Reviews Single Lock Hose

Dometic SeaStar Pro Hydraulic Steering Kit, HK7500A-3

  • Hydraulic Steering Kit without hoses (ordered separately HO51xx where xx equals hose length in feet) for non-aggressively driven single outboard powered boats that do not exceed 75mph.
  • Updated system includes O-ring boss rotational fittings for easy hose routing and new end gland sealing system for maximum protection from saltwater and compression set.
  • Five turns lock-to-lock with 1.7 cu.in. helm (included) for maximum steering comfort.
  • Robust Barrel Design and NEW Graphics compliment new boats and motor packages.
  • Not recommended for boats that exceed 75mph or run surface piercing props or the power exceeds the maximum Coast Guard rating for the vessel.
Check Stock

Ear Hose Clamp, BAILUK 120Pcs 8 Sizes 304 Stainless Steel Single Ear Hose Clamps, 1/4 inch - 53/64 inch Crimp Hose Clamp Assortment Kit Ear Stepless Cinch Rings(Single Ear Hose Clamps Kit)

  • [Hose Clamp Sizes] This single ear hose clamp set covers inner diameter range of 6-21mm (7common sizes): 6-7mm, 7-8.7mm, 8.8-10.5mm,10.3-12.8mm,12.8-15.3mm,15.3-18.5mm,17.8-21mm total 120pcs..
  • [High Quality] These hose clamps are made of high quality 304 stainless steel.They has good corrosion resistance, heat resistance, low-temperature strength, and mechanical properties. The solid and sturdy material let the hose clamps last longer time for use and will not rust and break. 360° seal protection, lock forces concentrated. Specially formed strip edges reduce the risk of damage to the part being clamped..
  • [Wide Application] These Single Ear clamps are widely used in all plumbing systems,such as securing hoses, the hose of the car, home appliance line, machinery equipment, pipe, cable, tube, fuel lines etc..
  • [Simple and Quick Installation and Easy to Store] Using the proper matching plier, these clamp can be equipped fast and will hold very well, which saves your time efficiently.
  • Multi size pack is handy to have for your projects & repairs. There are many kinds of hose clamps, you will get 120Pcs differnt sizes single hose clamp, packed in cylindrical jars , easy to reach the right size and store..
  • [100% SATISFACTION ASSURANCE] The size of the clamp deno....
Check Stock

Mophorn 150HP Hydraulic Outboard Steering Kit Boat Marine System

  • ... is equipped with quick-fit 1/4'' pipe fitting for easy and fast installation and multiple re-uses. Each hose is 20' long and can be cut for your specific installation, accommodating most boats..
  • Great Partner for Your Boat: Our hydraulic steering kit is for single-outboard powered boats rated up to 150 HP, including runabouts and inflatables — and outboard engines with ABYC standard engine tilt tubes up to 150 HP (total). For single station, single-engine use only..
Check Stock

ReelWorks Air Hose Reel Retractable 3/8 Inch x 80 Foot Max 300PSI Longest Ever Hybrid Polymer Hose Industrial Steel Construction

  • SPECIFICATIONS - This Hose Reel is constructed of heavy gauge industrial steel with: corrosion resistant powder coating, single adjustable guide arm &....
  • EFFICIENT DESIGN - This Hose Reel utilizes a fully enclosed multi-position release ratchet spring, to lock the hose at any desired length & stamped....
  • SAFETY & PROPER USE - Our Hose Reels are cull quality tested. Reelworks Reels are best suited for indoor/outdoor use, night or day environments, for....
Check Stock

ReelWorks Air Hose Reel 3/8\ Inch x 50' Foot Heavy Duty Industrial Max 300PSI Flex Hybrid Polymer Hose

  • This Hose Reel is constructed of heavy gauge industrial steel with corrosion resistant powder coating, single adjustable guide arm and L-Shaped base w/ groove reinforcement ensuring stable support.
  • a full flow solid swivel joint hose inlet connection protecting against leaks.
  • The Premium Commercial 3/8" inch x 50' foot Hybrid Flex Polymer Hose working pressure is 300PSI/20BAR w/ 1/4" inch MNPT connections.
  • Included: Adjustable Hose Stopper, 4 Non-Snag Rollers to reduce hose abrasion.
  • EFFICIENT DESIGN - This Hose Reel utilizes a fully enclosed multi-position release ratchet spring, to lock the hose at any desired length and stamped steel guide arm.
  • Premium Commercial Hybrid Flex Polymer Hose is a blend of Rubber/PVC giving superior bend radius, has no memory (eliminating kinks), lays flat, Resistant to: Water/Oil, Heat, Ozone, Weather Indoor/Outdoor, Abrasion and works in the toughest conditions of -40°F to 176°F (-40°C to 80°C), for the best advantage to suit your needs.
  • SAFETY and PROPER USE - Our Hose Reels are cull quality tested. ReelWorks Reels are best suited for indoor/outdoor use, night or day environments, for DIY or industrial applications, allowing for extension to be up out of the way keeping the workplace safe.
Check Stock

gazechimp Stainless Steel Outboard Steering Link Lever Tie Rod End Set for Marine Boat

