Reviews Slide Retainer

Bianchi 105 Minimalist Suede Lined Premium Leather Holster w/Elastic Strap & Leather Tab Tan Right Hand SZ14 Colt 1911 Government Commander Officers or similar Glock 42 Sig Sauer P365 Springfield 1911 A-1

  • Minimalist design with hammer retainer tab.
Check Stock

6 PCS Non Slip Mattress Gripper,Anti Slide Mattress Stopper,Mattress Retainer Bar for Adjustable Metal Bed Frames,Keep Mattress from Sliding(1.18 Inch(3cm))

  • [ Keep Mattress from Sliding] Tired of having to push your mattress back in place every morning？Here is the perfect solution for sliding mattress-Mattress Slide Stopper..
  • You can install these mattress retainer bar very easily, just place 6 non slip mattress gripper on the 3 sides of the bed frame, and then tighten the screws moderately (tightening too tightly will backfire). Effectively prevent the mattress from sliding..
  • The total height of the mattress slide stopper is about 3.5 inches, and the height of the upper part to prevent the mattress from sliding is 1.42 inches, which can stop most thickness mattresses from sliding, this mattress holder in place is suitable for installing on bed frames whose thickness is less than 1.18 Inch(3cm)..
  • The anti slip mattress gripper are made with high-quality steel,Electroplated black to prevent rust and corrosion, Very durable and prevents damage to your bed..
  • Our mattress grippers non slip have three sizes,It recommended that you measure the thickness of your bed frame before purchasing mattress retainer bar,make sure the mattress stabilizer fits the bed frame and holding the mattress in place..
Check Stock

NOVINO 14-1/2Dia X 19Pitch Boat Outboard Propeller for Mercruiser Alpha One Prop/Mercury Engine 135 150 175 200 220 225 250 300HP,3-Blade Aluminum 14.5dia x 19 Pitch Propeller,Replace OEM#48-832830A45

  • ...uiser propeller,lower fuel consumption and great speed acceleration or rmps,,reduce the wear and tear on engine.
  • Easy Install: The propeller with hub kit Includes Flo-Torque hub kit (hub, splined hub, thrust washer, prop nut and keeper),Just remove prop locknut&locknut retainer& forward thrust washer.Then Install forward thrust washer---Insert drive sleeve into prop---Slide prop on prop shaft---Insert drive sleeve adapter--Slide locknut retainer---Install prop locknut---Insert sth to prevent spinning--Tighten prop locknut.
  • Fitment:perfect propeller replacement for 14.5x19pitch Mercury Engines 135 150 175 200 220 225 250 300HP&Mercruiser Alpha One Bravo One,detail information pls see below.
Check Stock

Retainer Case, Slim Aligner Case with Mirror, Compatible with Invisalign, Mouth Guard Case, Cute Retainer Case with Vent Holes, White

  • Special design: Professional retainer case design, just slide left and right to open and close the vents, keep the ventilation also avoid dust contamination of your retainers..
  • High quality: The retainer case is strong and durable with built-in textured padding that helps reduce internal slippage and movement and can be rinsed with water for easy cleaning..
  • Magnetic closure: Built-in magnetic clasp helps keep the case closed and the aligner secure Holder box has a mirror inside for easy wearing of retainers, etc. Ventilation holes in the keeper box..
  • Easy to carry: Light and small nice little case, easy to carry when traveling or on the go. A small and cute home for your retainers..
  • Customer service: If you have any questions or concerns, please feel free to contact us and we will provide professional and sincere solutions within 24 hours..
Check Stock

Jordan Mens Air Jordan 1 High OG DC6515 100 Prototype - Size 10

  • At least two fittings needed per installation.
  • Includes: a retainer ring, slide ring, silicone ring and a high temperature sealing gasket.
Check Stock

Pro-Flex Brass Male Fitting1/2

  • At least two fittings needed per installation.
  • Used to attach CSST Catalog ID: 40753204 or 42847302 to both the beginning and.
  • Includes: a retainer ring, a slide ring, a silicone o-ring and a high temperature sealin.
  • Refer to manual Catalog ID: 42845283 for proper installation.
Check Stock

Plastic Development Group 130-Gallon Weather-Resistant Plastic Resin Outdoor Patio Storage Deck Box with Gas Shock Lid, Driftwood

