Reviews Socket Backing

Olsa Tools Portable Socket Organizer Tray | Black Rails with Green Clips | Holds 80 Sockets | Professional Quality Socket Holder

  • ...et tray is so easy to use that you'll get your messy sockets organized in minutes while saving space in your toolbox. Simply unbox it, start clipping your sockets on, and grab the handle so that you can take your socket tray anywhere..
  • ★DURABLE DESIGN FOR A LIFETIME OF USE - Engineered with a high-grade steel backing and durable ABS socket clips, you can have 100% confidence that your sockets we'll be held firmly and securely. No doubt that this tray for sockets will last you for years on end..
  • ★ OLSA TOOLS TRUST - We are firmly committed to quality and giving the best experience to our valuable customers, all Olsa Tools socket organizers have a limited lifetime warranty. Buy with ease, and start using your new Socket Organizer Tray With Handle 100% risk-free..
Check Stock

Pops Sticky Adhesive Replacement for Car Mount, Volport 6 Pack 3M Dots VHB Sticker Pads Double Sided Tape for Socket Base and Magnetic Dashboard Cell Phone Holder with 2 Pack Round Metal Plate Discs

  • ...mth summer in florida. With this backup stickies adhesion replacement parts, you can replace and reattach phone socket wall mount and magnetic vehicle/truck/uber mount..
  • HOW TO USE 3M VHB ADHESIVE PAD: 1. Remove the used adhesive and clean up the mounting surface with alcohol pad if you have.
  • 2. Peel off the yellow backing film, stick adhesive to the back of mount and press firmly for 3 to 5 minutes for better connecting to the car mount base.
  • 3. Peel off the red backing film, stick on the flat and clean surface you want, then wait 24 HOURS to use after stuck, that’s it..
  • TIPS for USING 3M STICKY ADHESIVE: 1.If the red backing film hard to peel off and the black gel come up with, please repeat this act: peel-if come up-press red film back-peel again. 2.Do not stick adhesive on rugged, texture silicone surface, it may not stick well, clean flat and hard surface will be better. 3. Last but the most important point, please WAIT 24 HOURS after stuck..
  • 2PCS EXTRA METAL PLATES: Extras tiny metal discs can be use inside of phone socket cap to work with magnetic car phone mount, also can be pasted on cell phone or mobile phone case to works with magnetic car holder. Note: 1. Please stick metal plates outside of phone case if your phone needs wireless c....
Check Stock

MUNTE - SS304 Stainless Steel Female Threaded 3 Way Tee T Pipe Fitting 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" BSP Threaded (1")

  • Pipe Fittings and Tools include: Pipe fittings,copper pipe fittings, black iron pipe fittings, water pipe fittings, stainless steel pipe fittings, cpvc pipe fittings, iron pipe fittings, ABS pipe fittings, RV pipe fittings, Pipe fitting tools, PVC pipe fittings, PE pipe fittings..
  • Metal pipe fittings, Stainless steel pipe fittings, Socket, Female socket, Male socket, Wye, Tee 90, Elbow 90, Elbow 45, Reduced valve, Female elbow 90, Male elbow 90, Reduced tee, Reduced bush, cleanout, End Cap, PVC solvent cement, Clamp saddled, Flange, Steel backing ring, Adaptor, P trap with cleanout plug, Gasket, Valve.
  • Products are well manufactured, durable and have a long life, easy to disassemble and move during use..
  • Excellent quality, fast delivery, good after-sales. We promise to do everything in our power for you to be 100% satisfied.
Check Stock

Metal Plate for Phone Magnet, 8 Pack Replacement Magnet Disc Magic Mount Plate with Adhesive Backing for Socket Grips & Magnetic Car Holder Cradle Stand(Dashboard/Vent/CD Slot/Windshield) - Round

  • ...unts and socket grips. Rose gold thin metal phone plates are pretty accurate size for collapsible sockt, to hidden inside openable socket top whose cap can take apart/assemble easily. Bigger black mount metal plate can attach perfectly on the regular flat swappable expanding socket's pattern surface..
  • 【3M Adhesive Backing】 Metal disc with premium strong stickiness double-sided 3M adhesive backer, so self adhesive suit all magnetic mobile phone magicmount. Please place 3M metal plate sheet on the phone away from wireless charger sensor. Or apply mount metal plate to phone case, and remove case while charging. Magnet mettallic disc won't fall of on rugged and bumpy road once glued..
  • 【Smooth Edge & Protactive Films Provided】 Thanks to unique polishing process, polished edge of phone magnet plate is smooth and anti-scratch. You won't get you fingers scratched like other brands. Come with additional clear films. Stick films then attach the metal plate, so it is non-scratch for your phone to remove the spare metallic disk or sticky residue left..
  • 【No Risk Purchase】 6 x 1.18 inch rose gold magic plate, 2 x 1.57 inch black magicplate, 2 x protective clear films. We provide 12-month warranty and 30 days money-back guarantee. Any dissatisfaction with ....
Check Stock

WARN 102642 Stealth Series Winch Cover, Fits: VR8, VR10, VR12

  • Built tough with marine-grade vinyl, premium zippers, straps, and fabrics.
  • Weather resistant, UV-stable covers help protect the winch from the elements.
  • Front flap opens for access to the winch drum.
  • Zipper provides access to clutch handle and remote socket.
Check Stock

