Reviews Single stage Pressure Regulator

Propane Regulator, High Pressure, Adjustable 0-60 lbs

  • MEGR-1122H-AAJ High Pressure 10 PSI First Stage Regulator (1/4" Inlet x 1/2" Outlet) 1,000,000 BTU Capacity.
  • MEGR-1652-CFF Low Pressure 11" Water Column Backmount 90 Degree Second Stage Regulator (1/2" Inlet x 3/4" Outlet) 1,000,000 BTU Capacity.
  • POL x 1/4" Pigtail to connect between the propane tank and the first stage high pressure regulator.
Check Stock

Vertical Two Stage Propane Regulator with POL and Gauge, 2 Stage Propane Regulator Standard 3/8 Female NPT Connection, Double Stage Regulator for 20-100lb Tank，Gas Grill, RV, Propane Heater…

  • 【Two Stage Propane Regulator】Double propane regulator is newly upgraded. 2 stage regulator ensures that the inlet pressure of propane flowing to the first stage and the second stage is consistent. Dual propane pressure gauge can detect leakage and read the propane oil level and confirm again that there is no propane leaked, safer to use.
  • 【Inlet and Outlet】2 Stage Propane Regulator Inlet: Standard POL Tank Link.
  • Outlet has an Internal 3/8" female NPT, Maximum BTU 16,000 BTU/Hr Capacity.
  • 【Widely Application】2 Stage Propane Regulator is made of 100% solid brass to provide secure and sealed connection between application equipment and propane tank and solved the problem of gas leakage.Dual propane regulator with Gauge for gas grills, RVs, generators, stoves, heating boilers, burners, gas generators, gas stoves, propane fireplaces, water heaters, etc..
  • 【Easy to Install】Two Stage Propane regulator can be connected to the tank without tools.Standard P.O.L. tank connection for propane regulator with overcurrent protection, and it will automatically shut down if the operation error causes danger to ensure safety and durability. Perfect for family BBQ or outdoor travel, easy to disassemble, easy to move, easy to place.
Check Stock

Marshall Excelsior MEGR-6120-30 High Pressure Reg Bulk High Cap

  • MEGR-1122H-AAJ High Pressure 10 PSI First Stage Regulator (1/4" Inlet x 1/2" Outlet) 1,000,000 BTU Capacity.
  • MEGR-1652-CFF Low Pressure 11" Water Column Backmount 90 Degree Second Stage Regulator (1/2" Inlet x 3/4" Outlet) 1,000,000 BTU Capacity.
  • POL x 1/4" Pigtail to connect between the propane tank and the first stage high pressure regulator.
Check Stock

CGA580 Argon CO2 Regulators Argon Gauges Gas Welding Regulator Compatible with Mig Tig Miller Lincoln Weld 0-4500PSI / 0-10BAR - CO2 Argon Regulator with 6.6Ft Hose

  • Universal Gas Welding Regulator - This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet). Argon gauge 0 to 4500 PSI, argon gauge regulator provides accurate regulation of gas flow. This Gas Hose Is Ideal For Fitting Mig And Tig Welding. Ideal for commercial, industrial and laboratory applications.
  • 100% Brand New Argon Regulator with Hose - The CO2 regulator body is made of brass, Single-stage regulator, built-in pressure overload automatic degassing device. Large T-shaped adjustment handle, easy to adjust the pressure by hand. The flow tube is made of polycarbonate.
  • Accurate Argon Regulator with Pressure Gauge - CGA580 fitting (15/16" Male Thread), 9/16" male thread, 5/8" female thread. Argon gas meter measuring range: 0 to 4500 PSI. Argon CO2 Regulators Gauges Gas Welding Regulator With 6.6Ft Gas Hose. 6.6Ft Hose Quick Connect Fitting enable your tanks at a safe distance from your welding projects.
  • Reliable CGA580 Argon CO2 Regulator - The Argon CO2 flowmeter regulator has a plastic adjustment knob that allows for smooth "light touch" flow settings and has an internal safety relief design, Provides a safe environment for car driving. CO2 regulator with 2" dual gauges that will be easy to read.
Check Stock