  • DURABLE DECK BOX: 130-gallon resin storage deck box that is perfectly designed to store outdoor accessories, cushions, tools, pool toys, and more.
  • DOUBLE-WALL DESIGN: Double-wall resin construction, molded lid hinge, gas shock lid retainer ensure security.
  • UNIQUE WOOD-LIKE APPEARANCE: Box is weather-resistant and has a wood-like pattern that is easy to clean.
  • SLIDE AND SNAP ASSEMBLY: Slide and snap design makes this deck box easy to assemble.
  • Comes with all necessary hardware for assembly.
  • DIMENSIONS (D x W x H): 26 x 51 x 26.5 inches.
Check Stock

JOMBULL 9-Way Slide Hammer Puller Set, 19 pcs Rear Wheel Axle Hub Dent Shaft Puller, Slide Hammer Bearing Puller for Hub Seal

  • 【Durable】 Our 9-way slide hammer puller set is made of heat-treated forged steel, polished and chrome-plated to resist rust and wear, extending the service life..
  • 【Application】 The axle hub dent shaft puller is widely used for flanged rear axles, most front wheel drive hubs, pulling dents and other press fit parts..
  • 【Easy to operate】 You only need to install the axle hub dent puller on the part you want to remove, when pulling the T-handle, transfer the force to the shaft, the shaft drives the connecting end to pull out the part, repeat the above steps, the hub or bearing will be easily removed..
  • 【What you get】 Our 9-way slide hammer puller set includes, slide hammer, puller head, pulling adapter, cross block, inner/outer pulling jaw, hex jaw nuts and screws (3pcs), Vise-Grip adapter (single lead thread), sealing hook, 3-way puller head, cone, self-tapping screw and retainer..
  • 【Safe storage】 The slide hammer bearing puller comes in a blow molded case, sturdy and durable, and each piece has precisely sized compartments, easy to store and carry..
Check Stock

Rexka 20pcs 10mm Hole Bumper Engine Cover Fender & Grille Clips Compatible with Subaru 909140007 Baja Forester Impreza Legacy Outback Tribeca 2011-2000

  • Other Names:Under Cover Clip, Grille Clip, Fender Liner Clip, Splash Shield Clip, Fender Liner Retainer Clip, Lower Cover Clip, Sight Shield Clip, Cover Clip, Reinforced Beam Clip, Side Cover Clip, Bumper Cover Retainer Clip, Lower Bracket Retainer Clip, Fender Liner Retainer, Suspension Cross-Member Clip, Wheelhouse Liner Retainer, Grille Assembly Clip, Plate Clip, Pad Clip, Bumper Cover Fastener, Reinforcement Fastener, Guide Clip, Side Retainer Rivet, Upper Quarter Trim Fastener..
  • Upper Seal Clip, Corner Support Clip, Protector Clip, Under Cover Retainer Clip, Upper Bracket Clip, Grille Bracket Clip, Lower Bracket Clip, Retainer Plate Clip, Upper Plate Clip, Bracket Clip, Fog Lamp Assembly Clip, Side Bracket Retainer Clip, Upper Cover Retainer Clip, Cover Plate Clip, Hole Cover Clip, Pillar Trim Clip, Closure Panel Clip, Spoiler Clip, Protect Shield Clip, Backup Lamp Clip, Duct Clip, Outer Cover Clip, Bumper Cover Retainer, Bumper Cover Side Bracket.
  • Replaces Subaru: 90914-0007 Fits: Subaru: Ascent, B9 Tribeca, Baja, BRZ, Crosstrek, Forester, Impreza, Legacy, Outback, Tribeca, WRX, WRX STI, XV Crosstrek.
  • Head Diameter: 21mm Stem Length: 15mm Fits Into 10mm Hole.
  • This is the most common Clip for Subaru cars. Commonly Used in Front Bumper, Front Grille,....
Check Stock

Plastic Development Group 73 Gallon Weather Resistant Resin Outdoor Storage Deck Box with Slide and Snap Assembly, Java Brown

  • STORAGE DECK BOX: 73-gallon resin storage deck box that is perfectly designed to store outdoor accessories, cushions, tools, pool toys, and more.
  • DOUBLE-WALL DESIGN: Durable, double-wall resin construction, molded lid hinges, and reliable lid retainer straps ensure ultimate security.
  • UNIQUE APPEARANCE: Designed with a brown wood-like pattern that is easy to clean and resists the server outdoor elements for long-lasting use.
  • SLIDE AND SNAP ASSEMBLY: Slide and snap design makes this deck box easy to assemble.
  • Includes all necessary hardware that you need to assemble.
  • SPECIFICATIONS: Measures 22 inches deep, 43.5 inches wide, and 21.8 inches tall.
Check Stock