Reviews Soft Seated Butterfly Valve

DC 24V 1.5\/Φ38 Port Motorized Butterfly Valve, 304 Stainless Steel Tri Clamp GDAE10 for Food, Pharmaceutical, Beverage, Cosmetics, Sanitary 8W

  • 【FOOD-GRADE 304 STAINLESS STEEL】 - The pneumatic butterfly valve comprises 304 stainless steel material, no odor, high strength, and good corrosion resistance. They are specially designed for long service life. There is a silicone ring inside to ensure the tightness so that the liquid is not easy to leak..
  • 【HASSLE-FREE OPERATION】 - Convenient operation allows you rapid opening and closing, only to rotate 90° from fully open to fully closed. Control mode: single-acting, automatic return, You can perform local control and remote control, saving human resources and time to a large extent..
  • 【ACCURATE PRODUCT PARAMETER】 - The outer diameter of the sanitary pneumatic valve is 2 in / 51 mm, the size of the ferrule is 2.5 in / 64 mm. Our butterfly valve adopts a disc-shaped butterfly plate, which can better control the flow of liquid..
  • 【EXCELLENT & STABLE PERFORMANCE】 - Applicable temperature: ≤176 °F.
  • Environment temperature: 14 °F to 176 °F.
  • Sterilization temperature can reach to 392 °F. Air supply pressure: 5bar-8bar. Maximum pressure 1.6Mp. Our pneumatic butterfly valve is more adaptable than other models on the market..
  • 【APPLICABLE MEDIUM】 - Our tri-clamp butterfly valve is simple in structure, compact in body, light in weight, an....
Check Stock

Wilkins 115-975XL2 1.5-Inch Lead Free Reduced Pressure Backflow Preventer

  • Reduced pressure principle backflow preventer consisting of a pressure differential relief valve located between twoindependently operated spring-loaded center guided check valves, “Y” pattern body.
  • Complete with two full port resilient seated ball valves for shut-off and four resilient seated ball valve test cocks.
  • Pre-plumbed backflow station. Assembly can be of the reduced pressure principle or of the double check type.
Check Stock

RP22734 Replacement Bonnet Nut Compatible with Delta R10000 Shower Valve

  • Compatible with Delta R10000 series shower valve.
  • Good build quality and come with solid, clean threads.
  • Must use a wire brush to clean-up the threads on the valve body & wipe off any grit before install bonnet nut. If clean, nut should turn easily and snug up without excessive force.
  • Recommend to replace bonnet when replacing cartridge so that you can assure seals are properly seated/compressed in the valve body.
Check Stock

RP64851 Replacement Bonnet Nut Compatible with Delta R11000 Shower Diverter Valve

  • Compatible with Delta R11000 shower diverter valve.
  • Good build quality and come with solid, clean threads.
  • Must use a wire brush to clean-up the threads on the valve body & wipe off any grit before install bonnet nut. If clean, nut should turn easily and snug up without excessive force.
  • Recommend to replace bonnet when replacing cartridge so that you can assure seals are properly seated/compressed in the valve body.
Check Stock

DERNORD Butterfly Valve with Trigger Handle Stainless Steel 304 Tri Clamp Clover (1.5 Inch Tri Clamp Butterfly Valve)

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • The Trigger style handle butterfly valve - 13 Positions.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
  • The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.
Check Stock

DERNORD Butterfly Valve with Blue Trigger Handle Stainless Steel 304 Tri Clamp Clover (1.5 inch Tri Clamp Butterfly Valve)

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • DERNORD Trigger style handle butterfly valve - 13 Positions.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
  • The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.
Check Stock

DERNORD 1.5 Inch Tri Clamp Clover Butterfly Valve with Trigger Handle Sanitary Fitting Stainless Steel 304 2 Pack 1.5 Inch Trigger Butterfly Valve

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • The Trigger style handle butterfly valve - 13 Positions.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
  • The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.
Check Stock

SPELAB Electric Exhaust Cutout Valve 3.0 Inch 76mm Catback Single Y Pipe with One Controller Remote Kit…

  • .... The faster the exhaust could be pushed out of the engine, the faster the combustion process could start over which give more horsepower. Aggressive deep sound while ensures smooth exhaust gas flow. SPELAB Butt Joint Exhaust Band Clamp is recommended for installation..
  • Cutout Valve: High-quality chrome-plated steel butterfly plate and valve pipe wall thickening process. You can turn on and off from the inside of the car by remote control. Turn off the switch, keep your original, peaceful exhaust system for comfortable. Turn on the switch, you can get aggressive deep sound. The opening angle of the cutout valve can be freely controlled..
  • Working Environment: Working Voltage: 12V. Electric Exhaust Cutout Working Temperature: 0℃-150℃. If below -5℃, the oil in the motor will be frozen and causing the butterfly valve to be stuck. Electric Exhaust Cutout is not recommended to start work in heavy rain or extremely cold weather, the valve motor is NOT WATERPROOF..
  • SPELAB warrants the Electric Exhaust Cutout Valve Kit for 12 months warranty for quick-wear part. Include (motor, remote control, control box). We value your shopping experience and strive to offer a high-quality product and service. And if you have any other problem, contacting us and we will ....
Check Stock

The Catalyst Fermentation System - 6.5 Gallon Plastic Conical Fermenter

  • 6.5 Gallon Conical Fermenter that separates sediment, eliminates transfers and allows you to bottle straight from your fermenter..
  • The Catalyst’s tank is made from Tritan, a food-safe, BPA-free polymer. This revolutionary material retains the same clarity and smoothness of glass, but is resistant to shattering..
  • 3” Trub Trap Butterfly Valve – the largest in the industry- is designed to work with any large-mouthed mason jar, which makes catching and storing viable yeasts or separating sediment super simple..
  • Includes: 6.5 Gallon Tank with Lid, Stand (Base, 2 Legs, 2 Support Beams, 8 Screws), 3” Proprietary Butterfly Valve, Bottling Attachment, Transfer Tubing, Tubing Clamp, Rubber Stopper, 16 Oz. Wide Mouth Mason Jar, Allen Wrench.
  • Total Height (does not include airlock): 26.25" Maximum Width: 17".
Check Stock

Large, Multicolor Butterfly Balloons Foil - Pack of 6 | Big 4D Round Sphere Butterfly Birthday Balloons for Butterfly Birthday Decorations | Mylar Butterfly Balloon for Butterfly Party Decorations

  • PACK OF 6 | CREATE ENCHANTED COLORFUL BUTTERFLY THEME PARTY : Create a dreamy and fairy tale theme butterfly birthday decorations for your princess with these beautiful butterfly mylar balloons, Pack Of 6 with mainly designed around butterfly shaped and realistic details that will not only light up your theme party, also can be regarded as photography background and props for you to take beautiful selfies with your family and friends, make your party attractive with this butterfly balloon..
  • LARGE SIZE : 39 INCH | ATTRACTIVE BUTTERFLY BALLOONS WITH 4D FOIL BALLOONS : These gold foil butterfly balloons are large size of 39 Inch and 4D butterfly balloons - 22 Inch, pack of 2, Multicolor Butterfly Balloons - 39 Inch, Pack of 2 and have the shape of flying butterflies, symbolizing happiness and a new life, add fantasy and blessing to your princess fairy tale theme party, girl's birthday party and baby shower with colorful butterfly party decorations..
  • EASY TO USE | ACHIEVE MAXIMUM IMPACT : The globos de mariposas is pretty and easy to use just slowly fill the nozzle with air, when the large multi colored butterfly balloons is nearly 90% full, reduce the amount of ai....
Check Stock