SUPER HEAVY DUTY HIGH FLOW AIR FILTRATION SYSTEM, 2 STAGE PARTICULATE FILTER PLUS OIL REMOVING COALESCING FILTER COMBINATION (1" NPT, AUTO DRAIN)

  • 1" NPT, HEAVY DUTY INDUSTRIAL GRADE AIR FILTRATION AND IN-LINE AIR DRYER COMBINATION WITH PRESSURE REGULATOR. WITH INTERNAL FLOAT DRAIN (AUTO DRAIN) STAGE 1..
  • 175 PSI MAX INPUT PRESSURE, EQUIPPED WITH 11oz METAL BOWLS, VISIBLE SIGHT GLASSES, PRESSURE GAUGE, WALL MOUNTING BRACKET AND 4 BAGS OF DESICCANT BEADS.
  • STAGE 1: PARTICULATE FILTER/WATER TRAP WITH PRESSURE REGULATOR. 5 MICRON ELEMENT REMOVES 95% OF MOISTURE AND DEBRIS, REGULATOR WILL ADJUST PRESSURE FROM 7 TO 175 PSI.
  • STAGE 2: COALESCING / OIL REMOVING FILTER, EQUIPPED WITH 0.01 MICRON ELEMENT WILL REMOVE 99.98% OF MOISTURE, MOISTURE VAPOR AND OIL THAT MADE ITS WAY PAST STAGE 1..
  • STAGE 3: IN-LINE DESICCANT AIR DRYER WILL DRY OUT THE OUTGOING COMPRESSED AIR LINES BEFORE REACHING YOUR PNEUMATIC TOOLS, BEADS TURN FROM BLUE TO PINK WHEN TIME TO CHANGE..
Check Stock

3/4 NPT SUPER DUTY Industrial Grade 4 Stages Filter Coalescing Desiccant Dryer Regulator System For Compressed Air Lines Metal Bowls Great For Paint Spray And Plasma Cutter AUTO DRAIN

  • PLEASE NOTE: 3/4" NPT MEASURES 1.050" OUTSIDE THREAD DIAMETER IN INCHES. 3/4" NPT, Industrial Rated 4 Stage Combo Water Filter/ Coalescing Filter/ Desiccant Dryer/ Pressure Regulator System, With Wall Mounting Bracket And Internal Float Drain (AUTO DRAIN) STAGE 1.
  • 175 PSI Max Input. This Unit Will Removing Moisture Water, Moisture Vapor And Oil From Your Compressed Air Lines, Drying Out The Super Clean Air With An In-Line Desiccant Air Dryer, Then Finally Regulator Your Outgoing Air Pressure.
  • STAGE 1: Water Trap Filter. Equipped With 5 Micron Element To Remove 95% Of The Initial Moisture And Debris From Your Compressed Air Line. 11oz Metal Bowl With Visible Sight Glass..
  • STAGE 2: Coalescing Filter Also Known As Oil Removing Filter Armed With A 0.01 Micron Element That Removes 99.98% Of Moisture, Moisture Vapor And Oil That Made Its Way Past Your Stage 1 Filter. 11oz Metal Bowl With Visible Sight Glass..
  • STAGE 3: Desiccant Air Dryer, Dries Out Your Super Clean Air Before Going Downstream To Your Air Tools. Uses 11oz Desiccant Beads In The Bowl. Beads Turn From Blue To Pink When Time To Change. Unit Comes With 4 Bags Desiccant Beads. STAGE4: Pressure Regulator, Regulator Adjusts Output Pressure From 7 To 175 PSI..
Check Stock

1 NPT SUPER DUTY Industrial Grade Filter Regulator Coalescing Desiccant Dryer System For Compressed Air Lines Metal Bowls Great For Paint Spray And Plasma Cutter AUTO DRAIN

