Reviews Sinumerik 802s Base Line

Goture Fishing Line Spooler Winder Machine //Unwinding Function//Reel Spooler Fishing Line Winder Spooler Machine Spooling Station System Fishing Reel Winder Spinning Cast Spincast Trolling Reel

  • ...ty spool. Equipped with two stainless steel shafts, 6.9 inches and 3.9 inches respectively. The maximum total thickness of the holding reel is 5.4 inches. (Single disc or disc) reel can rotation and revolution. With three types of clamps make it works excellently with both wide and narrow spools..
  • 【Two-Point Fixed Base & Non-Slip and Stable】The fishing line spooler winder adopts a two-point fixed base. The upper top of the base is composed of rugged silicone. Rugged silicone surface plus large stressed area, making the base not easy to slip and more stable. All you need to do is to fix the tool to the table through two clamp screws. The fishing spooler machine can be fixed on a table of 5 to 50mm..
  • 【Durable and Super Lightweight】Made with a unique blend of aluminum alloy, stainless steel, and high strength nylon which not only makes it incredibly strong but also makes it super lightweight as well. No deformation and no rusty, it can serve you for a long time. It is easy to use, and portable for storage. You can take it anywhere, spooling fishing line by yourselves..
  • 【Universal models & Warranty】It works fantastically well with both small and large spools. The maximum width of the spool ranges up to 5.4in. The line spooler works great wi....
Check Stock

RCA DECT 6.0 Accessory Handset RCA-H5401RE1,Black

  • RCA DECT 6.0 Accessory handset to 4-Line Corded Base System.
  • Does not work independently, and must be used with a RCA 4-Line Corded Base Station.
  • For the RCA-25423/25424/25425 (4-line corded systems).
Check Stock

Woodpeckers Auto Line Drill Guide, Portable Drill Guide, Drill Up To 2 Inch Holes, Versatile Base and Fence System

  • KEEP YOUR DRILL BIT PERFECTLY PERPENDICULAR - The Auto-Line Drill Guide is a portable tool that allows you to drill perfect perpendicular holes up to 2 inches without a drill press..
  • LASER ENGRAVED CENTER LINES - The base of the Auto-Line Drill Guide has laser engraved centerlines on the perimeter of the opening..
  • DRILL UP TO 2" HOLES - The opening in the base has clearance for drills up to 3/4", and when you need larger, simply remove the column caps, turn the chuck carrier around so it is outside the base and drill up to 2" holes..
  • VERSATILE FENCE - The fence adjusts to the base along a pair of stainless steel guide rods. The base is drilled and tapped for the fence guide rods on all four edges so there's always a direction you can extend the fence..
  • MADE IN THE USA - The Auto-Line Drill Guide is precisely machined and carefully inspected in our Strongsville, Ohio factory (just south of Cleveland)..
Check Stock

Motorola ML25260 DECT 6.0 Expandable Corded 2-Line Business Phone with Full Duplex Speakerphone and Caller ID/Call Waiting Bundle with Blucoil 10-FT 1 Gbps Cat5e Cable and 6 AAA Batteries

  • BUILD A FLEXIBLE 2-LINE PHONE SYSTEM - The Motorola ML25260 Telephone functions as a standalone base station or add-on "auxiliary" desk phone. You can connect this telephone to a single 2-line RJ14C or dual 1-line RJ11C wall jacks..
  • ADD MORE EXTENSION PHONES AS YOUR BUSINESS GROWS - You can pair this ML25260 telephone with Motorola's ML25254 base station as a desk phone extension. Add up to ten ML25260 units on the system..
  • OFFERS SECURED COMMUNICATION - ML25260 uses interference-free DECT 6.0 wireless technology with up to 150-FT operating range. No need to worry of call dropouts or eavesdroppers. Motorola utilizes a digital security system to protect your phone line..
  • SUPPORTS CALL WAITING CALLER ID - Instantly see the caller's name/number on ML25260's screen before you pick up the line. *NOTE: You must be subscribed first to your phone provider's Call Waiting CID service to access this feature..
  • INCLUDES - Motorola ML25260 2-line DECT 6.0 Base Station and Desk Phone Extension.
  • Short Line Cord. Blucoil 10-Foot Cat5e UTP Cable with RJ45 Connectors - 24 AWG Wire Copper. 6-Pack of Blucoil 1.5V AAA Alkaline Batteries..
Check Stock

Storkcraft Tuscany Custom Glider and Ottoman Replacement Base (Without Cushion Set) (Espresso)

  • REPLACeMENT BASE: Designed to fit your Storkcraft Tuscany Glider and Ottoman, this 2 piece set of replacement base will allow you to update the look of your Storkcraft Hoop Glider and Ottoman to fit with your current tastes and room style..
  • 2 PIECE SET: This replacement base set contains a total of 2 pieces, including the glider base(1) and ottoman base(1).
  • GUARANTEED FIT: This authentic set of replacement base is an official Storkcraft product, so you won’t have to worry about it fitting your Storkcraft Tuscany Glider and Ottoman cushions..
  • SMOOTH GLIDE: Featuring metal, enclosed ball bearings for a smooth glide motion to help you unwind.
  • UNIQUE QUALITY: For 70 years, Storkcraft has been manufacturing quality furniture for infants, toddlers, kids, and teens. Compare our line of innovative products to those from Angel Line, Delta Children, Baby Relax, DaVinci, Shermag or Dutalier..
Check Stock

