Reviews Solder For Keyboards

0.2ML Silver Conductive Glue Wire Electrically Paste Paint PCB Repair, 7 x 3 inches

  • With Silver Conductive Paste, repairing damaged PCBs (printed circuit boards) has never been easier! Used around the world by professionals and amateurs alike..
  • A special formula of highly conductive, silver micro-particles and adhesive paste.
  • Adheres easily to many substrates such as glass, plastic, and the solder mask of PCBs.
  • Dries in just one hour. If you want the paste to dry faster, blow it with hot air from hair dryer for 2-3 minutes..
  • Repair computers, keyboards, mice, remote controls, calculators, video game consoles, controllers, flash drives, and other electronics.
Check Stock

EPOMAKER Skyline Gasket-Mounted 75% Hot Swappable Wired Gaming Keyboard DIY Kit with RGB Backlight, Rotary Knob, Compatible with 3Pin 5Pin Gateron/Cherry/Kailh/Otemu Switch (Transparent)

  • ...les are drilled into the switch plate. Instead, the switch plate is wedged in between the case layers and PCB through the support of rubber strips, or gaskets. Compared to a top mount system, a gasket-mounted keyboard has a cleaner sound profile because the gaskets cushion the shock of each keypress. Gasket-mounted keyboards also give a softer typing experience, which helps avoid hand fatigue for those who type for long periods. On the other hand, top-mounted keyboards tend to be stiffer.
  • 【82 Keys 75% Compact Layout】EPOMAKER Skyline custom wired mechanical keyboard DIY kit is designed in a favored compact 75% layout by the community to maximize the function while not waste a minimum of space. This layout is widely used and loved by the community and Skyline will surely beyond your expectation with the hot swappable socket and programmable software, amazing RGB backlights.
  • 【Hot Swappable PCB, Compatible with 3Pin/5Pin Switch】EPOMAKER Skyline Kit is equipped with hot swappable PCB to ensure free replacement or change of switches. You don’t need to solder it. It is compatible with most 3 pin and 5 pin mechanical switches, such as Cherry, Gateron, Otemu, Kailh and other MX switches and its clones.
  • 【Amazing RGB Backlight&Music Rhythm Mode】RGB b....
Check Stock

EPOMAKER Next time Skyline Gasket-Mounted 75% Hot Swappable Wired Gaming Keyboard DIY Kit with RGB Backlight Rotary Knob Compatible with 3Pin 5Pin Gateron/Cherry/Kailh/Otemu Switch White

  • ...les are drilled into the switch plate. Instead, the switch plate is wedged in between the case layers and PCB through the support of rubber strips, or gaskets. Compared to a top mount system, a gasket-mounted keyboard has a cleaner sound profile because the gaskets cushion the shock of each keypress. Gasket-mounted keyboards also give a softer typing experience, which helps avoid hand fatigue for those who type for long periods. On the other hand, top-mounted keyboards tend to be stiffer.
  • 【82 Keys 75% Compact Layout】EPOMAKER Skyline custom wired mechanical keyboard DIY kit is designed in a favored compact 75% layout by the community to maximize the function while not waste a minimum of space. This layout is widely used and loved by the community and Skyline will surely beyond your expectation with the hot swappable socket, amazing RGB backlights.
  • 【Hot Swappable PCB, Compatible with 3Pin/5Pin Switch】EPOMAKER Skyline Kit is equipped with hot swappable PCB to ensure free replacement or change of switches. You don’t need to solder it. It is compatible with most 3 pin and 5 pin mechanical switches, such as Cherry, Gateron, Otemu, Kailh and other MX switches and its clones.
  • 【Amazing RGB Backlight&Music Rhythm Mode】RGB backlight is always con....
Check Stock

Keychron K6 65% Compact Wireless Mechanical Keyboard for Mac, Hot-swappable White Backlight, Bluetooth, Multitasking, Type-C Wired Gaming Keyboard for Windows with Gateron G Pro Brown Switch

  • ...actile responsiveness on the Brown switch with a durable 50 million keystroke lifespan. You can alter every switch to most of the other MX style mechanical switches without the need to solder..
  • The K6 can last up to 200 hours (with backlight off) with a 4000 mAh big battery, which is one of the biggest in mechanical keyboards. Inclined bottom frame and 2 level adjustable feet provides a great ergonomic support for long lasting typing comfort. N-key rollover (NKRO) on wired mode or 6KRO on wireless mode..
Check Stock

EPOMAKER Next Time Skyline 20% Hot Swappable Numpad 2.4Ghz/Bluetooth/USB-C Wired Numeric Keypad DIY Kit, 2000mAh Battery, Compatible with 3/5Pin Gateron/Cherry/Kailh Switch (Milky White)

