has a large slash cut outlet and is aggressive sounding with our without the baffle installed..
  • This set includes all necessary hardware to mount the muffler onto the engine..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Tektall Power Steering Pump Mounting Bracket for SWP LWP Saginaw GM SBC SB Chevy 283 305 327 350 383 400 with long or short water pump 5230F

  • Top Quality Brand new aftermarket Tektall Black Power Steering Pump Mounting Bracket Replacement, made from solid forged steel to resist failure....
  • Fitment: This kit Fits For SWP LWP Saginaw SB Chevy 350 GM SBC, Fits for Chevy 283 305 327 350 383 400, Fits All SB for Chevy Engines 283 305 327 350....
  • New bushings and installation hardware are included As pictured, Mounts on the Drivers Side Bottom of the engine, these brackets fit the A-CAN Saginaw....
  • Whole steering punmp bracket has been redesigned for greater durability and steability. This whole kit has undergone try-on, corrosion and material....
  • Bracket fits a wide variety of applications due to its low or high mounting positions, Easy installation, no drilling or tapping required. Please do....
Check Stock