Reviews Solid Mount

Bulletpoint RubiGrid Dash Mount Platform Phone Holder for 2018+ Wrangler JL (NOT 4xe) + 2020+ Gladiator – Jeep Compatible Multi-Device Mount

  • [CREATE YOUR CUSTOM COMMAND CENTER] Compatible with the 2018+ Jeep Wrangler JL and 2020+ Jeep Gladiator, RubiGrid is the most versatile mounting platform available allowing you to customize your setup and mount your devices exactly where you want them..
  • [SECURELY MOUNT YOUR DEVICES] Our RubiGrid platform dash mount is designed to securely mount phones, tablets, iPads, action cameras, CB radios and more. It is also AMPS compatible..
  • [WRANGLER + GLADIATOR FITMENT] This Rock Solid Phone Mount is built specifically for your 2018-current Wrangler JL & 2020-current Gladiator for an OEM-like fit. Does NOT fit Wrangler 4xe..
  • [TOTALLY FLEXIBLE SYSTEM] Whether you change your mind about device locations or you want to mount new devices, RubiGrid allows you to do exactly that. Easily mount your devices exactly where you want them anywhere along the Laser Cut Metal RubiGrid platform..
  • [ROCK SOLID SYSTEM] After tightening it down and securing your devices, our metal Jeep compatible cell phone mount platform is not going anywhere, even on really bumpy roads or off-roading your favorite trails. Your truck deserves this level of toughness and quality. *Patent Pending*.
Check Stock

Greeking Out (Destination Daddies)

  • Wagan True Rated Power: 2000W with Surge power 4000W.
  • Pure Sine Waves (PSW) - allows these electronics to run cooler (less cycling), cleaner, and with less noise. PSW is the output form that comes from the AC Wall outlet in your house and is the most clean..
  • Fast Charging - two 3-prong ground fault protected AC outlets (NEMA 5-15), 3 position power switch (On > Off > Remote), 2. 1A USB Power Port, Power And Fault Lights, Solid Mounting Feet.
  • Ground Fault Protected Outlets - the Negative (Black) Solid Mount Terminal, Positive (Red) Solid Mount Terminal, Twin Cooling Fans, Solid Mounting Feet, and a Grounding Terminal.
  • RoHS compliant, CE approved, and ETL certified to conform to UL and CSA Standards.
Check Stock

Beelta Tablet Wall Mount for 10.2 iPad 7th 8th 9th Generation Lockable Tiltable BSW102T

  • ➤ 【Build your own iPad wall mount display 】 This iPad wall mount has wide applications, great for any public setting like conference rooms, warehouse management system, library, gym, trade shows and commercial stores..
  • ➤ 【Solid secure & appealing 】 This tablet wall mount is theft proof and locked with the key. The bezel of the mount is ABS plastic, light weight and appealing. The bracket is made of steel, mounted to the wall with 4 screws for a long last & solid solution..
  • ➤ 【Tilt 30° up and down 】 The hinge between iPad mount and wall is adjustable, allowing you to find your ideal viewing angle. The distance from the device to the wall is around 2 inches..
  • ➤ 【Horizontal or vertical installation 】 Choose the installation orientation according to your application. Tilt the frame up before installing and removing the iPad to prevent it from slipping off..
  • ➤ 【Great cable management 】 The wire is hidden inside the iPad wall mount, no need to take the iPad out of the frame to charge it. The lightning splitter included protects the charging wire fro....
Check Stock

JDDWIN Switch OLED Wall Mount,Wall Mount for Switch/Switch OLED,All Metal Vertical Hanging On Wall.WHITE

  • 【Compatibility】Perfectly compatible with your switch OLED console.A perfect wall mount for your switch OLED Dock/console/Joy-con grip for an ultra-clean set up or display it in style..
  • 【Space Saving】 Compatible with switch and Switch OLED console and make them near or behind your wall mount TV..
  • 【Heat Radiation】Our custom design keeps vent on your Dock exposed and will prevent it from overheating..
  • 【Made of Solid Metal】This wall mount is made of solid metal sturdy and heavy duty design ensuring durability and longevity..
  • 【Easy to Install】Easy installation wall mount with decent instruction..
Check Stock

TV Wall Mount, Studless or Anchors Mount, Heavy Duty Aluminum Alloy TV Bracket Hanger for 32-75 inch All Brand Flat Screen TVs, Drywall No Stud, Easy Install with All Hardware Included

  • ✅【SOLID ALLOY STEEL CONSTRUCTION 】Unlike other brands of poor steel TV mount on the market, we make AENTGIU TV wall mount from heavy-duty Solid Alloy Steel for reliable strength, is rust-free, accommodates 32 to 75-inch TVs weighing up to 150lbs including Samsung, Sony, Panasonic, Toshiba, Sharp, LG, Philips, JVC, and more.
  • compatible with VESA mounting holes 200x100mm to 600x400mm. (The VESA mounting patterns are the distances (in mm) between the four screw holes on the back of the TV)..
  • ✅ 2 Ways to Install 【NO STUD MOUNT for DRYWALL & ANCHORS MOUNT FOR BRICK OR CONCRETE WALL 】 Wall studs NOT required for installation, avoid the hassle of finding studs hold up to 150 pounds in drywall, wood, brick or concrete walls..
  • ✅【MINIMAL WALL DAMAGE 】Built-in bubble level and all mounting hardware included for all brand tv easy installation. Installs in 10 minutes. Drywall mount installs with tiny picture hanging nails. Keep your expensive equipment safe and secure with this reliable solid aluminum alloy TV mount that’s 3 times strength tested to support up to 150 pounds.
  • ✅【Low profile】Extends only 0.9 inch clearance from the wall for no gap, offers a great space saving solution with a stylish and clean appearance..
Check Stock

