Reviews Slotted Strut Channel

Croyant et le mecreant (Coédition MOLS) (French Edition)

  • ✅ Using Simple: Wheel Trolley For use with 1-5/8" Wide and All 1-5/8" or Taller Strut Channel, M10 (3/8inch) Bolt in the middle, 80mm (3.15inch) in length,Design Load in 770 pound..
  • ✅ High strength:The pin shaft in the strut channel trolley bearing is made of solid alloy steel, which ensures the high strength of the Wheel trolley.Intermediate support of solid steel, high strength, impact resistance.Galvanized Zinc, rust protection.
  • ✅ Operate Steadily: Wheel Trolley Standard deep groove ball bearing installation, is very smooth no noise to it when used.Bearing welding positioning, to ensure the stability of the work..
  • ✅ Can used upside down: 3 nuts are prepared in the accessory,so that you can use the dollies upside down..
  • ✅Apply: For use with 1-5/8" Wide and All 1-5/8" or Taller Strut Channel.
Check Stock

10 Pack P3010 Channel Nut and 1/2 x 15/16 Bolt for All 1-5/8 Strut Channel Channel Steel Screws

  • USE:For use with P1000, P5000, P5001, P5500, P5501 and All 1-5/8" or Taller Strut Channel , Fastening and mounting for Strut Channel..
  • MATERIAL:Zinc-plated hexagon nuts - 1/2"-13 Bolt 1/2" x 15/16", standard size solid and strong..
  • MOUNTING DESIGN:Snap-in design, more solid and easy to install..
  • NOTE:Please confirm your size before purchase, if you have any questions about our products please contact us in time, we will find the most suitable solution for you..
  • MORE PRODUCTS: Scroll down to the detail page to see more products for 1-5/8" strut channel.
Check Stock

BILITOOLS Strut Spreader Tool 2 Piece Suspension Tool Compatible with VW Audi BMW Mini Ford Renault ect.

  • Comes with strut spreader tool with 5.5 x 8 mm and 5 x 7 mm. 1/2" Drive.
  • 2 piece strut spreader is designed to expand the spring strut and ball joint mounting to separate the spring strut from the wheel bearing housing..
  • The strut spreader sockets are made with S2 steel for maximum strength and durability, and to resist rotational distortion..
  • The strut spreader sockets are featured an oval shaped head. This design makes it easier to rotate the strut tool in the strut channel..
  • Compatible with Audi, BMW, Citroen, Ford, Peugeot, Renault, Seat, Skoda, VW and Japanese vehicles.
Check Stock

Strut Channel Nuts 3/8-16 Spring Channel Nuts with Zinc Electroplate Finish Long Spring Nuts Great for Use with Strut Channel 10 Pack

  • Sturdy & Durable: The strut channel nuts is electro-galvanized, which has the effect of anti-corrosion and anti-rust, which is very durable and has a long service life..
  • Wide Applications: These spring nuts are often used on channel struts to attach fittings to channel surfaces..
  • Sturdy & Secure: The reinforced design of the spring nut secures your accessories in the channel, providing extra security for extra security..
  • Standard Springs: Thread Size 3/8"-16, Thick 8mm, Pack of 10.
  • After Sales Guarantee: If you have any questions about our strut channel nuts, please contact us and we will give you a satisfactory answer..
Check Stock

Strut Channel Nuts 1/4-20 Spring Channel Nuts with Zinc Electroplate Finish Long Spring Nuts Great for Use with Strut Channel 10 Pack

  • Sturdy & Durable: The strut channel nuts is electro-galvanized, which has the effect of anti-corrosion and anti-rust, which is very durable and has a long service life..
  • Sturdy & Secure: The reinforced design of the spring nut secures your accessories in the channel, providing extra security for extra security..
  • Wide Applications: These spring nuts are often used on channel struts to attach fittings to channel surfaces..
  • Standard Springs: Thread Size 1/4-20, Thick 8mm, Pack of 10.
  • After Sales Guarantee: If you have any questions about our strut channel nuts, please contact us and we will give you a satisfactory answer..
Check Stock

Strut Channel Nuts 1/2-13 Spring Channel Nuts with Zinc Electroplate Finish Long Spring Nuts Great for Use with Strut Channe 10 Pack

  • Sturdy & Durable: The strut channel nuts is electro-galvanized, which has the effect of anti-corrosion and anti-rust, which is very durable and has a long service life..
  • Sturdy & Secure: The reinforced design of the spring nut secures your accessories in the channel, providing extra security for extra security..
  • Wide Applications: These spring nuts are often used on channel struts to attach fittings to channel surfaces..
  • Standard Springs: Thread Size 1/2"-13, Thick 8mm, Pack of 10.
  • After Sales Guarantee: If you have any questions about our strut channel nuts, please contact us and we will give you a satisfactory answer..
Check Stock

