Reviews Solder Fluxes

Hakko CHP TR-30-58 Medium Soft Wire Cutter, Chamfered Cut, 3.0mm Hardened Carbon Steel Construction, HRC 58, 21-Degree Angled Jaw, 8mm Jaw Length, 14 Gauge Max Cutting Capacity

  • Product 1: Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge (1.3mm) copper and soft wire.
  • Product 1: 2.5mm heat-treated carbon steel construction provides durability and long life.
  • Product 1: Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue.
  • Product 2: Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes.
  • Product 2: Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board.
  • Product 2: 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder.
  • Product 2: Available with standard or anti-static bobbins.
Check Stock

Acid Brush, Horse Hair, 1/2 in. 6 in. OAL, One Gross (144 brushes)

  • These brushes have a wide array of uses including application of glue, stains, solder fluxes, paints, and paint remover..
  • These brushes are Made in the United States of America..
  • Unlimited number of industrial, scientific, automotive, hobby and craft uses and are simply great to have in the garage, shop, or home..
  • Great for cleaning and dusting delicate items or hard to reach areas like keyboards and phones..
  • Tin plated handles with black horsehair bristles. 6" long brush length, 1/2" bristle width, 3/4" trim (bristle length)..
Check Stock

Aquiflux Self Pickling Flux for Precious Metals Gold Silver Jewelry and Hard Soldering 8 Oz Half Pint

  • Includes: one half-pint (8 fluid ounces within a spray bottle).
  • Yellow-green and self-pickling, it is the best in water-based fluxes.
  • Use this hard flux on Gold, Silver, Platinum, and other metals with high melting point.
  • The benefit of liquid flux is that its transparency will let you see the solder joint more clearly when soldering and the liquid flows better in....
Check Stock

Litorange 2 PCS Lead Free Brass Construction 1/2' by 1/2-Inch Female Threaded PEX Pipe Barb FNPT Swivel Elbow Plumbing Connection Crimp Fittings

  • ★ Lead Free Compliant Brass. Easily installed without flame, flux, or solder and requires no bonding agents, glue, or solvents..
  • No Flames, Glue, Fluxes, or Solvents Needed. Approved to be used underground and behind walls without access panels.
  • etc. Certified for use in potable water applications..
  • ★ Resists corrosion and mineral buildup, rust, and freeze damage. Suitable for new or retrofit construction and for hot or cold water distribution..
  • ★ Package include: 2 PCS 1/2" PEX elbow fitting..
Check Stock

Weller WSA350 120v Bench Top Smoke Absorber

  • Great for workspaces using more active fluxes.
  • Removes flux fumes from soldering workbench.
  • Fumes are absorbed by the replaceable carbon-activated filter.
  • Includes one replacement filter (WSA350F), ESD safe.
  • Fan is quiet and will not add significant noise to the workspace.
Check Stock

LA-CO 22302 High Heat Resistance Silver Brazing Flux Paste, 1000 to 1700 Degree F Temperature, 2 oz

Check Stock

L & R #566 Ultrasonic Non-Ammoniated Watch Cleaning Solution - 1 Gallon Jug

  • Electronics and fine optics cleaner, mildly alkaline. Rinses residue free.
  • Parts to be cleaned: electronics, printed circuit boards, electromechanical components, glass, ceramics, plastic parts and optics.
  • Contaminants to remove: polishing suspensions, grease, oil, fluxes, spilled liquids, water damage, fingerprints, dust.
  • Dilute with water to 3-10 percent before use.
Check Stock

MG Chemicals 4140A Flux Remover for PC Boards, 1 Quart Bottle

  • Use when a general-purpose zero residue flux remover is required.
  • Removes rosin, non-rosin, and no clean fluxes as well as ionic and non-ionic residues..
  • Suitable for use in food facilities as a Non-Food Chemical Canadian and NFS recognition letters available on request.
Check Stock

MOGAOPI Solder Wick and Desoldering Pump, Spare nozzle, Solder Sucker & Desoldering Wick,1pcs Solder Braid Desoldering Vacuum Pump Solder Remover Tool

  • ( 4-in-1 Solder Removal Tool ) 1pcs desoldering vacuum pumps ,1pcs Spare nozzle ,1pcs solder wicks and 1pcs High Temperature Resistance Silicone Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts..
  • ( One-handed solder sucker with powerful suction ) you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
  • ( Desoldering Wick with copper braid ) 1pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
  • ( ABS body with non-slip sponge and Nylon nozzle desoldering pump ) The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat....
Check Stock

Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover

  • 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
  • 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
  • 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time..
  • 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while....
Check Stock