Innovative Tip Down (for 2019 (3 Pack, Orange)

  • ...t, Built to last, and Simple to use and even Affordable!!.
  • THE INNOVATIVE TIP DOWN is a three-part ice fishing system that is compact when stored and easy to use when set up. Each Innovative Tip-Down comes with the following parts: The storage tube, which holds the rod and base. The rod, which is 20" long. It’s stiff, but still bends for superior hooking. The base, which supports the Tip-Down, harnesses the rod, and screws into the storage tube..
  • THE STORAGE TUBE IS HARD PLASTIC. It has an extendable rod holder that can be set as high as 36" or as low as 24". The extendable holder has a lanyard for easily pulling the holder out of the tube and for easy handling when moving the set-up. It slides up and down easily but will never slip. The pivot pin of the rod sits in the holder’s upper notches..
  • THE ROD IS 20" and has line guides including a special line guide just above the reel to prevent spool tangles. The reel has a folding handle for easily reeling in your line and lure. Each reel can handle over 100 feet of line. When a fish strikes, the rod goes down and stays down as long as the fish is on. If....
Check Stock

RCA 25423RE1 ViSys 4-Line Expandable System Phone with Intercom

  • System Expandable up to 16 Base Stations.
  • Each Base Station Can Expand to Include One DECT 6.0 Accessory Cordless Handset - Handset Sold Separately.
  • Compatible with the RCA-25424RE1and RCA-25425RE1, and also the GE-29487/88, GE-25403/404/405, RCA-25413/414/415, and the 25424/425 series.
  • Compatible with the following: GE 29487 and GE 29488 Series, RCA 25403.
Check Stock

Innovative Tip Down (Orange - Your Next All-in-One Ice Fishing Set Up (2-Pack)

  • ...t, Built to last, and Simple to use and even Affordable!!.
  • THE INNOVATIVE TIP DOWN is a three-part ice fishing system that is compact when stored and easy to use when set up. Each Innovative Tip-Down comes with the following parts: The storage tube, which holds the rod and base. The rod, which is 20" long. It’s stiff, but still bends for superior hooking. The base, which supports the Tip-Down, harnesses the rod, and screws into the storage tube..
  • THE STORAGE TUBE IS HARD PLASTIC. It has an extendable rod holder that can be set as high as 36" or as low as 24". The extendable holder has a lanyard for easily pulling the holder out of the tube and for easy handling when moving the set-up. It slides up and down easily but will never slip. The pivot pin of the rod sits in the holder’s upper notches..
  • THE ROD IS 20" and has line guides including a special line guide just above the reel to prevent spool tangles. The reel has a folding handle for easily reeling in your line and lure. Each reel can handle over 100 feet of line. When a fish strikes, the rod goes down and stays down as long as the fish is on. If....
Check Stock

INSPIRITECH Tile Laser Level Self Leveling 3D Alignment Guide,3x360° Horizontal Vertical 12 Cross Lines, Green Beam Lazer Leveler Tool for Floor Ceiling Wall with 2 Lithium Batteries

  • ... horizontal line, easy for two walls tiling work at the same time. Laser projection cover ceiling, wall, floor..
  • ✔️【Various Mounting Options】Slotted metal plate and magnetic wall bracket allow laser level to be fasten to wall, wood while using for Wall Tiling or Suspended Ceiling. 360 degree Rotary Fine tune base help to mounting laser leveler on Telescoping pole or place the line laser level at spots not otherwise reached by a tripod for wall or ceiling works and cabinet installation. when laying floor tile, scissor lift base works for fine tune horizontal line projection height range from 25-80 mm..
  • ✔️【2 Batteries and Remote Controller】Each battery works for approx 3 hours, you can continue to work while extra one backup battery is charging with fast charger. INSPIRITECH Laser floor level also works while in charging, last you the full day if you need a level all day. The remote is super handy when you want to turn the light on/off without the risk of moving laser level,so user do not have to climb down & up ladder during Ceiling Tile work process. Brightness adjustable by remote control..
  • ✔️【What you get】1 x 3D INSPIRITECH 360 LASER LEVEL, 2 x 6000mAh Lithium batteries, 1x Remote control, 1x Nail slotted metal plate, 1 x Magne....
Check Stock

Prime-Line N 7536 Sliding Closet Door Roller Kit, 7/8 inch Wheel Diameter, Convex (Round) Edge Plastic, Stamped Steel Construction, Includes 1/8 inch and 3/8 inch Offset Pairs, Fits Stanley, Pack of 4

  • Includes one spring-loaded Prime-Line part N 6611 top roller guide with a 3/4 in. plastic wheel, and a 3/8 in. diameter nail-down style base.
  • One spring-loaded Prime-Line part N 6614 top roller guide with a 7/8 in. plastic wheel, and a 3/8 in. diameter nail-down style base.
  • One spring-loaded N 6612 top pivot with a 1/4 in. diameter steel pivot and a 3/8 in. diameter nail-down style base.
  • One adjustable Prime-Line part N 6613 bottom pivot with a 1/4 in. diameter steel pivot and a 3/8 in. diameter nail-down style base.
  • All items are spring-loaded except for bottom pivot.
  • Installation fasteners included with this item.
Check Stock