Reviews Single screw
Culligan UB-1 Mounting Bracket with Screws
- Mounting bracket for Culligan Whole House Sediment Water Filter HF-360 (1653-3325).
- The Culligan UB-1 single housing bracket is a “U” shaped mounting bracket for 3/4″ inlet/outlet standard whole house housings..
- The UB-1 mounts standard whole house water filter housings and helps support the weight of the water filter..
- Screws are included with the UB-1 mounting bracket for securing the water filter housing to the wall. The screws are No.10 1-1/2″ pan head screws..
Check StockIgloo Set of 2 Cooler Latch Posts & Screws (Part #24013)
- Genuine Igloo parts. Igloo Part # 24013. Features Igloo logo on latch front..
- Made by Igloo. Includes 2 Igloo latches (each latch comes with a single-screw button post pre-snapped in) and 6 stainless steel screws..
- Fits Igloo 50-165 Qt coolers with latches that secure with a single-screw button / post..
- Latch rests close to cooler when unlatched in order to minimize breakage. Integrated parts and guided locator post provide easy assembly..
- Beveled latch edge deflects impact, reducing chance of breakage..
Check StockIgloo Cooler Stainless Steel Latch and Hinge Parts Kit
- Made by Igloo. Kit includes: 2 stainless steel latches, 3 stainless steel hinges, 2 single screw attachment posts, and 18 screws (stainless steel,....
- Latch fits most Igloo Ice Chests 50-165 Quart Coolers with latches that secure with a single-screw button post. Features Igloo logo on latch front..
- Stainless steel construction is rust-resistant and durable (long-lasting)..
- Please see installation diagram in fourth photo for proper installation. When attaching the latch to the cooler, turn the latch upside down with the....
Check StockIgloo Cooler Latch and Hinge Plastic Parts Kit
- Made by Igloo. Kit includes: 2 plastic latches (each latch comes with a single-screw button post pre-snapped in), 3 plastic hinges, 18 screws (stainless steel, hi-low thread)..
- Latch fits most Igloo Ice Chests 50-165 Quart Coolers with latches that secure with a single-screw button post. Features Igloo logo on latch front..
- Igloo cooler parts contain UV inhibitors to protect against sun damage and breakdown, and are rugged and durable for a long cooler life..
Check StockKICKER 43CVR152 COMPVR 15" 1000 Watt Car Subwoofer+Sealed Sub Box Enclosure
- Package Includes: (1) Kicker 15" Car Audio Subwoofer. (1) RockvilIe Single 15" Sealed Car Sub Enclosure Box 2.03 Cu Ft. 10 Drywall Wood Screws (Wood screws are the type of screws.
- the screws are actually made of metal). 12 Feet of 14 AWG Blue Speaker Wire. 2 Spade Terminals. Features/Specifications: Kicker 43CVR152 15" 1000 Watt Dual Voice Coil 2-Ohm Car Audio Subwoofer. Power Handling: Peak :1000 watts. RMS :500 watts. Size :15". Injection molded SoloKon cone. Ribbed Santoprene Surround.
- Perimeter Venting. Spiralead tinsel-lead technology. UniPlate system redirects heat away from motor structure. Stamped Steel Basket. Spring-loaded Push Terminals. Dual 2-Ohm high-temperature voice coils. Top-mount depth : 8-3/16". Mounting Diameter : 13-11/16". Sensitivity : 89.2dB @ 1w/1m. Frequency Response : 25-500Hz. Minimum Sealed Enclosure : 1.8 cu. ft. Maximum Sealed Enclosure : 5.2 cu. ft. Minimum Ported Enclosure : 3 cu. ft. Maximum Ported Enclosure : 5 cu. ft.
- Subwoofer Design : Round / Circle. Main Cone Color : Dark Gray. Woofer Composition : SoloKn. Woofer Surround : Santoprene Rubber. Weather resistant - Suitable for marine use in additional to car applications. We can ship Kicker products to the 48 continental United States. Features: RockvilIe RGS15 Sin....
Check StockFerraycle 6 Pieces Surfing Accessories No Tool Stainless Steel Fin Screw Thumb Fin Screw for Men Women Surfboard Surf Longboard Paddleboard and SUP
- Package contents: the package comes with 6 pieces of fin screws and plates, which can meet your demands of application and replacement daily life as....
- Reliable material: these no tool fin screws are made of a quality material called 316 stainless steel, solid and stable, not easy to broken, deform or....
- Portable and lightweight: the stainless steel fin screws are compact in size so that they are easy to store and will not take up so much space as well....
- Simple to operate: this thumb fin screw is easy to install, you don't need other tools, suitable and friendly for beginners and those who like....
- Applicable occasions: our 316 stainless steel fin screw and plate are suitable for many types of surfboard, such as long board, single board, single....