Ntertainment House 2-pcs Solar Post Cap Lights with Pebbled Print Glass Frames and 2 Ultra Bright SMD LEDs w/Optional Wall Mount 6x6 5x5 or 4x4 Base adapters (White, 5x5)

  • Solar Light Post Cap 2 SMD Wall Mount or Post Mount. This Fine Solar Post Cap can be used for post or wall mount. It have dual function and it is using real pebbled printed glass. Operating Time: Up to 8 hours (depending on weather, regions and sunlight intensity available).
  • wall mount bracket mount is 3'x3" the arm is 7" long holding by 3 long screw and 3 drywall plastic insert..
  • 6x6 base adapters: Inside diameter of one side is 5.75" (good for wood/composite posts) and inside diameter of other side is 6 1/16" (good for PVC/Plastic/Vinyl posts) Solid/Hollow.
  • 5x5 base adapters: Inside diameter of one side is 4.75" (good for wood/composite posts) and inside diameter of other side is 5 1/16" (good for PVC/Plastic/Vinyl posts) Solid/Hollow.
  • 4x4 base adapters: Inside diameter of one side is 3.75" (good for wood/composite posts) and inside diameter of other side is 4 1/16" (good for PVC/Plastic/Vinyl posts) Solid/Hollow.
Check Stock

2Pack Camera Clamp Mount Monitor Mount Bracket Double Ballhead Ball Arm with Super Clamp Compatible with Ronin M Ronin MX Freefly MOVI

  • This is 2 Pack multi-function double ball head with bottom super clamp and 1/4" tripod threaded screw to mount Monitors and Led Lights to DSLR..
  • Comes with a double ball munt with 360 degree swivel Articulation for easy direction. Single locking knob for quick and safe locking.Standard 1/4"-20 tripod screw on top to mount video monitors and small led lights..
  • Comes with solid mini super clamp with Max open(approx) 2.16inches,It holds tight and can mount virtually everywhere you need like 15mm rods, hooks, shelves, plate glass,cross bars.With 1/4"-20 and 3/8"-16 thread for setting up other configurations..
  • Made of solid aircraft aluminum. Package includes 1x double ball head mount,1x mini super clamp..
  • Package includes 2 pack of Anwenk Camera Clamp Mount (1/4" Double Ball head + Mini Super Clamp).
Check Stock

PASOW 2.5'' 3.5'' to 5.25'' SSD HDD Mounting Bracket Internal Hard Disk Drive Bays Holder Adapter for PC

  • You can use it for 2 drives,2.5" SSD and 3.5" HDD.Allow to mount a 3.5 inch drive and a 2.5 inch drive (or a 8cm fan) to a 5.25 inch drive bay in your computer case at the same time..
  • Converts an available 5.25" HDD bay drive to accommodate 3.5" HDD or 2.5'' SSD (Solid State Drive)..
  • Compatible with any 2.5 or 3.5 inch IDE,SATA or SAS Hard Drive and Solid State Disk..
  • Mounting the 2.5'' drive firstly when you mount 3.5'' drive and 2.5'' drive at the same time,you can mount 8cm fan at the back if not mount 2.5'' hard disk..
  • Made of plastic body,quick and easy installation.
Check Stock

MYCAN Trailer Hitch Ball Mount Forged Solid Steel Fits 2 1/2' Receiver Hitch Class 5 Hitch Ball Mount Towing 2' Drop, 1/2' Rise 20,000 lbs 1-1/4' Hole Commercial Duty MCFT252

  • Heavy Duty Forged Steel: MYCAN trailer hitch ball mount is constructed from high-strength solid forged steel and this hitch ball mount is rated to tow up to 20,000 pounds gross trailer weight and 2,700 pounds tongue weight (limited to lowest-rated towing component).
  • 2 Inch Drop and 1/2 Inch Rise: MYCAN Towing ball mounts comes with a 2-1/2-inch x 2-1/2-inch shank to fit virtually any industry-standard 2-1/2-inch trailer hitch receiver. The tow ball mount also has a 4-inch drop and 2-1/2-inch rise to promote level towing.
  • 2 1/2 Receiver Hitch: Hitching up your trailer is easy with this 2 1/2 inch ball mount. MYCAN forged trailer hitch ball mount features a 1-1/4-inch hole to accept a trailer hitch ball with a 1-1/4-inch diameter shank.
  • Corrosion-Resistant: For long-lasting use, this trailer hitch ball mount 2 1/2 inch is with highly durable carbide black powder coat finish, solid trailer hitch ball mount easily resisting damage from rain, dirt, snow, road salt and other corrosive threats.
  • Easy to Install: To install this class 5 hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2 1/2 inch trialer hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin.
Check Stock

Fotasy Nikon F Mount Lens to Nikon Z Mount Adapter, Nikon FTZ Mount Adapter, Nikon F Z Adapter, Nikon Z Adapter F Mount, fits Nikon F Mount Lens & Nikon Z Mirrorless Camera Z5 Z50 Z6 Z7 Z6 II Z7 II

  • Solid Nikon F Z Mount Adapter / FTZ Adaptor / Nikon Z Mount Adapter allows Nikon f mount lens (non-ai, AI, AIS) to fit on Nikon Z Mount Mirrorless Camera Z5 Z50 Z6 Z7 Z6 II Z7 II.
  • There is no electrical contacts in the adapter ring. Exposure and focus has to be adjusted manually. Automatic diaphragm, auto-focusing, or any other functions will not operated with using this adapter..
  • Nikon Z6 FTZ Adapter, Nikon Z7 FTZ Adapter fits Nikon F Mount lens (non-ai, AI, AIS). does not work with Nikon G lens..
Check Stock