Reviews Soldering Heatsink

Easycargo 124pcs Heatsink Kit 9 Sizes Multicolor Aluminum Copper + 3M 8810 Thermal Conductive Adhesive Tape, Cooler Heat Sink Cooling VRM VRAM CPU GPU Small IC Laptop Raspberry Pi 4 SSD NVMe M.2 PS5

  • Universal Heatsink Assortment Box,124pcs Multicolor in 9 different size + Pre-applied 3M 8810 Thermal Conductive Adhesive Tape..
  • Variety Aluminum and Copper heat sinks for cooling raspberry pi 4, VRM VRAM RAM CPU GPU MOSFET Small IC Chips PC Components Laptop M2 M.2 SSD NVMe PS5.
  • Includes: 8pcs black anodized aluminum heatsink: 0.56 x 0.56 x 0.26 inch (14mm x 14mm x 7mm).
  • 8pcs green anodized aluminum heatsink: 0.56 x 0.56 x 0.30 inch (14mm x 14mm x 8mm).
  • 8pcs silvertone aluminum heatsink: 0.6 x 0.6 x 0.25 inch (15mm x 15mm x 6.5mm).
  • 8pcs silvertone aluminum heatsink: 0.56 x 0.56 x 0.21 inch (14mm x 14mm x 5.5mm) (L*W*H)..
  • Includes: 16pcs black anodized aluminum heatsink: 0.56 x 0.4 x 0.26 inch (14mm x 10mm x 7mm) (L*W*H).
  • 16pcs silvertone aluminum heatsink: 0.56 x 0.4 x 0.21 inch (14mm x 10mm x 5.5mm) (L*W*H)..
  • Includes: 20pcs black anodized aluminum small heatsink: 0.35 x 0.35 x 0.19 inch (9mm x 9mm x 5mm).
  • 20pcs silvertone aluminum small heatsink: 0.35 x 0.35 x 0.19 inch (9mm x 9mm x 5mm).
  • 20pcs low profile copper pad shim heat sink: 0.59 x 0.59 x 0.02 inch (15mm x 15mm x 0.5mm) (L*W*H)..
Check Stock

Pastall 100 PCS (8 Different Sizes) Heatsink Kit with Conductive Adhesive Tape, Aluminum Heat Sink Cooler and Copper Heatsink for Raspberry Pi A B B+ 2/3/4

  • ❤ The 100 PCS (8 Different Sizes) heatsink kit with conductive adhesive tape, Easy to use and could effectively provide good heat dissipation..
  • ❤ As a Raspberry Pi heat sink (using as raspberry pi 4 heatsink/raspberry pi 3B+ heatsink), it has good heat dissipation performance and compatible with most Raspberry Pi cases..
  • ❤ The heat sink is equipped with high-performance thermal conductive adhesive, high viscosity, durable and long lasting..
  • ❤ This small heatsink kit included : 80 pcs aluminum heatsink + 20 pcs copper heatsink( It Contains 8 different sizes of heat sink,Please check the specific size on the picture)..
  • ❤ the heatsinks also could be used for Cooling Development Board Laptop CPU GPU VGA RAM VRAM VRM IC Chips LED MOSFET Transistor SCR Southbridge Northbridge Voltage Regulator.It is an excellent heat sink for heat dissipation in electronic DIY,You will love it!.
Check Stock

Intel i3/i5/i7 LGA115x CPU Heatsink and Fan E97379-003

  • DESIGNED FOR THE PS5 CONSOLE: Engineered to fit perfectly and easily into the PS5 console's SSD expansion slot for a quick and easy install..
  • REVOLUTIONARY COOLING: Made from High-Quality CNC'd aluminum, the Sabrent Heatsink for the PS5 console was specifically designed to maximize cooling performance and simplify installation..
  • UPGRADE YOUR CONSOLE! Rather than creating a heatsink that would only trap the heat in the metal cover, we designed a heatsink that replaces the native PS5 consoles cover. This allows for better cooling using the native fan as well as being a larger heatsink..
  • INDUSTRIAL QUALITY: This SSD heatsink method also uses Sabrent's "Sandwich Design" which ensures even pressure throughout the SSD for efficient and consistent heat transfer unlike methods used by other brands..
  • CONVENIENCE: Comes with an installation guide as well as screws and thermal tape for easy convenient installation..
Check Stock

SABRENT M.2 NVMe Heatsink for The PS5 Console (SB-PSHS)

  • DESIGNED FOR THE PS5 CONSOLE: Engineered to fit perfectly and easily into the PS5 console's SSD expansion slot for a quick and easy install..
  • REVOLUTIONARY COOLING: Made from High-Quality CNC'd aluminum, the Sabrent Heatsink for the PS5 console was specifically designed to maximize cooling performance and simplify installation..
  • UPGRADE YOUR CONSOLE! Rather than creating a heatsink that would only trap the heat in the metal cover, we designed a heatsink that replaces the native PS5 consoles cover. This allows for better cooling using the native fan as well as being a larger heatsink..
  • INDUSTRIAL QUALITY: This SSD heatsink method also uses Sabrent's "Sandwich Design" which ensures even pressure throughout the SSD for efficient and consistent heat transfer unlike methods used by other brands..
  • CONVENIENCE: Comes with an installation guide as well as screws and thermal tape for easy convenient installation..
Check Stock

GLOTRENDS M.2 Heatsink and Desktop PC Installation Fit for 2280 M.2 PCIe 4.0/3.0 NVMe SSD

