Reviews Single Output Power Supply
Securitron AQU126 Power Supply, 6 Ampere/12V DC
- 300W high voltage power supply with single output, you can use it to generate the high voltage output..
- Application: High voltage electric field, clean air, clean smoke, electrostatic air cleaner etc..
- This high voltage power supply has shortcut protection and preventing spark-over protection..
Check StockVoltage Measurement Module, DVB01 Voltage Comparator for Voltage Measurement for Control Applications
- The LM2903P devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.
- Single-supply or dual supplies Wide range of supply voltage Maximum rating: 2 V to 36 V.
- Low supply-current independent of supply voltage: 200 µA per comparator, Output compatible with TTL, MOS, and CMOS.
- Common-mode input voltage range Includes Ground, Low output saturation voltage.
- Differential input voltage range equal to maximum-rated supply voltage: ±36 V.
Check StockComparator Dual177;18V/36V 8-Pin SO N T/R
- Wide range of supply voltage Maximum rating: 2 V to 36 V, Low input bias current, Low output saturation voltage.
- Low supply-current independent of supply voltage: 200 µA per comparator, Low input offset voltage.
- Common-mode input voltage range Includes Ground, Output compatible with TTL, MOS, and CMOS.
- Differential input voltage range equal to maximum-rated supply voltage: ±36 V, Example Applications: Vacuum robot, Single phase UPS, Server PSU, Cordless power tool, Wireless Infrastructure, Appliances, Building Automation, Factory automation & control, Motor drives, Infotainment & cluster.
Check StockJuried Engineering LM393P LM393 IC Dual Differential Comparator & 8-Pin DIP Sockets with Machined Contact Pins Breadboard-Friendly (Pack of 10)
- Four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.
- Wide Supply Ranges Single Supply: 2 V to 36 V, Dual Supplies: ±1 V to ±18 V, Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: ±36 V, Low Input Offset Current: 3 nA (Typical).
- Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA (Typical), Low Output Saturation Voltage, Common-Mode Input Voltage Range Includes Ground.
- Low Input Bias Current: 25 nA (Typical), Low Input Offset Voltage: 2 mV (Typical), Low Output Saturation Voltage.
- Example Applications: Industrial, Automotive: Infotainment and Clusters, Body Control Modules, Power Supervision, Oscillators, Peak Detectors, Logic, Voltage Translation.
Check StockTPA3116D2 100W Mono Amplifier Board Subwoofer Amplifier Board Module with NE5532 OPAMP Mono High Power Subwoofer Audio Stereo AMP Digital Power
- Quality power amplifier chip, DC single power supply 8-25V working voltage, 50W (left channel) and 50W (right channel), two of channel output..
- Can use switching power supply, laptop switching power supply, battery or car power supply, etc..
- Adopt NE5532 front-facing OPAMP to buffer, better than normal amplifier..
- efficiency up to 90 percent. 100W mono subwoofer, outstanding effect..
Check StockTexas Instruments LM311P LM311 Differential Comparator With Strobes DIP8 5 Pack
- Wide range of supply voltage Maximum rating: 2 V to 36 V, Low input bias current, Low output saturation voltage.
- Low supply-current independent of supply voltage: 200 µA per comparator, Low input offset voltage.
- Common-mode input voltage range Includes Ground, Output compatible with TTL, MOS, and CMOS.
- Differential input voltage range equal to maximum-rated supply voltage: ±36 V, Example Applications: Vacuum robot, Single phase UPS, Server PSU, Cordless power tool, Wireless Infrastructure, Appliances, Building Automation, Factory automation & control, Motor drives, Infotainment & cluster.
Check StockJuried Engineering LM2903P LM2903 Dual Differential Comparator Automotive Grade Breadboard-Friendly IC DIP-8 (1 Piece)
- The LM2903P devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.
- Single-supply or dual supplies Wide range of supply voltage Maximum rating: 2 V to 36 V.
- Low supply-current independent of supply voltage: 200 µA per comparator, Output compatible with TTL, MOS, and CMOS.
- Common-mode input voltage range Includes Ground, Low output saturation voltage.
- Differential input voltage range equal to maximum-rated supply voltage: ±36 V.
Check StockTaidacent AD620 High Accuracy Low Cost Low Power Instrumentation Amplifier Voltage Amplifier Module Differential Amplifier Single-Ended/Differential Small Signal
- Power supply: 5V-24V can be, but depends on how much the baby with the voltage output (if the customer requires output 5V voltage, then the AD62X series of chips is about ± 3.8V power supply, the regulator chip itself has a pressure difference, so it is recommended that the voltage is higher than 12V single Power supply is better).
- Bandwidth: AD620/623 is lower than 50KHz at high gain and greater than 1MHz at low gain Input signal type: single-ended signal or differential signal.
- The maximum magnification: more than 2000 times (actual measurement), due to the gain assembly resulting in greater fluctuations in the waveform band, it is recommended to use high-gain multi-stage amplification.
- Saturation output amplitude: AC peak 10Vpp (±5Vpp).
- This module can be enlarged 1000 times, the circuit layout is regular, MINI, design layout and wiring are reasonable.
Check StockFrequency Converter AD831 Single Chip High Frequency RF Mixer Radio Frequency Conversion Module for HF and VHF Receiver, 0.1-500MHz
- WITH VARIOUS PORTS-- There is no corresponding shielding and isolation problems, therefore, compared with the passive mixer to improve the performance of the system, reduce the system cost. The mixer is designed as a single power supply, RF, IF and LO ports with DC isolation capacitor, easy to use..
- POWERFUL-- The operating frequency of the RF and LO inputs can be as high as 500MHz. IF output is single ended voltage output. With 250 MHz output bandwidth. A single resistor connected between pins OUT and FB is used to set the gain..
- EASY TO USE-- When the mixer's output amplifier and the optimum source impedance, the SSB noise figure of the mixer is 10.3dB at 70MHz. Different from the passive mixer, there is no insertion loss, no need external duplex device, and no need passive termination for AD831..
- APPLICATION-- The AD831 is a low distortion, wide dynamic range, single chip mixer, suitable for HF and VHF Receiver RF-IF frequency, second mixer in DMR base sta....
Check StockART 351 EQ 31-Band 1/3 Octave Graphic Equalizer
- The 351 is a single-channel, 31-band, 1/3-octave graphic equalizer with many features: constant Q circuitry with a 3% center frequency accuracy, 20mm center detent sliders, selectable boost/cut range of 6dB or 12dB, active balanced and unbalanced input and output connections, adjustable high-pass filter, adjustable low-pass filter, variable input level control, clip level indicators, ground lift switch, internal power supply, and selectable line voltage switch.
- The ART 351 Single Channel 31-Band Equalizer features a rugged all-steel chassis that occupies a single 19" rackspace.
Check Stock