Reviews Sink Grid

Sink Protection Grid 28-5/8' x 14-5/8', Rear Drain with Corner Radius 0 or 3/16', 304 Stainless Steel for Kitchen Sink BEHOK BH-2814 Sink Grate

  • FITS STANDARD SIZES SINK: This BEHOK sink grid length 28-5/8", width 14-5/8", height 1", with rear drain corner diameter 5" for bottom of sink, fit sinks corner radius R0 or 3/16". Please notice your sink's size and drain location. (Note: Please measure the inner dimension of your sink. It's VERY IMPORTANT to measure the dimension of your sink bottom at 1 inch height, DON'T from the sink bottom directly.).
  • HIGH-QUALITY STAINLESS STEEL: Made of food-grade 304 stainless steel, allowing direct contact with food. It’s durable, corrosion-resistant and rust-resistant. Attractive, stainless steel finish gives bottom grid a pristine look that complements all sink materials..
  • MULTI FUNCTION: This BEHOK sink grid can use on many purposes. You can use it as a drain rack, cooling rack, defrosting grid, drying grid, dishware drainer, etc..
  • PROTECT SINK BOTTOM: With protective rubber feet and bumpers to protect the bottom of your sink. Additional replaceable parts extend the service life of the product..
  • EASY TO CLEAN: Fits comfortably inside the dishwasher for convenient cleaning. Note: Must remove the rubber feet before placing grid in dishwasher..
Check Stock

Serene Valley Sink Bottom Grid 26-15/16\ X 14-1/16\

  • IMPORTANT NOTICE: The VIDEO on the product picture display shows you how to measure our sink to find a matching grid. It takes you 2 minutes to watch but potentially save you a lot of time and trouble if ordering a wrong grid can be avoided. If you are not sure how to measure your sink to match our grid, please contact us by email or message, we will respond to you in 12 hrs to help you..
  • Grid dimension: 26-15/16" X 14-1/16" for your sink bottom with Corner Radius 2"..
  • 304 Premium stainless steel to ensure durability and rust-free with limited life warranty and protect your kitchen sink from daily wear..
  • Please refer to the video shown at the bottom of the product picture display for more detailed info on measuring your sink to fit our grid. This info is VERY important and could save you a lot of time if ordering a wrong grid can be avoided..
Check Stock

Serene Valley Sink Bottom Grid 29-1/16\ X 13-15/16\

  • IMPORTANT NOTICE: The VIDEO on the product picture display shows you how to measure our sink to find a matching grid. It takes you 2 minutes to watch but potentially save you a lot of time and trouble if ordering a wrong grid can be avoided. If you are not sure how to measure your sink to match our grid, please contact us by email or message, we will respond to you in 12 hrs to help you..
  • Grid dimension: 29-1/16" X 13-15/16" for your sink bottom with Corner Radius 2"..
  • 304 Premium stainless steel with heavy-duty design (outer wire diameter 1/4" and inner wire diameter 1/8") to ensure durability and rust-free with limited life warranty and protect your kitchen sink from daily wear..
  • Please refer to the video shown at the bottom of the product picture display for more detailed info on measuring your sink to fit our grid. This info is VERY important and could save you a lot of time if ordering a wrong grid can be avoided..
Check Stock

ARLBA Kitchen Sink Protectors for Kitchen Sink W/Rear Drain Hole,304 Stainless Steel Sink Grid 16x13,Metal Sink Mat Sink Grate Protector Sink Rack for Bottom of Sink w/Sink Strainers & Rubber Feet

  • ✅【Stainless Steel Sink Protectors for Kitchen Sink】- The ARLBA Stainless Steel Sink Bottom Protective Grids (Size: ,13″x16″ ) with protective rubber feet and bumpers not only protect the bottom of your sink from scratches and damage by pots, pans, plates, silverware, glasses, and so on, but also be used as an in-sink drying rack for tableware, vegetables ,fruits ,glassware, utensils and pans .Open grid design allows water to drain while in use. Ideal for kitchen, bathroom, and laundry room sinks..
  • ✅【304 stainless steel Sink Grates Sink Mat】- This premium-quality sink grids are Made of food-grade 304 stainless steel, can be in direct contact with food, They are resistant to corrosion and rust，strong sturdy and durable. The welds are clean and splatter-free and the wire ends are ground smooth .It is more durable and lasts longer than silicone sink mats.
  • ✅【Multifunctional Sink Rack for Bottom of Sink 】 – Our Sink Bottom grid of kitchen sink with rear drain position can improve drainage in your sink, which can allow water to flow away freely underneath your dishes and cutlery. These sink grid can meet your different needs : Not only can you use it to dry dishes, vegetables and fruits, but you can also use the sink protector as a k....
Check Stock

iDesign Euro Plastic Saddle Glassware and Sink Protector for Kitchen Bathroom Pots Pans Dishes 11 x 12 Clear

  • SINK PROTECTORS FOR KITCHEN SINK – Protect your dishes and your sink from damage when washing and drying with the iDesign Kitchen Sink Protector.
  • ideal for use in kitchen, bathroom, and laundry room sinks.
  • OPEN DESIGN – The elegant grid design of the plastic sink saddle prevents water and bacteria from being trapped between the kitchen sink mat and the sink divider wall.
  • STAYS IN PLACE – Features sturdy, easy to apply suction cups that stick to the sink wall to prevent the sink grid from sliding around.
  • DURABLE – Crafted from a strong plastic construction, the sink protector mat is designed to withstand years of use.
  • IDEAL SIZE – The kitchen sink grid measures 11” x 12” and fits over most sink dividers.
Check Stock