Check StockKICKER 45L7R122 12' 1200 Watt L7R Subwoofer, Solo-Baric+Vented Sub Box Enclosure
- Package Includes: (1) Kicker 12" Car Subwoofer. (1) RockvilIe Single 12 MDF Vented Square Solo Baric L7/L5/L3 Enclosure Box. 10 Drywall Wood Screws (Wood screws are the type of screws.
- the screws are actually made of metal). 12 Feet of 14 AWG Blue Speaker Wire. 2 Spade Terminals. What's In The Box: (1) 12" Subwoofer. (1) Owner's Manual. (2) Kicker Stickers. Features: KICKER 45L7R122 12" 1200 Watt L7R Car Subwoofer, Solo-Baric 2-Ohm. RMS Power Handling: 600 Watts.
- Peak Power Handling: 1200 Watts. Frequency Response: 35 Hz - 21 kHz. Dual Two-Ohm Voice Coil. Wrap Around Gasketing. Patented Ribbed Corners. Injection-Molded SoloKon Woofer. 360-Degree Back Bracing. UniPlate Back Plate And Pole Piece. Bumped Back Plate. Thick Tinsel Leads. Large Ceramic Magnet. Steel Basket With Spoke Design. Nickel Plated Speaker Terminals. Sensitivity: 86.7 dB. Impedance: 2-Ohms. Mounting Depth: 6.88" inches. Mounting Diameter: 11.06" inches.
- Minimum Sealed Box Volume: 0.88 cubic feet. Maximum Sealed Box Volume: 2.0 cubic feet. Minimum Vented Box Volume: 1.75 cubic feet. Maximum Vented Box Volume: 3.25 cubic feet. Features: RockvilIe RSVK12 Single 12" Vented Square Subwoofer Enclosure. Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of ....
Check StockCorner Brace Alamic Right Angle Bracket Stainless Steel Black Corner Braces Joint Right Angle Bracket Shelf Bracket with Screws 20 x 20mm - 12 Pcs
- Double Screw Holes Design: 2 countersink holes on each side for fixing and stabilizing , firmer than single screw hole L bracket, can stand a heavier load with no deform.
- Larger Bracket: the length of each side(1.57*1.57inch) doubles single bracket’s side(0.79*0.79 inch). With wider applications, the corner brace not only can be used for reinforcing small furniture, like cabinet, drawers,but also can be used for large one , like wooden bed,cupboard, tables,shelves, and other wood DIY projects.
- Stainless Steel Made: rust-resistant and sturdier, brushed finish, perfect 90 smooth edges (no razor edge!) . Countersink mounting holes ensure the screws not stand out, give your furniture an aesthetic look.
- Easy to Install: package includes metal screws, no more buy extra screw, very convenient for you to use, no fear of falling apart.
- Affordable and Valuable Package: includes 16 x Angle Brackets(40 x 40 x 16 mm) , 64 x screws, come with a film on them to keep from getting scratched during shipping.
Check StockCable Matters 10-Pack Single-Gang Toggle Switch Wall Plate (Wall Switch Cover) in White
- 1 gang toggle switch wall plate cover provides a new or replacement toggle switch cover in the home or office.
- Single light switch toggle wall plate provides a professional-looking installation.
- Contemporary design of this toggle faceplate cover provides a clean look for an upgrade in the kitchen, dining room, or living room.
- Smooth finish on the wallplates is easy to clean and includes matching painted screws.
- Sturdy single gang toggle light switch plate covers fit a standard-sized single-gang receptacle.
- Toggle light switch cover installs easily with the included mounting screws.
- Cost effective 10 pack of light plate covers which provides enough faceplate covers for a small renovation project at home or work.
- Toggle switch compatible to pair with a single pole toggle light switch in a standard-sized outlet box.
Check StockViewer Questions: Fuel System Requirements When Converting From Gas to Diesel
- 【Accurate Fuel Injection】Air-cooled diesel engine four-stroke single cylinder adopts direct injection fuel system with good atomization to achieve accurate fuel injection and save fuel for you. Commodity parameters:Crankshaft: Horizontal,Size: 13.2 * 14.96 * 16.3 inches,Net weight : 59.5 lb,Material: aluminum alloy box,System: direct injection fuel system,Rated power: 3.6kw,Displacement (L): 0.247,Fuel tank volume (L): 2.5,Engine speed: 3600r / min..
- 【Speed Control Handle】Diesel motor engine can be positioned at any speed, equipped with throttle cable mount, you can install the throttle cable as needed..
- 【Fast Heat Dissipation】4 Stroke single cylinder air cooled vertical engine has an air-cooled diesel engine made of aluminum alloy with reinforced and thickened treatment, which makes it have good heat dissipation and protect the machine..
- 【Small Space Occupation】Tiller crude oil engine has compact structure and small size, occupying less space than other engines..
- 【Wide Range of Application】Heavy duty single cylinder air- cooled diesel motor engine is suitable f....
Check Stock