Reviews Single Phase Meter
Electric kWh Meter, 100A 120/240 Volt, 3-Wire, 60Hz
- ELECTRIC METER – State-of-the-art, fully solid-state kWh meter with 800 pulse per kWh pulse output..
- SINGLE PHASE – Up to 100 amps, 120/240-volt, 3-wire, 60Hz..
- ACCURATE – 1% accuracy class, LCD readout in hundredths of a kWh, to 99999.99 kWh..
- COMPACT – Simple DIN-rail mounting designed for symmetrical load..
- LCD DISPLAY – Non-resettable LCD display. Usage data is maintained through power outages..
Check StockExtech PQ2071 True RMS 1/3 Phase 1000A AC Power Clamp Meter
- Meter operates as a True RMS Clamp Meter, Power Meter, Multimeter, and AC Voltage Detector.
- Measures AC Current, Voltage, Frequency and Power including True Power, Apparent Power, Reactive Power and Active Power.
- Measures 1-Phase/ balanced 3-Phase True Power (kW), Apparent Power (kVA), Reactive Power (kVAR) and Active Power (kWh),plus Power Factor/ Phase Angle.
- Large dual backlit LCD display (9999 count) with bargraph.
Check StockBaomain DDS238-4 (30-100)Single Phase DIN-Rail Kilowatt Hour kwh Meter 220V 100A
- Rate Voltage:220V 230V 240V Rate Current:30(100A).
- 220V Single Phase DIN-rail Kilowatt Hour kwh Meter.
- Insulation Performance:AC voltage 2KV for 1 minute,impulse voltage 6KV.
- Accuracy Class:Class 1 Starting Current:0.4%lb.
- 35mm standard DIN rail installation,complying with standard DIN EN5002.
Check StockDC Motor Speed Controller AC 110V Input DC 24V-90V Output Motor Speed Controller Switch Electric Speed Regulator for Permanent Magnet DC Motor 400W DC-51
- High Precision:Motor speed controller 36V has small size, high precision, wide speed controlling range, low power consumption and long service life.
- Size: 11.2 × 10 × 6cm/4.4 × 3.9 × 2.3inch.
- Single Phase Controller:This DC motor speed controller 24V is only suitable for the motor below 1800rpm. A single-phase asynchronous motor speed controller and can be used for 24V, 36V, 90V DC motors. Input Voltage: AC 110V.
- Wide Application:Adjustable DC motor speed controller 90V can be widely used for speed governing device drivers of packaging, printing, electronics, instrument meter, clothing machinery, medical machinery and other industries.
- High Quality Circuit Board:This motor speed controller 24V uses high quality electronic circuit and integrated components, sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
- Fast To Respond:DC motor speed controller is used with single-phase asynchronous motor to realize feedback constant speed and stepless speed regulation. It feels smooth and has good durability.
Check StockSiemens MM0202B1200 200-Amp Meter Main Combination
Check StockY&H 1200W Solar Grid Tie Micro Inverter with AC Data Monitoring Display Screen Waterproof IP65 MPPT DC28-50V PV Input AC80-160V Output for 36V Solar Panel
- WVC series inverter Using IP65 waterproof streamline design which effectively prevent rainwater on the surface erosion. Microinverters turn the power from your solar panels into usable electricity. Single-phase microinverters are usually used in residential and small commercial environments(Support single-phase or three-phase connection).
- We have improved the AC wiring solution. Configure converters for faster installation. Avoid the risk of miswiring the fire, zero and ground wires.Meanwhile, the DC input is designed with MC4 connector to avoid reversing the positive and negative terminals. (Some customers extend the solar panel cable so that the positive and negative polarity is reversed).
- Grid Tie Inverter can monitor in real time the power generated by the inverter through the AC digital meter.(Voltage, current, active power, electrical energy, frequency, power factor)No fire risk and electric shock during installation and operation due to low DC voltage(up to 50V) compared with at least 200V from string inverters.
- Grid Tie Solar Inverter suitable for 4X250W-300W 36V solar panel (Vmp30-39V.
- Voc = open circuit voltage.Optimized for high powered 60-cell and 72-cell* modules.Each MC4 branch cannot exceed 300W.
Check StockUniversal Electric kWh Meter – Omnimeter I v.3
- Universal Smart Meter – Works on any electrical system up to 480V.
- Submeter Any Electrical Load and Read the Results Over the Web.
- 120 to 480 volts — 100 to 5,000 amps — 50 or 60Hz.
- 1-phase or 3-phase — Accurate to 0.5% — Wide Selection of CTs.
- The Best Communicating Smart Meter for the Lowest Price — CTs NOT Included in Price.
Check StockElectric Meter, KWh Meter, Single Phase 4P LED din Rail Electricity Power Consumption Wattmeter Energy Meter, 10-40A
- ...configuration pulse output is passive (polar) and the remote pulse output can be selected as passive (non-polar). KWH meter is easy to contact with various AMR systems and conforms to the standards IEC 62053-31 and DIN43864..
- 【One-way measurement】One-way measurement of single-phase two - wire active energy consumption. This has nothing to do with the direction of the load current. Comply with IEC 62053-21..
- 【Two Wiring Methods】The din rail energy meter has direct connection operation, two wiring methods. Standard configuration S type wiring, U type wiring can be selected. Extend the terminal cover to protect the use of the security..
Check StockGenerac 6852 Home Link Upgradeable Transfer Switch Kit, 30 Amp
- 100-Amp 120/240 volt single phase Smart transfer switch is housed in a Steel NEMA/UL type 3R enclosure.
- Transfer switch connects through the utility meter for easy installation.
- smaller fuses integrated into the control board.
- Heavy duty Generac contactor is a UL recognized Device designed for years of service.
- The controller at the generator handles all the timing, sensing, exercising functions and transfer commands.
- Can be used in Tandem with Generac's Smart Management modules, up to 8 more loads can be managed as well, providing the most installation efficient power Management options available.
Check StockJurassic World: The Boardgame
- Jurassic World is a cooperative board game from 2 to 6 players. It's a combination of making the right choices with your teammates and some luck with rolling the dice..
- Players start their turn together by placing their banners strategically in the preparation phase..
- In the action phase players take actions based on where they placed their banner in the previous phase..
- If something goes wrong and the 'danger meter' reaches 20, all players will lose the game..
- English Version | 2 to 4 Players | Ages 12+ | 45 to 90 Minute Playing Time.
Check Stock