  • M.2 heatsink cooler fits for Desktop PC installation. 0.4inch/10mm high m.2 heatsink..
  • Fit for all kinds of M.2 2280 SSD, including M.2 PCIe 4.0 SSD, PCIe 3.0 SSD, and PS5 M.2 SSD, such as WD Black SN850, Sabrent Rocket 4 Plus, Sabrent....
  • Unique dual installation solution: Metal clips + rubber bands for M.2 SSD installation. No need to worry about rubber bands material aging or SSD long....
  • 10°C- 30°C cooling effect (Varies depending on the environment) to keep your M.2 SSD under good performance even full-load operation. M.2 heatsink....
  • A thermal pad is included. To conduct heat from M.2 SSD to M.2 heatsink, the thermal pad is put between M.2 SSD and M.2 Heatsink. It is a low....
Check Stock

EKWB EK-M.2 NVMe Heatsink- Black

  • Materials used: – Aluminium front cover – Aluminium backplate – Stainless steel clips.
  • Enclosed: – EK-M.2 NVMe Heatsink front cover – black – EK-M.2 NVMe Heatsink backplate – black – Mounting clips – Thermal pad 0.5mm – Thermal pad 1mm – Thermal pads.
  • PLEASE NOTE: The heatsink is compatible with all single sided type 2280 M.2 NVMe SSDs (22mm wide, 80mm long). The heatsink is compatible with M.2 (NGFF) connectors 4.2mm heigh.
  • PLEASE NOTE: Its mandatory to mount thermal pads on both sides of the M.2 NVMe SSD. The ASUS HYPER M.2 PCIe card just for showcase it is not included!.
Check Stock

Geekworm 12mm Aluminum Alloy Heatsink (C235) Support 30mm Cooling Fan Compatible with Raspberry Pi Compute Module 4 CM4 Motherboard

  • ✔Geekworm design 12mm aluminum alloy heatsink for Raspberry Pi Compute Module 4 CM4.
  • User manual, refer to Geekworm WiKi search C235..
  • ✔Heatsink dimensions: 54x39x12mm/2.12x1.53x0.47inch.
  • ✔Support install 30mm (3007 or 3010) cooling fan above the heatsink for better heat dissaption.
  • ✔With one piece thermal pad, need to cut proper thermal pad to attach on the CPU of Raspberry Pi Compute Module 4.
  • ✔The C235 heatsink reserve the space to connect the extermal antenna for CM4. ✔The inclcuded PM2.5x16mm screws length is just for install CM4 module and C235 heatsink, no support CM4 IO board..
Check Stock

Heatsink Heat Sink + External Cooling Fan Kit for Raspberry Pi Model B B+ B Plus 2 3 3+ Geekstory(2 Pack)

  • The heatsink and cooling fan work with Raspberry Pi Model B B+ 2 3. It also can be used for the newest Raspberry Pi 3 Model B+.
  • It can not work for Raspberry pi zero, because there is no pin header on zero.
  • Large heatsink size : 14mm * 14mm * 7mm, small heatsink sizel: 9mm * 9mm * 5mm.
  • You will receive 2pcs large heatsink + 2pcs small heatsink + 2pcs cooling fan.
  • This kit is used for Raspberry pi development board and other electronic chip auxiliary cooling .If you have any issue when using our product,or you need product use documentation， please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer..
Check Stock

Advancing Gene M.2 NVMe Heatsink for PS5 Console, Black

  • ✅[Customized for PS5 SSD Slot] - This M.2 SSD cover heatsink is specially designed for PS5 console's SSD expansion slot, unique slim tail design will not affect the installation of the PS5 plastic cover. It can perfectly replace the original PS5 SSD expansion slot cover..
  • ✅[Premium Material Used] - Made from expensive Aviation Grade Magnesium Aluminum Alloy, anodic oxidation, fine workmanship. It not only has high hardness and light weight, but also has better heat dissipation effect, which is completely different from those cheap PS5 heatsinks. In addition, it is also equipped with extended screw and corresponding screwdriver, stable installation, to ensure that it will not fall off..
  • ✅[Optimized Heat Dissipation Design] - Different from other closed designs, we adopted unique surface cooling slot + through-hole design to allow heat from the SSD card slot to dissipate out. With the help of PS5's built-in fan, air circulation can be accelerated to maximize heat dissipation affect..
  • ✅[Quick and Easy Installation] - Advancing Gene heatsink for the PS5 console compatible with all kinds of M.2 NVMe SSD and easy to install: >> 1. Use the screwdriver remove the original SSD cover plate of PS5.
  • >> 2. Use the extended screw enclosed to fix the new ....
Check Stock

GLOTRENDS M.2 Heatsink with M.2 Thermal Pad for 2280 M.2 PCIe 4.0/3.0 NVMe SSD (2 Packs)

  • 2 packs of M.2 heatsink fits for PS5/PC installation. 0.12inch/3mm high m.2 heatsink well fit for PS5 installation as well as PC M.2 Slot..
  • Fit for all kinds of M.2 2280 SSD, including M.2 PCIe 4.0 SSD, PCIe 3.0 SSD, and PS5 M.2 SSD, such as WD Black SN850, Sabrent Rocket 4 Plus, Sabrent Rocket 4, Samsung 980 Pro, Samsung 970 Pro, Silicon Power US70, and etc..
  • Unique dual installation solution: Metal clips + rubber bands for M.2 SSD installation. No need to worry about rubber bands material aging or SSD long time high-temperature operation..
  • 5°C- 20°C cooling effect (Varies depending on the environment) to keep your M.2 SSD under good performance even full-load operation. M.2 heatsink can extend the life of M.2 PCIe SSD..
  • A thermal pad is included. To conduct heat from M.2 SSD to M.2 heatsink, the thermal pad is put between M.2 SSD and M.2 Heatsink. It is a low viscosity, thermal conductivity, and insulation..
Check Stock