Reviews Small Bore Oil Filter Wrench

2Pcs Universal 12 Inch Oil Filter Pliers 2-1/2 to 4-1/2 Inch and Adjustable 3 Jaw Oil Filter Wrench 2-1/8 to 4-1/2 Oil Filter Change Removal Tool Set

  • Package Include - The oil filter wrench set includes a 12 inch long handle grip pliers, and an adjustable 3 jaw 2 way oil filter wrench removal tool for install oil filters and remove..
  • Oil Filter Plier - The long handles plier has a 12 inch long handle, the max jaw open is about 2-1/2 to 4-1/2 inch(63.5 to 115mm), with right angle teeth for grip and a 3-position slip joint design for quickly adjusts to size. Good for almost all of your family vehicles..
  • 3-Jaw 2-Way Oil Filter Wrench - This adjustable oil filter removal tool manufactured from durable carbon steel and is made specifically to be used to remove oil filters ranging from 2-1/8 inch to 4-1/2 inch (54-116mm).
  • The wrench Set are made of hardened steel, high hardness and strength. After drop forged, heat treated steel with rust-resistant finish, durable enough for long time service..
  • Universal Tool - This oil filter wrench remover tool set would help you do the job easily. Recommended for most common size car and stuck engine oil filters. As long as the filter is not too small, it will remove most filters..
Check Stock

Motivx Tools Oil Filter Removal Tool - Adjustable Wrench for 2.5" - 3.25" Small Diameter Spin-On Oil Filters

  • SECURELY GRIP AND REMOVE A WIDE RANGE OF FILTERS – The Motivx Tools MX2330 oil filter wrench removes small 2.5” - 3.25” diameter traditional spin-on or canister style oil filters. The wrench features a tooth style design for a secure grip that won't slip and lets you easily and safely remove the filter..
  • HEAVY DUTY CONSTRUCTION – This removal tool features a .050” captured spring as opposed to the flimsy .020” spring found on other wrenches. The jaws are built tough using nickel plated 4130 chromoly steel and attached to the 3/8” thick solid steel top plate. Low profile design gives you access to tight access spots..
  • EASY TO USE – Simply slide the jaws of the wrench over the filter while slightly rotating to the right (tighten). Once the wrench is seated in place on the filter, use a ratchet and 3/8" extension to begin ratcheting the wrench counter-clockwise (loosen). The jaws will grip the stuck filter tightly and begin loosening it..
  • PROFESSIONAL QUALITY - Motivx Tools is a specialty tool company located in the United States and we take great pride in our products. These oil filter wrenches are b....
Check Stock

AUPREX Oil Filter Wrench 64mm 14 Flute Oil Filter Removal Tool for Toyota,Lexus,Camry,Tundra,Highlander, RAV4, 4 Runner, Scion and Other 2.0L-5.7L Engines with Cartridge Style Oil Filter Housing

  • APPLICATIONS: This oil filter wrench is compatible with Toyota, Lexus, RAV4, Camry, Tundra, Highlander, Sienna and other vehicles equipped with 2.5L to 5.7L engines that use Toyota's cartridge style oil filter system. But it is not working on vehicles with disposable traditional spin-on canister filers and the 1.8L engines..
  • HIGH QUALITY MATERIAL: This Toyota oil filter wrench is made of high quality 6061 aluminum alloy which provides a great strength to unscrew without any damages or flex on it. The surface of this oil filter is treated with high quality black anodized finish to prevent corrosion..
  • REASONABLE DESIGN: The 64mm 14 flute oil filter wrench is with 4 teeth on the bottom edge to perfectly match the tabs on Toyota style oil filter housing which can efficiently prevent the slippage while unscrewing the oil filter housing..
  • INSTRUCTIONS: The oil filter wrench can be applied to a 27mm socket or 3/8” drive ratchet wrench to install or remove the oil filter. Simply match the wrench on the oil filter cap and unscrew with a socket or ratchet wrench..
  • EASY TO TAKE THE WRENCH OFF: Compare to some oil filter wrenches which are usually stuck on the cap, AUPREX oil filter wrench is easy to release from the oil filter housing..
Check Stock

GearWrench KDT-41890 Oil Canister Socket Set Service Kit - 0.38 in.

  • 32 mm. Oil Filter Cap Wrench (KDT - 3932).
  • 27 mm. Oil Filter Cap Wrench (KDT - 3933).
  • 36 mm. Oil Filter Cap Wrench (KDT - 3934).
  • 24 mm. Oil Filter Cap Wrench (KDT - 3935).
  • 29 mm. Oil Filter Cap Wrench (KDT - 3936).
Check Stock

TOYOTA Genuine OEM 00279-0WQTE-01 Oil (4 QUARTS)