  • 【20% 19 Keys Mini Numpad with Allumen Plate】For keyboard community, trying different layouts of keyboards are so much fun and sometimes you may need a numpad if your keyboard does not offer a numerical pad. EPOMAKER Next Time Numpad comes in handy when you want to insert numbers. Included software enables further macro recording and RGB settings. A numpad, small body but big function.
  • 【Triple Modes-2.4Ghz Wireless/bluetooth/USB-C Wired】Designed in triple modes makes this mini numpad more appealing. Fast 2.4Ghz and wireless Bluetooth connection make connection like a piece of cake, no more bulky cables while we also included a type-C cable as back up when you run out of battery. Triple connectivity, triple possibility.
  • 【EVA Bottom Cotton&Factory-lubed Stabilizer】For ultimate smooth typing experience, this numpad kit is equipped with a EVA bottom cotton, along with a mute cotton layer to maximum decrease hollow sound. It also come with factory-lubed stabilizers and supreme Allumen plate for durability.
  • 【Hot Swappable PCB, Compatible with 3Pin/5Pin Switch】EPOMAKER Skyline Kit is equipped with hot swappable PCB to ensure free replacement or change of switches. You don’t need to solder it. It is compatible with most 3 pin and 5 pin mechanic....
Check Stock

MOGAOPI Solder Wick and Desoldering Pump, Spare nozzle, Solder Sucker & Desoldering Wick,1pcs Solder Braid Desoldering Vacuum Pump Solder Remover Tool

  • ( 4-in-1 Solder Removal Tool ) 1pcs desoldering vacuum pumps ,1pcs Spare nozzle ,1pcs solder wicks and 1pcs High Temperature Resistance Silicone Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts..
  • ( One-handed solder sucker with powerful suction ) you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
  • ( Desoldering Wick with copper braid ) 1pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
  • ( ABS body with non-slip sponge and Nylon nozzle desoldering pump ) The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat....
Check Stock

Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover

  • 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
  • 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
  • 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time..
  • 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while....
Check Stock

Teenitor Solder Sucker Desoldering Vacuum Pump Solder Removal Tool 3pcs/Pack Desoldering Pump Soldering Sucker Tool

  • UNPARALLELED SUCTION POWER - Good little solder sucker, have a good bit of suction,you can just hang onto it and use your thumb to reset and suck. The ideal tool for intricate soldering jobs..
  • ONE-HANDED OPERATION - Simple design allows easy one-handed use,lightweight and compact,suck the solder away easily. Say goodbye to tedious two-handed solder extraction and .quickly and easily removing solder.
  • DURABILITY AND LONGEVITY - Very sturdy,will worke good to remove existing solder from a circuit board. Made with high-quality materials and designed to withstand heavy usage, our Solder Sucker ensures longevity and performance, saving you time and money in the long run..
  • ERGONOMIC DESIGN - Heated up the solder pushed the button and bam,all solder sucked up,super easy to use for desoldering. The comfortable, non-slip handle and lightweight body make our Solder Sucker easy to handle, ensuring maximum control and precision..
  • VERSATILE APPLICATIONS - A must have excellent solder sucker which fits nicely in your tool box. Our solder sucker desoldering pump is not just limited to soldering. It can also be used for desoldering, removing hair, lint, and dust, and even for cleaning delicate electronics. The ultimate multi-purpose tool for any DIY enthusiast..
Check Stock

Dremake 3 Foot Professional Instrument Cable, Guitar Cable for Speaker Bass Keyboard 1/4' (6.3mm) Straight to Right Angle Inch Cable Black/Red Tweed

  • Oxygen-Free-Copper AWG24 conductor, for enhanced enhanced signal clarity.
  • Straight to Right Angle 1/4" zinc alloy metal connectors with iron plated wire clamp to protect the solder points.
  • High coverage of OFC Braided provide for professional musicians, brings this cable a strong,durable and pure tone.
  • Braided Cloth Jacket, protects your guitar cables against cuts and breaks caused by twisting and kinking.
  • Suitable for connecting your acoustic guitar, bass, keyboards,electric mandolin, pro audio to a Amp or PA certified Straight to right angel patch cable, guitar instrument cable, 1/4 guitar amp, quarter inch cable, 1/4 Right Angle to Straight, 1/4 guitar patch cable, 1/4 to 1/4 cable 10 ft, cable 1/4" (6.3mm) Straight to Right Angle, guitar cable for acoustic guitar,right angle 1/4 plug,guitar cable for bass....
Check Stock

Mogaopi Desoldering Wick, Desoldering Pump, Solder Sucker, Solder Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length) Solder Wire, Replacement Tip, Desoldering Vacuum Pump Solder Removal Tool

  • 【6-in-1 Solder Removal Tool】: 2 pcs Desoldering Wire, 1pcs Solder Wire, 1pcs Desoldering Pump, 1pcs Replacement Tip, 1pcs Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts..
  • Desoldering Wick with Copper Braid - Solder wire, replacement tip, 2pcs solder braid (3.5mm/2.0mm Width, 1.5m Length). 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder..
  • 【One-handed solder sucker with powerful suction】: Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
  • ABS Body with Non-slip Sponge and Nylon Nozzle Solder Wick - The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold. Right or Left handed design allows easy one-handed use..
Check Stock