  • Built and certified to meet safety & quality requirements established by the American Boat & Yacht Council (ABYC) and International Standards Organization (ISO).
  • Hydraulic Steering Kit without hoses (ordered separately HO51xx where xx equals hose length in feet) for non-aggressively driven single outboard powered boats that do not exceed 75mph.
  • Updated system includes O-ring boss rotational fittings for easy hose routing and new end gland sealing system for maximum protection from saltwater and compression set.
  • Five turns lock-to-lock with 1.7 cu.in. helm (included) for maximum steering comfort.
  • Robust Barrel Design and NEW Graphics compliment new boats and motor packages.
  • Not recommended for boats that exceed 75mph or run surface piercing props or the power exceeds the maximum Coast Guard rating for the vessel.
Check Stock

D-WEIXIN 2' × 50' Pool Backwash Hose, Heavy Duty Reinforced Blue PVC Lay Flat Water Discharge Hoses for Drain Pools and Clean Filters

  • The pool backwash hose is made of PVC and reinforced with polyester yarn, can withstand 90 psi working pressure during water supply and drainage, heavy-duty, superior strength, economical, durable, leak-free and weather, chemical and burst resistant..
  • Backwash hose is standard 2 inch hose, flat 3.4’’ wide, fit 2’’ standard size filter outlet or cam lock / pin lug fittings, and fit 1.5’’ or less size schedule 40/80 PVC pipe. Be sure to measure your filter outlet to ensure proper fit before ordering..
  • The discharge hose is essential swimming pool supplies, works as pool drain hose, pool pump hose, filter waste hose, also works for agricultural water discharge, irrigation, landscaping, construction dewatering and submersible pumping..
  • The pool hose is made to fit standard connections to backwash pool filtration systems , and you can easily install it with clamp. After use, just roll it up and hardly take up any space, and then store it in a dry place for next use, away from direct sunlight..
  • Unlike traditional paper-thin single layer hose, it can be used multiple times and withstand rough handling. If you want a drain hose that will last, this is what you are looking for!.
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • DISPENSE YOUR FAVORITE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
Check Stock

Motcoda Flexible Hose Clamp Pliers Tool 24\ Long Reach Locking Clamp Plier For Automotive Radiator Fuel Water 18mm-54mm Hose Clamps

  • 【Multi-Compatible with spring clamp tool】This radiator hose clamp pliers has a maximum opening of 1-1/2" and a long distance of 2 feet.
  • spring loaded hose clamp pliers have a removal diameter of 11/16" - 2-1/2" (18mm - 54 mm) plastic and/or metal self-tightening hose clamps.
  • a single hose clamp remover pliers becomes a versatile spring clamp removal tool.
  • 【Easy radiator clamp tool】This radiator hose clamp tool, just put the heavy duty hose clamp pliers on the cold cut pipe clamp switch with one hand, and compress the radiator hose clamps pliers with the other hand according to the size of your hose clamp , lock the spring band clamp pliers ratchet mechanism, it can be easily disassembled and installed.
Check Stock

DAVCO 2' x 100 ft Pool Backwash Hose, Heavy Duty Reinforced Blue PVC Lay Flat Water Discharge Pump Hoses For Swimming Drain Pools and Clean Filters,with 1 Clamp

  • The pool backwash hose is made of PVC and reinforced with polyester yarn, can withstand 90 psi working pressure during water supply and drainage, heavy-duty, superior strength, economical, durable, leak-free and weather, chemical, and burst resistant..
  • Backwash hose is standard 2 inch hose, flat 3.4’’ wide, fit 2’’ standard size filter outlet or cam lock / pin lug fittings, and fit 1.5’’ or less size schedule 40/80 PVC pipe. Be sure to measure your filter outlet to ensure proper fit before ordering..
  • The discharge hose is essential swimming pool supplies, works as pool drain hose, pool pump hose, filter waste hose, also works for agricultural water discharge, irrigation, landscaping, construction dewatering and submersible pumping..
  • The pool hose is made to fit standard connections to backwash pool filtration systems , and you can easily install it with clamp. After use, just roll it up and hardly take up any space, and then store it in a dry place for next use, away from direct sunlight..
  • Unlike traditional paper-thin single layer pool backwash hose, it can be used multiple times and withstand rough handling. If you want a drain hose that will last, this is what you are looking for!.
Check Stock