Reviews Smraza Raspberry Pi Camera

Arducam 16MP Autofocus Quad-Camera Kit for Raspberry Pi, 16MP IMX519 Autofocus Synchronized Raspberry Pi Camera, Compatible with Nvidia Jetson Nano/Xavier NX

  • Designed for Raspberry Pi Camera: This Quad- Camera kit allows you to connect four 16MP IMX519 raspberry pi cameras to a single standard pi board and capture images or video at the same time..
  • Four in One: Combine four cameras into one frame, each with a resolution of 1/4.
  • the maximum output you can get: 4656 x 3496 for still images and 1920x1080 for video. Please note the frame rate for video and still images will drop to half the frame rate you would normally get with a single camera..
  • Wide compatibility: It is compatible with the latest Raspberry Pi camera software (libcamera) and uses the official Pi camera tuning algorithm. It also supports multi-platform multi-camera solutions such as Raspberry Pi, Jetson Nano, Xavier NX and many more. And this Camarray HAT is also compatible with Raspberry Pi 3 and Raspberry Pi (V1/V2/HQ) cameras..
  • Applications: Multiple camera processing technologies have enabled VR (Virtual Reality), AR(Augmented Reality), and other applications like SLAM (Simultaneous Localization and Mapping). Synchronized video streams with Raspberry Pi could be used for many use-cases (e.g., stitching, 3D sensing, tracking, …) before investing in an expensive video multiplexer hardware..
  • Please note: The cameras in the set are specifi....
Check Stock

Arducam Raspberry Pi Noir Camera Module, 8MP IMX219 RPi-CAM-V2 Night Vision for Raspberry Pi 4B, 3B+, 3B, 2B, Pi Zero & W

  • Raspberry Pi Noir Camera: This 8MP HD camera module is designed for Raspberry Pi with IMX219 8MP pixel sensor with a fixed focus lens. The difference from the regular V2 is that it does not have an IR filter..
  • 8MP More than HD: Supports 3280 × 2464 pixel still images, as well as 1080p30, 720p60, and VGA90 video modes, and still captures. EFL: 2.5mm.
  • Wide Compatibility: The PiNoir camera is compatible with all Raspberry Pi series boards, which can be easily used with a simple configuration. Please note: This camera module is only supported with the latest Raspberry Pi OS Bullseye (released on January 18, 2022) and libcamera, not with the previous Raspberry Pi OS (Legacy)..
  • Especially for Night vision: The NoIR camera does not have an infrared (NoIR) filter on the lens, making it ideal for infrared photography and photography in low-light (twilight) environments..
  • Easy to Setup: The package comes with a 15cm and 50cm 15pin FPC cable for Pi 1-4B, and a 15cm 15-22pin FPC cable for Raspberry Pi Zero and Zero 2W. Simply connect the Raspberry Pi board and camera with the FPC cable and you can easily use this 8MP high-quality camera..
Check Stock

Arducam Raspberry Pi HQ Camera for Raspberry Pi, 12.3MP IMX477 High Sensitivity CMOS with C-CS Adapter and Tripod Mount for Raspberry Pi 4 Model B, Pi 3/3B+, and Pi Zero 2W

  • High Quality Camera: Compared with Raspberry Pi Camera Module V2, this camera module offers higher resolution, up to 12.3MP. Also adopting 12.3MP IMX477 sensor for shape image, resolution 4056*3040 pixels, frame rate 30 fps@1080p, 60fps@720p, VGA90 video modes, IR Sensitivity..
  • Wide Compatibility: The IMX477 camera module is not only compatible with all models of Raspberry Pi 1, 2, 3 and 4, but also with Raspberry Pi Zero and Zero 2W, which can be easily used with a simple configuration. Note: This camera module supports the latest Raspberry Pi OS Bullseye (released on Jan 28th, 2022) and libcamera apps, not for the previous Raspberry Pi OS (Legacy) users.).
  • Easy to Setup: Only a driver away from Plug-and-Play, just use the 15-22pin FPC Cable included in the package to connect the Raspberry Pi 4B/3B and camera. If you connect with the Raspberry Pi Zero and Zero W2, the 22-22pin FPC cable is needed..
  • Package included: Come with a C-CS adapter that supports the use of C-mount and CS-mount lenses. It also includes a tripod adapter that is compatible with any tripod with standard 1/4"-20 mounting screws, this allows the camera to be secured anywhere you want..
  • Application: This Raspberry Pi HQ camera can be used to monitor 3D printer, and many other vis....
Check Stock

