Reviews Sleeve Anchor Screw

AKKTOL Hollow Plaster Wall Drywall Anchor Setting Tool with 35 PCS Molly Bolts in 7 Sizes Heavy Duty Storage Box Included

  • Easy to Use: With this tool, you just drill the hole, drive the anchor into the drywall, back the screw out about 1/4", mount the tool and squeeze. The tool ratchets and pulls the screw out, expanding the anchor perfectly..
  • Strong & Reliable Connection: Made of zinc-plated carbon steel, the largest of these sleeve-type dry wall anchors will safely hold items up to 50 pounds, the smallest anchors hold up to 18 pounds and the medium-size anchors hold up to 25 pounds. You’ll find these mollies suitable for hanging coat racks, mirrors, and other medium-weight items..
  • Durable Setting Tool: This hollow wall anchor setting tool is made of 2.5mm thickened REINFORCED CARBON STEEL with heat treatment which protects against corrosion and resists to deformation. With ergonomic type shape non-slip grips, protects you from getting hurt when using it..
  • Wide Application: Widely used in drywall, hollow block, plaster, tile, perfect for hanging coat racks, mirrors, and other medium-weight items..
Check Stock

E-outstanding Sleeve Anchor 10PCS 304 Stainless Steel Sleeve Bolts for Concrete, Masonry and Brick M6x70mm

  • Size: M6x70mm. Total length: 70mm. Sleeve length: 50mm. Screw diameter: 6mm. Sleeve diameter: 8mm..
  • Made of high-quality 304 stainless steel, corrosion-resistant, sturdy , durable and long service life..
  • Can be installed in various masonry, solid concrete, bricks or blocks..
  • The anchor needs to drill an 8mm hole in the base material (concrete, bricks and bricks), which should be drilled with a carbide drill bit and used for hammer drilling..
  • The hole in the fixing device or the material to be fixed must be larger than the specified diameter of the anchor. M6 diameter anchoring requires 8mm holes on the fixing device..
Check Stock

320PCS Plastic Drywall Wall Anchors Screw Assorment Kit Self Tapping Screws and Ribbed Wall Anchors Assorted Sizes Wall Plug Bolts Expansion Bolt for Wallboard Concrete Pciture Hanging

  • ...e in bad environment ensure long time using and prolong screws lifespan..
  • 【TORAGE】Drill hole with effcient drill bit, embed the anchor, screw the anchor. The split in the ribbed anchors expand on two opposing sides as you tighten the screw, increased holding power, Anti-rotation structure design of the expansion sleeve, tighten the screw will not be followed in the drilling rotation..
  • 【SERVICE】We take pride in delivering a quality product. They are practical products, small size, large load, wide range of uses, installation quick and easy. It's packed in a durable plastic box, convenient for your use and storage. If you are unhappy for any reason contact us and we will respond to you within 24 hours..
Check Stock

BoltHold - SP12-38 Zinc Plated Steel Asphalt Anchor (5/8\ x 12\) - with 1\ Hex Bolt & Washer - Chemical Anchors - for Installation of Sheds, Carports, Bike Racks, & More - 2000 lb Pull Rated - 6 PK

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

Swpeet 220Pcs Assorted Sizes Hollow Self Drilling Drywall Anchors Kit, Plastic Self Drilling Drywall Ribbed Anchors Assortment with Screws Perfect for Fixing Curtains, Calligraphy, Wall Cabinets

  • 1, HIGH QUALITY --- The anchor original plastic pipe, PP injection molding, high elasticity, thick wall, continuous folding, toughness and impact resistance..
  • 2, REASONABLE DESIGN --- The expansion is more complete, the screw in design, the design is more reasonable and simple, the plastic tube firmly holds the screws, the screws are thickened, so that the tube is fully expanded.The split in the ribbed anchors expand on two opposing sides as you tighten the screw , increased holding power,Anti-rotation structure design of the expansion sleeve, tighten the screw will not be followed in the drilling rotation.
  • 3, WITH SCREWS --- With high quality screws, high hardness, thread sharp, not easy to deformation, can make the expansion pipe fully open, high stability..
  • 4, HEAVY DUTY --- The blade of plastic pipe is installed to prevent the expansion pipe from rotating and increasing friction. The good expansion curve design greatly increases the fixed force..
  • 5, WHAT YOU GET --- You will get 100Pcs wall anchor with100Pcs self-tapping screws. What's more, There including 10pcs Self-Drilling Drywall Zinc Anchors with 10Pcs Screws. They can meet all your needs!.
Check Stock

Treasure Gurus 20pc Concrete Masonry Nut Bolt Anchor Sleeve Assortment DIY Home Project Hardware Kit