  • PLEASE NOTE: 1" NPT MEASURES 1.315" OUTSIDE THREAD DIAMETER IN INCHES. 1" NPT, Industrial Rated 3 Stage Combo Water Filter/ Pressure Regulator/ Coalescing Filter/ Desiccant Dryer System, With Wall Mounting Bracket And Internal Float Drain (AUTO DRAIN) STAGE 1.
  • 175 PSI Max Input. This Unit Will Regulator Your Incoming And Outgoing Air Pressure While Removing Moisture Water, Moisture Vapor And Oil From Your Compressed Air Lines, Then Finally Drying Out The Super Clean Air With An In-Line Desiccant Air Dryer.
  • STAGE 1: Water Trap Filter / Pressure Regulator. Equipped With 5 Micron Element To Remove 95% Of The Initial Moisture And Debris From Your Compressed Air Line. Regulator Adjusts Pressure From 7 To 175 PSI. 11oz Metal Bowl With Visible Sight Glass..
  • STAGE 2: Coalescing Filter Also Known As Oil Removing Filter Armed With A 0.01 Micron Element That Removes 99.98% Of Moisture, Moisture Vapor And Oil That Made Its Way Past Your Stage 1 Filter. 11oz Metal Bowl With Visible Sight Glass..
  • STAGE 3: Desiccant Air Dryer, Dries Out Your Super Clean Air Before Going Downstream To Your Air Tools. Uses 11oz Desiccant Beads In The Bowl. Beads Turn From Blue To Pink When Time To Change. Unit Comes With 4 Bags Desiccant Beads..
Check Stock

1/2 NPT MID FLOW Filter Regulator Coalescing Desiccant Dryer System For Compressed Air Lines Poly Bowls Great For Paint Spray And Plasma Cutter MANUAL DRAIN

  • PLEASE NOTE: 1/2" NPT MEASURES 0.850" OUTSIDE THREAD DIAMETER IN INCHES. 1/2" NPT, Industrial Rated 3 Stage Combo Water Filter/ Pressure Regulator/ Coalescing Filter/ Desiccant Dryer System, With Wall Mounting Bracket And Internal Float Drain (MANUAL DRAIN) STAGE 1.
  • 150 PSI Max Input. This Unit Will Regulator Your Incoming And Outgoing Air Pressure While Removing Moisture Water, Moisture Vapor And Oil From Your Compressed Air Lines, Then Finally Drying Out The Super Clean Air With An In-Line Desiccant Air Dryer.
  • STAGE 1: Water Trap Filter / Pressure Regulator. Equipped With 5 Micron Element To Remove 95% Of The Initial Moisture And Debris From Your Compressed Air Line. Regulator Adjusts Pressure From 7 To 150 PSI. 5oz Poly Bowl With Visible Sight Glass..
  • STAGE 2: Coalescing Filter Also Known As Oil Removing Filter Armed With A 0.01 Micron Element That Removes 99.98% Of Moisture, Moisture Vapor And Oil That Made Its Way Past Your Stage 1 Filter. 5oz Poly Bowl With Visible Sight Glass. Red Indicator Pops Up When Time For Filter Change..
  • STAGE 3: Desiccant Air Dryer, Dries Out Your Super Clean Air Before Going Downstream To Your Air Tools. Uses 5oz Desiccant Beads In The Bowl. Beads Turn From Blue To Pink When Time To Change. Unit Comes With 2 Bags Desiccan....
Check Stock

3 STAGE, HEAVY DUTY INDUSTRIAL GRADE FILTER REGULATOR COALESCING DESICCANT DRYER SYSTEM FOR COMPRESSED AIR LINES, METAL BOWLS, GREAT FOR PAINT SPRAY AND PLASMA CUTTER (1/2\ NPT, MANUAL DRAIN)