Aokin for Raspberry Pi Camera Module 5MP 1080p with OV5647 Sensor Video Camera Module for Raspberry Pi Model A/B/B+ Pi 2 Raspberry Pi 3 3B+ Pi 4 and Pi Zero/Zero W with Flex Cable

  • Compatible: camera module fit for Raspberry Pi Model A/B/B+, Pi 2B and Raspberry Pi 3B 3B+, Pi 4B, Pi Zero, Pi Zero W..
  • Ribbon flex cable: 11.81in/30cm golden camera cable specially designed for Raspberry Pi zero/zero w.
  • 5.90in/15cm and 19.68in/50cm white camera cable....
  • Specification: 5 Megapixels sensor with OV5647 webcam sensor in a fixed-focus lens.
  • the high-definition video camera is capable of 2592 x 1944 pixel....
  • Endless creativity: 15-pin MIPI camera serial interface - plugs directly into for the Raspberry Pi board.
  • The camera module size: 25mm×24mm×9mm and....
  • If you have any issues for raspberry pi version 1.3 camera module, please contact us by Amazon message, we will do our best for you..
Check Stock

Aokin for Raspberry Pi Camera Cable, FFC Cable Ribbon Flex Extension Cable 15 Pin 1.0mm Pitch for Raspberry Pi, Octoprint Octopi Webcam, Monitor 3D Printer, etc, 50cm/19.68in

  • The high-quality ribbon flex cable is soft and compact, easy to install, perfect show video..
  • Feature: the fit Raspberry Pi camera cable each end is reinforced with a stiffener to make insertion easier. Work fine with your need and would be flexible with camera placement..
  • Easy to use: directly-pluggable, one end of the cable is 15 Pin 1.0mm Pitch interface to Raspberry Pi camera and another end with 15 Pin 1.0mm Pitch interface to Raspberry Pi board..
  • Compatible: the cable fit for Raspberry Pi Model A/B/B+, Pi 2B, Raspberry Pi 3B, 3B+, Pi 4B, camera module and display.
  • also use for LCD, LCD TV, car navigation, car audio, laptop, PC, DVD player, recorder, printer, copy machine, etc. Model: FFC.
  • If you have any issues for Raspberry Pi Camera Cable, please contact us, we will do our best for you..
Check Stock

BIGTREETECH Upgrade PI TFT70 TFT LCD Display DSI 800x480 for Raspberry Pi Model 3D Printer Controller 7in Capacitive Touch Screen 165X100mm

  • The high-quality ribbon flex cable is soft and compact, easy to install, perfect show video..
  • Feature: the fit for Raspberry Pi camera cable each end is reinforced with a stiffener to make insertion easier. Work fine with your need and would be....
  • Easy to use: directly-pluggable, one end of the cable is 15 Pin 1.0mm Pitch interface to for Raspberry Pi camera and another end with 15 Pin 1.0mm....
  • Compatible: the cable fit for Raspberry Pi Model A/B/B+, Pi 2B, Raspberry Pi 3B, 3B+, Pi 4B, camera module and display.
  • If you have any issues for Raspberry Pi Camera Cable, please contact us, we will do our best for you..
Check Stock

Raspberry Pi Noir Camera Module V2 8MP 1080P for Raspberry Pi 4, 3 B+, 3B, 2B, Pi Zero RPi Infrared Night Vision

