Reviews Signal System Interface Modules

Crimestopper SP-402 Car Alarm with Remote Start, Keyless Entry and Engine Disable,Black

  • 2 Sleek 5-button Transmitters With Brushed-aluminum Trim & Titanium Silver Button Finish.
  • Twin Data Ports To Accommodate Both Fortin & Ads Modules.
  • Audible & Visual Arm & Disarm With Intrusion Alert.
  • (2) new style, ultra sleek 5-button transmitters with brushed aluminum trim and titanium silver button finish.
  • audible and visual arm and disarm with intrusion alert.
  • (2) vehicle operation: remotes from one of this car alarm can securely control your second vehicle with this car alarm installed.
  • includes 25 Watts high-power single-tone siren and dual-stage shock sensor.
  • Can easily be switched from a 1-way to a 2-way system through optional purchase of antenna and 2-way remote pager.
Check Stock

AEDIKO 5pcs IPX IPEX U.FL to RP-SMA Female Pigtail Antenna Bulkhead Mount WiFi Cable 35cm for WiFi Router Network Card Adapter

  • Pigtail Antenna: Connector: RP-SMA Female Bulkhead Mount.
  • Function:To Maximize Signal Power, Ensure the Highest Quality of all Types of Connected Frequency Equipment, and also Eliminate the Attenuation of Signal Power.
  • Wireless Range: Antenna WiFi Cable for Intel 7260NGW 7265NGW 8260NGW 8265NGW 9260NGW NGFF Wireless Card & M.2 (NGFF) WiFi / WLAN / 3G / 4G / LTE Modules.
  • Wide Application: WiFi IP Security Camera.
  • Wireless Video Surveillance DVR Recorder.
  • Truck RV Van Trail Rear View Camera, Reverse Camera, Backup Camera, Industrial Router IoT Gateway Modem, M2M Terminal, Remote Monitoring and Control, Wireless Video, Wireless HDMI Extender etc..
  • Notice: This IPEX IPX U.FL Pigtail Cable Only Use for M.2 NGFF Interface Network Cards, Can NOT Fit Mini PCI-E Interface Network Cards, Please Check Your Network Cards Before Purchasing.
Check Stock

ALAMSCN LED Display Module TM1637 0.36'' 4-Digit 7 Segment 4 Bits Red Digital Tube for Arduino Driver Board (Pack of 4)

  • 4-digit LED display module, red highlights, with adjustable LED brightness and clock point, can display decimals, letters, etc..
  • The driver IC is TM1637, compatible with Arduino..
  • The digital display tube can be controlled with only two signal lines, simple and easy to use..
  • Control interface: a total of 4 pins (GND, VCC, DIO, CLK), GND to ground, VCC for the power supply, DIO for the data input and output pins, CLK for the clock signal pin..
  • 4 M2 screw holes, easy to install, locate and combine modules..
Check Stock

Sanpyl Biometric Fingerprint Attendance Machine Time Attendance Clock Employee Checking in Recorder Password/Fingerprint Access Control (US Plug)

  • Capable of transferring punches via USB thumb drive / Plug and play installation Wizard / Total hours for 100 employee / Interface ADP, QuickBooks, Paychex, Peachtree and more.
  • Weekly, bi-weekly, semi-monthly, and monthly pay periods / Automatic data polling and time synchronization / Ability to round totals to meet company policy / Unlimited number of departments, pay policies, schedules,and holidays.
  • Tracks and reports wages, tips and bonuses / Signal relay for ringing bells / Ethernet or direct communications, 50’ USB cable provided.
  • Eliminates manual calculation errors / Eliminates costly time cards / Easy and efficient way to manage your workforce / Reduces payroll management time.
  • Optional: Additional Terminals / Multi-User upgradeable (2 Users included) / Expandable Modules / Available Web Interface Module provides web access forpopular functions such as schedule and time card management.
Check Stock

SunFounder Raspberry Pi Ultimate Starter Kit for Raspberry Pi 4B 3B+ 400 with Raspberry Pi Smart Video Robot Car Kit