  • Product Contect: 10pcs x Hollow Wall Anchor, 10pcs x Screw Eye.
  • Fit Wall Thickness: 3mm-32mm / 0.12''-12.6''.
  • Screw Eye Size: 68 x 18 x 11mm / 2.68" x 0.71" x 0.43" (L*OD*Inner D).
Check Stock

2 Pcs 10mm Screw Pin Anchor Shackle 3/8 Inch 304 Stainless Steel Shackle for Rigging, Chains Wirerope Lifting.

  • 1/2 Inch Anchor Shackle: Made of 304 stainless steel, one-way screw, bolt design, higher hardness, moisture-resistant, acid and alkali resistant, anti-rust, Connect loose ends of cables, chains, tow straps and snatch blocks..
  • Anchor Shackle Size: 2 Pcs 3/8"(10mm) Bow Shape Screw Pin Anchor Shackle, one-way screw, bolt design, Max Open Width: 22mm, Working Load Limit: 2000lbs, Breaking Load: 8000lbs..
  • Easy to Use: Make sure that the pin is properly screwed into the bow shackle hole, tighten it by hand, it with a wrench or other suitable tool, The best use of connection accessories, is perfect for use with ropes..
  • Wide Application: Screw pin anchor shackles, used for sailing hardware, towing, hiking and other outdoor sports, Great for boats, jeeps and other applications for tie downs, towing, could be also used in loading and unloading of goods..
  • Hardware Parts: These shackles hooks for anchoring, binding, rigging all types of hardware, always used together with a expansion hook and stainless steel chain, apply to a variety of boat or household applications..
Check Stock

1 Pcs 12mm Screw Pin Anchor Shackle 1/2 Inch 304 Stainless Steel Shackle for Rigging, Chains Wirerope Lifting.

  • 1/2 Inch Anchor Shackle: Made of 304 stainless steel, one-way screw, bolt design, higher hardness, moisture-resistant, acid and alkali resistant, anti-rust, Connect loose ends of cables, chains, tow straps and snatch blocks..
  • Anchor Shackle Size: 1 Pcs 1/2"(12mm) Bow Shape Screw Pin Anchor Shackle, one-way screw, bolt design, Max Open Width: 1" (25mm), Working Load Limit: 1400kg / 3086lbs, Breaking Load: 5500kg / 12125lbs..
  • Easy to Use: Make sure that the pin is properly screwed into the bow shackle hole, tighten it by hand, it with a wrench or other suitable tool, The best use of connection accessories, is perfect for use with ropes..
  • Wide Application: Screw pin anchor shackles, used for sailing hardware, towing, hiking and other outdoor sports, Great for boats, jeeps and other applications for tie downs, towing, could be also used in loading and unloading of goods..
  • Hardware Parts: These shackles hooks for anchoring, binding, rigging all types of hardware, always used together with a expansion hook and stainless steel chain, apply to a variety of boat or household applications..
Check Stock

T.K.Excellent Phillips Pan Head Self Tapping Screws and Ribbed Anchors Assortment Screws Kit,400Pcs

  • The split in the ribbed anchors expand on two opposing sides as you tighten the screw , increased holding power.
  • Plastic material expansion sleeve low cost, no rust, corrosion resistance, anti-aging, good toughness.
  • Once anchor installed, they provide a flush, clean appearance in drywall.
  • Toggle bolt's wings spreads the force over the bearing surface, comes attached to a screw, use in concrete and brick.
  • Kit includes:anchors:#6-#8,#10-#12,#12-#14.
Check Stock

Better Boat 4 Foot 1/4\ Stainless Steel Anchor Chain and Double Shackle Link Ends Marine Grade

  • PREMIUM STAINLESS STEEL: Our Marine Grade 4 ft stainless anchor line is made from 1/4" 316 Stainless Steel along with 2 bow shackles also constructed from 316 stainless steel. Unlike the galvanized chain alternatives, these boat anchor chain options are designed to last and avoid corrosion..
  • SAFE AND RELIABLE: Our double threaded bow shackle pins prevent the screw from coming loose and falling from the anchor chain. The chain is abrasion resistant and weighted to properly keep your anchor shank parallel with the sea floor. The chain offers a 5110lbs break load while the shackles offer a break load of 5510 lbs..
  • COMPATIBILITY AND FLEXIBILITY: Our large 5/16" stainless bow shackles are designed to work with almost all anchor rope. Works great with our separately sold anchor lines and their pre spliced stainless thimble. The screw pin anchor shackles with chain will work with traditional fluke anchors, box anchor, spade anchor and others..
  • EASY SEAMLESS UPGRADE: Whether your upgrading your boat anchors and looking for a more reliable anchor chain, or outfitting a new boat, this is your solution. Not all chains are created equally, and we completely stand behind our stainless chains to provide superior performance. This allows you to worry about the anchor ....
Check Stock