100 Strut Channel Nuts 3/8-16 Spring Channel Nuts with Zinc Electroplate Finish Long Spring Nuts Great for Use with Strut Channel 100 Pack

  • Sturdy & Durable: The strut channel nuts is electro-galvanized, which has the effect of anti-corrosion and anti-rust, which is very durable and has a long service life..
  • Wide Applications: These spring nuts are often used on channel struts to attach fittings to channel surfaces..
  • Sturdy & Secure: The reinforced design of the spring nut secures your accessories in the channel, providing extra security for extra security..
  • Standard Springs: Thread Size 3/8"-16, Thick 8mm, Pack of 100.
  • After Sales Guarantee: If you have any questions about our strut channel nuts, please contact us and we will give you a satisfactory answer..
Check Stock

RHKING 4 Wheel Trolley Assembly Roller Trolley 2Pcs Silent M10 Bolt for use with 1-5/8\ Wide and All 1-5/8\ or Taller Strut Channel

  • ✅ Using Simple: Wheel Trolley For use with 1-5/8" Wide and All 1-5/8" or Taller Strut Channel, M10 (3/8inch) Bolt in the middle, 80mm (3.15inch) in length,Design Load in 770 pound..
  • ✅ High strength:The pin shaft in the strut channel trolley bearing is made of solid alloy steel, which ensures the high strength of the Wheel trolley.Intermediate support of solid steel, high strength, impact resistance.Galvanized Zinc, rust protection.
  • ✅ Operate Steadily: Wheel Trolley Standard deep groove ball bearing installation, is very smooth no noise to it when used.Bearing welding positioning, to ensure the stability of the work..
  • ✅ Can used upside down: 3 nuts are prepared in the accessory,so that you can use the dollies upside down..
  • ✅Apply: For use with 1-5/8" Wide and All 1-5/8" or Taller Strut Channel.
Check Stock

ATLIN Strut Spreader Tool – Strut Socket for Audi, VW, BMW, Mini, Ford

  • Compatibility – The ATLIN strut spreader is designed to fit any vehicle equipped with a pinch bolt style hub which is commonly found on Volkswagen, Audi, BMW, MINI, Ford vehicles. Some compatible models include the 2005+ VW Golf GTI, Jetta, and Passat.
  • Superior Design – Audi and VW spindle housings may require a significant torque to spread apart. Unlike other brands, the ATLIN strut removal tool features an oval shaped head. This design makes it easier to rotate the strut tool in the strut channel.
  • Low Profile – Most strut socket tools are difficult to use due to their length. The ATLIN strut spreader tool was designed to be as low profile as possible, allowing it to fit in tight spaces, thus making your job much easier.
  • High Quality – Crafted from hardened S2 tool steel, a material used in premium tools and known for its extreme toughness, this spreader socket will not yield under high torque applications.
  • Size & Materials – 1/2” drive, pry bit measures 5.5x8.2mm, S2 tool steel, chrome vanadium (CR-V).
Check Stock

4 Wheel Trolley Assembly, Stable Welded Roller Trolley for 1-5/8' Wide and All 1-5/8' or Taller Strut Channel (4)

  • Heavy Duty Build: Our roller trolley assembly is made using highs strength solid steel that’s impact resistant and zinc galvanized to offer protection against rust and corrosion. It features a solid bearing steel pin shaft in the strut channel as well.
  • Secure And Stable Performance: The four bearing trolley assembly features a welded bearing and pin shaft to offer more stability for secure use. It uses deep groove ball bearings to make sure you can operate it smoothly without making any noise.
  • For Long Term Use: Each pack comes with 2 beam trolleys that offer just the right balance of quality, durability, and performance. They offer low noise operation as well as being galvanized to provide smooth opening/closing even in the long term.
  • Versatile And Multi-Purpose: Each 4 wheel trolley assembly offers 450 lbs weight support and is suitable for use with 1-5/8" Wide and All 1-5/8" or Taller Strut Channel. It has a Diameter Hole of 9/16" (14mm) and 1/4" (6mm) Thickness.
  • We Have Your Back: If you have any issues with the trolley assembly 4 wheel then just let us know and we will help you resolve them quickly to ensure you are completely satisfied. Please Note: It’s recommended that you use the strut channel horizontally.
Check Stock