  • STRONG AND DURABLE: This oil filter wrench is made of high-quality aluminum alloy, ensuring strength and durability. The surface of the oil filter cap removal tool is treated with a high quality black anodized finish, anti-rust and anti-corrosion to prolong the service life of the tool..
  • APPLICATION: Install the 64mm 14 flute cup style oil filter wrench on the filter cover, it can clamp and provide maximum torque with multiple contact points to rotate the extremely tight oil filter cover, and cooperate with a 27mm socket or 3/8” (10mm)drive ratchet wrench to loosen it..
  • APPLICABLE MODELS: Oil filter cover removal tool is suitable for most car models, such as Toyota, Lexus, RAV4, Camry, Tundra, Highlander, Sienna and More vehicles equipped with 2.5L to 5.7L engine that that use Toyota's cartridge style oil filter system. But the filter wrench does not fit the car with disposable conventional spin-on filters and 1.8L engine oil filter cap..
  • DESIGN: The bottom edge of the oil filter wrench has 4 slots for a perfect match with the vehicles using 15620-31060, 15620-36010, 15620-36020 oil filter housing covers. The tooth-like s....
Check Stock

XtremepowerUS 2-1/2 to 4 Two Way 3 Leg Oil Filter Wrench Remover

  • Wide Application - The oil filter wrench can be adjust to remover the filters from 2-1/2 inch to 4 inch filters. Fits 1/2 and 3/8 inch square drive....
  • Special Design - The oil filter wrench is specially designed with three jaws. These three jaws will catch the filter more tightly..
  • Function Type -The oil filter wrench is a universal tool to remove the filters on your vehicles. Sometimes the filters are very tough. Then you need a....
  • High Quality - The oil filter wrench is made of 45# carbon steel. This kind of material is much stronger than the normal materials. With the shinning....
  • Easy to use - This Oil Filter Wrench is used to remove the oil filter from cars and trucks. It is adjustable simply adjust it on the filter by turning....
Check Stock

7-Piece Oil Filter Cap Wrench Tool Kit Includes 24mm,27mm,29mm,30mm,32mm,36mm,38mm Socket Set Compatible with Mercedes Benz VW BMW and More Automotive Cartridge Oil Filter Housing Black

  • COMPZTIBLE WITH - Ibetter oil filter cap remover set is suitable for the oil filters with canister oil filter housing and plastic cap/lid that....
  • PAKAGE LIST – Ibetter 7-Piece oil filter cap wrench tool kit includes 24mm oil filter wrench,27mm oil filter wrench,29mm oil filter wrench,30mm oil....
  • SUPER DURABLE - Ibetter oil filter wrenches are constructed from high-quality material which could absolutely ensures strength and durability..
Check Stock

OEMTOOLS 25101 3-Jaw Adjustable Magnetic Oil Filter Wrench, Oil Filter Wrench Small, Oil Filter Wrench Adjustable, Black and Green

  • APPLICATIONS GALORE: This adjustable oil filter wrench removes oil filters on many domestic and foreign light trucks and passenger vehicles, as well as motorcycles and lawnmowers.
  • EXTRA GRIP: Our oil filter puller includes a magnetic base attachment that keeps the oil filter remover securely in place while you remove filter caps.
  • VERSATILE: This auto adjustable oil filter wrench fits filter sizes between 2.4 to 3.6 inches (60MM to 93MM).
  • HOLD ON TIGHT: Our adjustable filter wrench features spring-loaded jaws for a more secure grip than the average oil filter claw wrench.
  • DON'T GET STUCK: Working in tight areas is hard enough without stuck on filters.
  • This compact adjustable oil filter removal tool removes tough filters in tight spaces.
Check Stock

A ABIGAIL Adjustable 3 Jaw Oil Filter Wrench Tool Best for Removing Motorcycles Cars Trucks & Heavy Duty Oil Filters Fits Diameters 2 1/8-4 1/2 Inches Fits ⅜ and ½ inch Drive

  • 【High Quality】 The oil filter wrench is made of 45# carbon steel. This kind of material is much stronger than the normal materials. With the shinning painting on the surface, the filter wrench is totally rust and corrosion resistant..
  • 【Special Design】 The oil filter wrench is specially designed with three jaws. These three jaws will catch the filter more tightly..
  • 【Application】 The oil filter wrench can be adjust to remover the filters from 2-1/2 inch to 4.5 inch filters.Fits 1/2 and 3/8 inch square drive ratchet or 7/8 inch wrench in all kinds of vehicles..
  • 【Function】The oil filter wrench is a universal tool to remove the filters on your vehicles. Sometimes the filters are very tough. Then you need a oil filter to make your work easy..
  • 【Service】100% satisfaction guarantee, If you have any issues with the oil filter wrench, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

Heavy Duty 7-Piece Oil Filter Cap Wrench Tool Kit Can Last for Ever Includes 24mm,27mm,29mm,30mm,32mm,36mm,38mm Socket Set Compatible with Mercedes Benz VW BMW and More Oil Filter Housing

  • COMPZTIBLE WITH - Ibetter oil filter cap remover set is suitable for the oil filters with canister oil filter housing and plastic cap/lid that....
  • PAKAGE LIST – Ibetter 7-Piece oil filter cap wrench tool kit includes 24mm oil filter wrench,27mm oil filter wrench,29mm oil filter wrench,30mm oil....
  • SUPER DURABLE - Ibetter oil filter wrenches are constructed from high-quality CR-V steel which could absolutely ensures strength and durability..
Check Stock