Zeesink Kitchen Sink Grid,Sink Grid andSink Protectors for Kitchen Sink,Size 26\ X 14 3/8\ Sink Bottom Grid,Sink Grate Center Drain

  • Stainless Steel Sink Protector with Size:26" X 14 3/8"..
  • Sink Protector with Stainless Steel Construction and Center Drain Hole Design..
  • Kitchen Sink Grid with Protective Rubber Feet and Bumpers to Protect the Sink Surface from Scratching..
  • Sink Bottom Grid can also be Used as Drying Sink Racks for Glassware and Dinnerware..
  • How to Choose Correct Sink Protector Grid Size: Measure the Length and Width Inside the Sink, from 1" High of the Sink Bottom..
Check Stock

Zeesink Sink Grid and Sink Grate Size 28 3/4 X 15 3/4 ,Kitchen Sink Protector,Sink Bottom Grid Rear Hole,Sink Grid for Single Bowl Kitchen Sink

  • Sink Grate:Stainless Steel Construction and Rear Drain Hole Design..
  • Kitchen Sink Protector:Protective Rubber Feet and Bumpers to Protect the Sink Surface from Scratching..
  • Sink Bottom Grid:Drying Sink Rack for Glassware and Dinnerware..
  • Sink Grid:Measure the Length and Width Inside the Sink, from 1" High of the Sink Bottom..
Check Stock

MONSINTA Kitchen Sink Grid and Sink Protectors, Stainless Steel Sink Grids for Bottom of Kitchen Sink, 26' x 14' with Rear Drain for Single Sink Bowl

  • Stainless Steel Sink Grid Dimension: 26″ X 14 1/16″..
  • Sink Protector with Rear Drain Location..
  • Kitchen Sink Grate, Sink Grid, Stainless Steel Construction..
  • Sink Bottom Grid, Sink Grate as Drying Rack For Glassware and Crockery..
  • Sink Grids for Single Bowl Kitchen Sinks..
Check Stock

mDesign Modern Metal Wire Kitchen Sink Metal Dish Drying Rack/Mat - Steel Wire Grid Design - Allows Wine Glasses, Mugs, Bowls and Dishes to Drain in Sink - Graphite Gray

  • SINK & COUNTER PROTECTION: The wire sink mat grid protector keeps dishes and glassware raised off of the sink base, protecting kitchen sinks from scratches and damage.
  • This gridded drying rack also makes a great cooling rack - set on kitchen countertops, islands or next to oven to cool hot baked goods.
  • The protective mat is raised so counters are safe.
  • STAYS IN PLACE: Raised feet on the sink grid keep stemware, serving plates, bowls, cups, pots and pans, and flatware lifted off of sink surfaces so scratches and marring are a thing of the past.
  • Plastic grips on the bottom of the feet keep the grid from slipping and sliding around.
  • Perfect for kitchen sinks in homes, apartments, condos, college dorm rooms, RVs and campers.
  • IMPROVED DRAINAGE: Gridded wire design lets water flow through easily, allowing dishes to air dry quickly.
  • This sink grid also makes a great drying rack for vegetables, fruit and other produce - rinse in the sink and allow to dry on this raised grid.
  • Air can flow easily around the open design.
  • QUALITY CONSTRUCTION: Made of strong steel wire with a durable rust-resistant finish.
  • Plastic feet to secure grid and keep sinks scratch free.
  • Easy Care - Clean with mild soap and water.
  • THOUGHTFULLY SIZED: Measures 11" x 12.75" x ....
Check Stock

mDesign Modern Metal Wire Kitchen Sink Metal Dish Drying Rack/Mat - Steel Wire Grid Design - Allows Wine Glasses, Mugs, Bowls and Dishes to Drain in Sink - 2 Pack - Copper

  • SINK & COUNTER PROTECTION: The wire sink mat grid protector keeps dishes and glassware raised off of the sink base, protecting kitchen sinks from scratches and damage.
  • This gridded drying rack also makes a great cooling rack - set on kitchen countertops, islands or next to oven to cool hot baked goods.
  • The protective mat is raised so counters are safe.
  • STAYS IN PLACE: Raised feet on the sink grid keep stemware, serving plates, bowls, cups, pots and pans, and flatware lifted off of sink surfaces so scratches and marring are a thing of the past.
  • Plastic grips on the bottom of the feet keep the grid from slipping and sliding around.
  • Perfect for kitchen sinks in homes, apartments, condos, college dorm rooms, RVs and campers.
  • IMPROVED DRAINAGE: Gridded wire design lets water flow through easily, allowing dishes to air dry quickly.
  • This sink grid also makes a great drying rack for vegetables, fruit and other produce - rinse in the sink and allow to dry on this raised grid.
  • Air can flow easily around the open design.
  • QUALITY CONSTRUCTION: Made of strong steel wire with a durable rust-resistant finish.
  • Plastic feet to secure grid and keep sinks scratch free.
  • Easy Care - Clean with mild soap and water.
Check Stock