7443 LED Bulbs for Back Up Reverse Lights, CANBUS Error Free, 20W 4000Lumens, CSP 6-SMD Upgraded 6500K High Brightness 7440 7441 7444 Bulbs for Reverse and Brake Packing Lights （Pack of 2）

  • ...uilt-in high power Hyper Bright 20W X2 CSP Chips per bulbs, 6500K extremely bright white light, DC9V-32V Voltage, 3000LM high brightness per bulb,over 50,000 hours long lifespan, bright lights output maximize illumination and low power consumption, brings you a bright and comfortable light reversing experience when backing up at night or wicked weather, super bright like headlights in car reverse..
  • ★7443 LED Bulbs Widespread Application: The backup reverse light, compatible with multiple bulb size socket:7440, 7440LL, 7443, 7443LL, 7443-SCK, 7441, 7444NA, 7444NAK, 7440A, 7440NA, 7440NAK and etc. Easy plug and play to install within 20 minutes..
  • ★7443 LED Bulbs with CAN-BUS Error Free: Upgraded intelligent IC driver and non-polarity drive, to reduce the heat on IC driver and make it safer and long life span.and 20w high output makes the 3157 led reverse light bulbs compatible with 99% of vehicles, no radio interference..
  • ★7443 LED Bulbs with 360-Degree Lighting of View ＆ Longer Lasting: Each 7443 bulb adopted 1860 high-brightness chip, Non-polarity and 360 degree full angle illumination. Anti-Aging high quality silicon rubber socket rings, 1:1 as original socket on car, plug& play, give your car a refreshed new look and 360 degree lighting ensure....
Check Stock

Aspen Creative 32115-2 Lamp Shade (Colors May Vary), Off White

  • 1 Pack transitional UNO hardback empire replacement lamp shade.
  • petal paper in off white | 5" Top x 9" bottom x 7" slant height.
  • UNO lampshades fit only Phenolic threaded sockets that measure 1 3/8” wide (socket rings not included).
  • Applications – For Table Lamps, Accent lamps, Vintage Lamps, Candle Stick lamps and Kid’s Room Lamps.
  • Our hardback shades use Virgin Styrene backing board to produce a warm, natural & smooth light – more appealing than shades made with recycled Styrene board that can crack & yellow over time..
Check Stock

WARN 102641 Stealth Series Winch Cover Fits: M8, XD9, 9.5xp, VR8000, VR10000, VR12000

  • Fits WARN M8, XD9, 9.5XP, VR8000, VR10000, VR12000 winches.
  • Built tough with marine-grade vinyl, premium zippers, straps, and fabrics.
  • Weather resistant, UV-stable covers help protect the winch from the elements.
  • Front flap opens for access to the winch drum.
  • Zipper provides access to clutch handle and remote socket.
Check Stock

D-Lumina 7440 7443 LED Backup Reverse Light Bulbs, 5600 Lumens 21W 2-SMD CSP Chips T20 7441 W21W LED Bulbs For Car Truck Reverse Back Up Light, Canbus Error Free, Plug ＆ Play, 6000K White (Pack of 2)

  • ...er Hyper Bright 15W X2 CSP Chips per bulbs, 6000K extremely bright white light, 9-30V Voltage, 2800LM high brightness per bulb, 21W power output, over 50,000 hours long lifespan, bright lights output maximize illumination and low power consumption, brings you a bright and comfortable light reversing experience when backing up at night or wicked weather, super bright like headlights in car reverse..
  • 【360-degree Field of View ＆ Longer Lasting】: Each 7440/7443 bulb powered by 2 pieces of high brightness CSP chips, Non-polarity and 360 degree full angle illumination. Powerful lighting 4X brighter than stock lights, used for Car Truck Backup Reverse Light for customers who are looking for super bright backing up led bulbs, give your car a refreshed new look and 360 degree lighting ensures optimal visibility. IP65 Grade Waterproof LED bulbs with miniature sealed waterproof OEM Plug..
  • 【High Efficient Heat Dissipation】: The LED bulbs body make with billet CNC'd with anodized finish, aviation aluminum heat dissipation. The light choose bronze PCB board that has more efficiency to transmit the heat to base that made by aviation aluminum, for better heat dissipation and longer lifespan..
  • 【Package Including】: 2 pieces of 7440/7443 LED Backup Reverse l....
Check Stock

SHALL 3/8 Inch Magnetic Socket Organizer Set, 2-Piece SAE & Metric Socket Holders, Socket Tool Tray Storage Holds 56 Standard Sockets for Toolbox, Tool Carts, Drawers (Sockets Not Included)

  • Large Capacity: The magnetic socket organizer set includes 56 trays for 3/8 inch drive SAE & Metric standard sockets, making it ideal for those who need to organize many sockets.
  • 3/8” Drive Trays: Holds up to total 56pcs standard and deep sockets. SAE size from 1/4” to 1”, Metric size from 6 to 20mm.
  • Powerful Magnetic Base：The sturdy strong ferrite magnet base is capable to securely hold all your sockets in place to any ferromagnetic surface, whether upside down or upright. It can withstand high temp up to 158℉ and low temp down to -22℉. No effect to magnetism and base within this range.
  • No Scratches to Tools: The rubberized backing of socket holders covered with transparent film makes sure there would not be any scratch on the steel surface when you mount it on.
  • Reliable Quality: Made of high-quality material, the magnetic sockets organizers have passed the 2.0m anti-drop test.
Check Stock