  • 1/2" NPT, INDUSTRIAL RATED 3 STAGE COMBO WATER FILTER/ PRESSURE REGULATOR/ COALESCING FILTER/ DESICCANT DRYER SYSTEM, WITH WALL MOUNTING BRACKET AND MANUAL DRAIN STAGE 1.
  • 225 PSI MAX INPUT. THIS UNIT WILL REGULATOR YOUR INCOMING AND OUTGOING AIR PRESSURE WHILE REMOVING MOISTURE WATER, MOISTURE VAPOR AND OIL FROM YOUR COMPRESSED AIR LINES, THEN FINALLY DRYING OUT THE SUPER CLEAN AIR WITH AN IN-LINE DESICCANT AIR DRYER.
  • STAGE 1: WATER TRAP FILTER / PRESSURE REGULATOR. EQUIPPED WITH 5 MICRON ELEMENT TO REMOVE 95% OF THE INITIAL MOISTURE AND DEBRIS FROM YOUR COMPRESSED AIR LINE. REGULATOR ADJUSTS PRESSURE FROM 7 TO 215 PSI. 5oz METAL BOWL WITH VISIBLE SIGHT GLASS..
  • STAGE 2: COALESCING FILTER ALSO KNOWN AS OIL REMOVING FILTER ARMED WITH A 0.01 MICRON ELEMENT THAT REMOVES 99.98% OF MOISTURE, MOISTURE VAPOR AND OIL THAT MADE ITS WAY PAST YOUR STAGE 1 FILTER. 5oz METAL BOWL WITH VISIBLE SIGHT GLASS. RED INDICATOR POPS UP WHEN TIME FOR FILTER CHANGE..
  • STAGE 3: DESICCANT AIR DRYER, DRIES OUT YOUR SUPER CLEAN AIR BEFORE GOING DOWNSTREAM TO YOUR AIR TOOLS. USES 5oz DESICCANT BEADS IN THE BOWL. BEADS TURN FROM BLUE TO PINK WHEN TIME TO CHANGE. COMES WITH 2 BAGS OF DESICCANT BEADS..
Check Stock

3 STAGE HEAVY DUTY INDUSTRIAL GRADE FILTER REGULATOR COALESCING DESICCANT DRYER SYSTEM FOR COMPRESSED AIR LINES METAL BOWLS GREAT FOR PAINT SPRAY AND PLASMA CUTTER 1/2 NPT AUTO DRAIN

  • 1/2" NPT, INDUSTRIAL RATED 3 STAGE COMBO WATER FILTER/ PRESSURE REGULATOR/ COALESCING FILTER/ DESICCANT DRYER SYSTEM, WITH WALL MOUNTING BRACKET AND INTERNAL FLOAT DRAIN (AUTO DRAIN) STAGE 1.
  • 175 PSI MAX INPUT. THIS UNIT WILL REGULATOR YOUR INCOMING AND OUTGOING AIR PRESSURE WHILE REMOVING MOISTURE WATER, MOISTURE VAPOR AND OIL FROM YOUR COMPRESSED AIR LINES, THEN FINALLY DRYING OUT THE SUPER CLEAN AIR WITH AN IN-LINE DESICCANT AIR DRYER.
  • STAGE 1: WATER TRAP FILTER / PRESSURE REGULATOR. EQUIPPED WITH 5 MICRON ELEMENT TO REMOVE 95% OF THE INITIAL MOISTURE AND DEBRIS FROM YOUR COMPRESSED AIR LINE. REGULATOR ADJUSTS PRESSURE FROM 7 TO 175 PSI. 5oz METAL BOWL WITH VISIBLE SIGHT GLASS..
  • STAGE 2: COALESCING FILTER ALSO KNOWN AS OIL REMOVING FILTER ARMED WITH A 0.01 MICRON ELEMENT THAT REMOVES 99.98% OF MOISTURE, MOISTURE VAPOR AND OIL THAT MADE ITS WAY PAST YOUR STAGE 1 FILTER. 5oz METAL BOWL WITH VISIBLE SIGHT GLASS. RED INDICATOR POPS UP WHEN TIME FOR FILTER CHANGE..
  • STAGE 3: DESICCANT AIR DRYER, DRIES OUT YOUR SUPER CLEAN AIR BEFORE GOING DOWNSTREAM TO YOUR AIR TOOLS. USES 5oz DESICCANT BEADS IN THE BOWL. BEADS TURN FROM BLUE TO PINK WHEN TIME TO CHANGE. UNIT COMES WITH 2 BAGS DESICCANT BEADS..
Check Stock