Reviews Smittybilt Gas Can Mount

DONSP1986 Reinforced Bicycle Gas Frame with Gas Tank Built in, 2.4L Frame -Gas Motorized Bicycle (Black)

  • Gas Frame 2.4L Requirement on seatpost:27.2mm, Note: buyers need know how to fasten the motor on the pedestal mount of gas frame to prevent crack from vibration which maybe caused crack of frame.
  • Reinforced Black bicycle gas frame Built-in 2.4L gas tank Designed for the 2-cycle engines 48cc/66cc/80cc with 40 to 50mm wide front mount stud spacing.
  • Rear Disc brake bracket and front mount pedestal works well with gas motor front mount bolts 8mm.
  • Frame made especially heavy duty for gas engine applications Available with 135mm rear frame width for either single speed or multi-speed bikes..
  • 38mm diameter downtube 70 degrees angle V frame, the width and Inner Diameter of the bottom bracket:68mmx50.8mm/2.677inx2in.
  • PLEASE NOTE 1: the best safe speed if racing: 35km/h；Head tube: 150mm.
  • This product Comes with 12months Warranty. Any questions,please contact us firstly! we can help you solve the problem until you are satisfied..
Check Stock

Fuel Door Hinge Mount Brasket QMPARTS Gasoline Pack Mount Plate Kit Fits Standard Gasoline Locking Pack Mount to Hold Gas Can Container Up to 2 Gallon Compatible with JK JL JT 2018-2021-1 Pack

  • 【WIDE APPLICATION】NOTE: This backing plate kit only fits DLX PACK MOUNT, LOX PACK MOUNT & STANDARD PAX MOUNT, please check before purchasing! Fuel....
  • 【HEAVY-DUTY HOLDS UP TO 2 GAL】Our gasoline door hinge locking mount can hold securely 2 gallons gas container or water tanks whether you are on....
  • 【EASILY OPEN AND CLOSE CAR DOORS】Wrangler rear door gas can mount will not affect the opening and closing of the vehicle door. Our mounting....
  • 【EASY TO INSTALL】Need Removes Car Door Hinge Bolts! 2019 wrangler gas can mount easy bolt-on installation, no drilling or cutting. The package....
  • 【 SOLID AND DURABLE】Premium heavy-duty mount backing plate kit made of sturdy stainless steel with matt black finish to anti-corrosion and....
Check Stock

BTMETER BT-5800G Ammonia Gas Detector Sensor, Test for 0~100 PPM Nh3 Monitor Gauge with Temperature Humidity Tester

  • ...uracy +/- 2%. Measures ambient temperature from -10 ~ 50 ℃, ℃/℉ switchable.
  • ✅【Ammonia & Temp & Humidity Meter】In a humid, warm environment, ammonia gas is produced faster.Therefore, while detecting ammonia gas, you should also keeping track of the temperature (℃/℉) and humidity..
  • ✅【Tripod Hole for Mounting】Assembled with electrochemical cell sensor for sensitive measurement. With a tripod mount port so you can mount the meter and have it measure ammonia (NH3) Gas Density continuously, keep track of the gas changing in the same spot. Perfect ammonia air detector for poultry farms, horse stables, livestock.
  • ✅【Rechargeable Ammonia Air Gauge】The included USB cable can be connected to the plug for charging. Built with green / red charging indicator light. Remaining power indicator, Auto / Manual power off optional to save your battery..
  • ✅【Alarm Indicator Light】AL1 and AL2 alarm limit values are adjustable. Slow light flash and buzzer indicates alarm level “AL1” reached, Rapid light flash and buzzer indicates alarm level “AL2” reached.This handheld Ammonia detector portable and comes with storage case for testing around.
Check Stock

HUANUO Dual Monitor Mount, Full Motion Monitor Arm Stand, Height Adjustable Computer Monitor Riser with Gas Spring, C Clamp, Cable Management for Two 15 to 27 Inch LCD Screens

  • DUAL MONITOR STAND WITH GAS SPRING ADJUSTMENT – Compared with other monitor stands, HUANUO dual monitor mount built with gas springs instead of mechanical springs, making your monitors stay at a suitable height( gas spring adjustment range:13.8″).
  • SPACE SAVER – Mounted on the edge of the desk via c clamp(max thickness of desk: 2.36″), HUANUO dual monitor desk mount keeps your monitors off desktop without leaving bases on the desk, making your workstation spacious and clutter-free.
  • UNIVERSAL DUAL MONITOR DESK MOUNT – Widely fit most 15″ to 27″ computer monitors from different brand like Dell, AOC, Acer, LG, HP, ViewSonic, BenQ, Lenovo, ASUS etc., weighing up to 17.6 lbs with VESA mounting pattern of 75×75 and 100×100.
  • FULLY ADJUSTABLE MONITOR BRACKET – Designed with removable arms and gas spring construction, this articulating dual arm monitor stand can be easily adjusted with a swivel of 180°, a tilt from -90°to +85°and a rotation of 360°. You can adjust your monitors to different heights or different angles and portrait or landscape position) as you need with ease.
  • OPTIONAL INSTALLATION METHOD – Comes with integr....
Check Stock

2 Truck Upfitters 16' Gas Props (15.7' ext, 9.4' Compressed, 55 lbs of Pressure ea) Compatible with are, ATC, Snugtop, Leer Campers. Measurement REQ'D! Incl 4 Ball mounts+Angled & Straight Fittings!

  • CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL TOPS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation..
  • Truck Upfitters Pair of 55 pound (each) gas struts. 15.7" extended length and 9.4" compressed length. This size of door shock absorber is for tall medium/heavy weight rear or side camper shell doors. Each canopy shock has 55 lbs of pressure, for a total of 110 lbs of pressure. Please note that this does not mean that it can lift something that is 110 lbs. the typical hinged-style door weight for this prop is approximately 70-90 lbs, including the weight of the camper shell locks and keys..
  • These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must....
Check Stock

ErGear Monitor Wall Mount Bracket for 13 to 42 Inch Screens Gas Spring Arm Wall Mount Height Adjustable Articulating Single Wall Stand with Extended Arm Up to 18.3 Inch Fits Four VESA Mounting Sizes

  • Wide Compatibility 13 to 42" Monitor Wall Mount - It’s built for monitor weights from 4.4-17.6lbs and should have backside mounting holes one of the....
  • Premium Gas Spring Adjustment System - The built-in ultra-precision gas spring arm can smoothly adjust your monitor to any height and angle to meet....
  • Full Motion Articulating Monitor Mount - This wall mount monitor arm supports up-down tilt ±45°, left-right swivel 180° and 360° rotation. Provide....
  • Save Space - Compared with the monitor clamped on the desk, the monitor wall mount can save valuable space on the desktop. You don't need to worry....
  • Safe VESA Wall Mount on Wood Stud Wall / Concrete Brick Wall - To keep your expensive device safe and stable, we would suggest you mount the monitor....
Check Stock

HUANUO Single Monitor Mount, Monitor Arm Gas Spring,Monitor Desk Mount Fit 13 to 32 inch Screens, Height Adjustable VESA Mount with Clamp, Grommet Mounting Base, Hold up to 19.8lbs

  • [Ergonomic] This HUANUO gas spring monitor mount is specially designed for ergonomics, aiming to help people work comfortably, and to help people have a better viewing experience..
  • [Adjustable] This monitor arm single can remain completely stable at any angle without any extra work. Compared with other adjustment methods that make you adjust screws repeatedly, this gas spring vesa mount is easy to use, you only need to gently push the monitor stand desk mount up or down with one hand to accurately stop at the most comfortable height (up to 21.6 inch from the desktop)!.
  • [Unique Design] This single monitor mount is designed for smooth linear structure, coupled with a simple and aesthetic black appearance, giving a sense of modern technology, matching with your surrounding environment perfectly. The frosted arm shell means a more comfortable feel and will not show fingerprints easily..
  • [Safer and Sturdier] At HUANUO, we focus on improving the strength and stability of our single monitor stand. The single desk monitor mount uses automotive-grade gas spring cores and has undergone 20,000 motion tests, which means it can be used continuously for more than 5 years without issue..
  • [Efficient space utilization] The c-clamp or grommet mounting base will save more ....
Check Stock

u-Box Spare Tire Jerry Can Mount Fit 5.3 Gallon for Jeep Wrangler JK & Unlimited 07-18

  • u-Box Wrangler Gas Tank Bracket Jerry Can Carrier fits for Jeep Wrangler JK 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Models.
  • Optimally Fitted for 13.77*6.69*18.5 inch 5.3 Gallon Jerry Cans.
  • Includes Ratchet Strap to Fasten the can to the Mount.
Check Stock

Smittybilt 2788 Standard Size Tent Annex

  • Attaches to Smittybilt Overlander Tent (2783) with rugged, heavy duty zippers.
  • Great for changing clothes, providing extra privacy or even sleeping.
  • Heavy duty 80" x 70" removable floor keeps out mud and bugs.
  • Inner door flap allows easy access to your vehicle.
  • mosquito netting can be opened or closed.
Check Stock

Mr. Heater F271239 One-Stop Universal Gas-Appliance Hook-Up Kit,Small

  • 5-piece universal gas-appliance hook-up kit.
  • Comes with everything needed for installing most gas appliances.
  • Includes 18-inch flexible gas line, 3 different couplings and on/off valve.
  • On/off valve provides easy servicing of appliances or summer shutdown.
  • Solid brass fittings. One Stop Universal Gas Appliance Hook Up Kit has everything needed for installation and can be used with gas logs, unvented wall mount heaters, gas stoves, and garage heaters.
Check Stock