  • NEW RASPBERRY PI CAMERA MODULE V2: MX219 8-megapixel sensor with fixed focus lens, which is not only a resolution upgrade, but also a leap forward in image quality, color fidelity, and low-light performance..
  • HIGHER RESOLUTION: NOIR Camera V2, Capable of 3280 (H) x 2464 (V) still picture resolution and supports 1080p30, 720p60, 640×480p90 and VGA90 video modes. No infrared filter, supports night vision..
  • BETTER COMPATIBILITY: This RPi camera module supports all models of Raspberry Pi 4, Raspberry Pi 3, Raspberry Pi 2 and 1 and Jetson Nano Developer Kit..
  • WILD APPLICATION: This pi camera can be used to take high-definition videos as well as still photographs. It can capture IR photographs, better performance in the night and low light vision, especially suitable for wildlife photography, home security and surveillance, NDVI in agriculture, etc..
  • PACKAGE LIST: An 8mp Raspberry Pi official NOIR camera V2 with a 15cm original FFC cable..
Check Stock

Arducam Raspberry Pi HQ Camera, 12.3MP IMX477 Camera Module with CS-Mount Lens, Automatic IR-Cut Switching All-Day Image, Compatible with Raspberry Pi 4 Model B, Pi 3/3B+, and Pi Zero 2W

  • Raspberry Pi HQ Camera: This camera module offers higher resolution, up to 12MP, which can deliver better image quality than 8MP. Also adopting IMX477 sensor for shape image, resolution 4056*3040 pixels, frame rate 30 fps@1080p, 60fps@720p, VGA90 video modes, IR Sensitivity..
  • IR-Cut：The camera can switch IR-CUT filter in and out automatically, supports both day and night vision. which can keep you all-day image..
  • Wide Compatibility: The IMX477 camera module is not only compatible with all models of Raspberry Pi 1, 2, 3 and 4, but also with Raspberry Pi Zero and Zero 2W, which can be easily used with a simple configuration..
  • Package included: Come with a CS-Mount lens and two cables, 300mm 15-22 pin cable for Pi 1-4 connection and 300mm 22-22 pin cable for Pi 0 and Compute Module connection. Note: This camera module supports the latest Raspberry Pi OS Bullseye (released on Jan 28th, 2022) and libcamera apps, not for the previous Raspberry Pi OS (Legacy) users.).
  • Application: This Raspberry Pi HQ camera can be used to monitor 3D printer, and many other vision applications demand IMX477 camera. It can also serve for Artificial Intelligence, like facial recognition, high-speed capturing and so on..
Check Stock

Arducam Pi Camera Cable, Octoprint Octopi Webcam, Monitor 3D Printer, 3.28FT/100CM Long Extension Flex Ribbon Cable for Raspberry Pi

  • 100cm/3.28ft length, 15 Pin 1.0mm Pitch interfaces, longer than the standard Raspberry Pi camera cable..
  • Used on OctoPi, Raspbian, MotionEye for 3D printer monitoring, surveillance camera or other Pi cam projects..
  • Natively compatible with all Raspberry Pi A&B series board, camera module and display..
  • Long enough for mounting the camera, especially useful when you don't want to place the camera near the Raspberry Pi..
  • Arducam is a company dedicated to open source hardware and software, specifically for Arduino and Raspberry Pi camera solutions. We also offer customized turnkey design and manufacturing solution services for customers who want their products to be unique..
Check Stock

MELIFE Octoprint Octopi Webcam Mini Camera Video Module 5 Megapixels Monitor 3D Printer with 3.28FT/100CM Long Extension Flex Ribbon Cable for Raspberry Pi A/B/A+/B+, 2, 3, 3B+

  • 5MP camera module for 3D printer projects with Raspberry Pi, natively compatible with the official Raspberry Pi camera modules and motherboards..
  • Come with extra 100cm/3.28ft extension cable, long enough for mounting the camera, especially useful when you don¡¯t want to place the camera near the Raspberry Pi..
  • Work on raspicam commands and python scripts as you would expect for a new project or drop-in replacement..
  • Used on OctoPi, Raspbian, MotionEye for 3D printer monitoring, surveillance camera or other Pi cam projects..
  • Package includes 2 flex ribbon cables (15cm/100cm) for Raspberry Pi A&B series and 1 5MP camera module. Cable for Pi zero is not included..
Check Stock