  • ... and 2B (Raspberry Pi not included). Suitable for adults and teens, the PiCar-X is the ideal platform for learning robotics programming, OpenCV, TensorFlow and Deep Learning..
  • 【Programing Software】PiCar-X supports both Python and SunFounder Ezblock language. Ezblock is engineered with an intuitive graphical-user interface to allow new Raspberry Pi users to quickly master robotics programming, and can provide remote control through a web interface..
  • 【One-stop Online Learning & Programming】SunFounders' online learning platform provides a professional one-stop shop for Raspberry Pi programming. Detailed tutorials and extensive content allow you to read, edit, program and download all of the provided code, and new content is continuously updated..
Check Stock

U.2 SFF-8639 Adapter,U.2 to PCIe NVMe SSD Adapter Card

  • The adapter is SFF-8639 U.2 port not SATA/NGFF/M.2 port..
  • Need M-key or NVME SSD, the B-key or B/M-key SSD cannot work..
  • Supports M.2 NGFF modules in format 2280, 2260, 2242 and 2230 with key M.
  • Note: for M-key or NVME SSD, please Update to add native driver support in NVM Express in Windows 7 and Windows Server 2008 R2.
  • it is u2 port, it can not work for SATA hard disk,System requirement: A free U.2 SFF-8639 interface or A free SFF-8643 interface.
Check Stock

PartPic Base Pkg

  • Inventory management software for Remstar vertical carousels and vertical lift modules..
  • Includes interface drivers for Robey Controls and Remstar MP, T85, T88, C2000 and C3000 controllers.
  • Base pkg supports one (1) device (carousel or lifts), additional devices can be ordered separately.
  • Options available include User Access Control, PartPic Server, Tooling, etc.
  • Part images can be defined and dozens of standard system reports are included.
Check Stock

YXMY2020 Benchtop Digital Resistance Tester AT527 AC Low ohm Meter Battery Internal Resistance Meter for Testing Various Electronic Components

  • This instrument can test 0.0001mΩ~3.3kΩ resistance, 0.00001V~400.000V DC voltage, maximum resistance 33000 display digits, and maximum voltage 800000 display digits. The AT527/527B combines high-precision, high-resolution and ultra-high-speed measurement with 0.5% resistance accuracy and 0.01% voltage accuracy up to 70 times per second..
  • The instrument is used for professional sorting function, standard Handler (PLC) interface, separate output resistance HIGH / IN / LOW signal and voltage HIGH / IN / LOW signal, can fully cope with high-speed automatic sorting system to complete the automatic pipeline test, At the same time, the enhanced IO signal can directly drive the power relay and signal relay..
  • The instrument has built-in RS-232C interface and USB-232 interface. The instrument is equipped with universal data acquisition software, comes with database function and Excel..
  • The export function can be effectively applied to remote control and data acquisition and analysis..
Check Stock

High-Precision AD/DA Expansion Board for Raspberry Pi 4B/3B+/3B/2B/Zero/W/Zero WH and Jetson Nano,Add High-Precision AD/DA Functions to Pi. Onboard ADS1256 8-CH 24bit ADC and DAC8532 2-CH 16bit DAC

  • There’s no AD/DA function on the Raspberry Pi GPIO interface, this may trouble you in the Pi development. However, it won’t be a problem anymore. The High-Precision AD/DA Board allows you to add high-precision AD/DA functions to the Raspberry Pi..
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
  • Onboard ADS1256, 8ch 24bit high-precision ADC (4ch differential input), 30ksps sampling rate Onboard DAC8532, 2ch 16bit high-precision DAC.
  • Onboard input interface via pinheaders, for connecting analog signal- the pinout is compatible with Waveshare sensor interface standard, easy to connect various analog sensor modules.
Check Stock

WSDMAVIS 2Pcs PWM to Voltage Module 0% -100% PWM Converted to 0-10V Voltage Digital Analog Signal Converter for PLC Signal Interface Switching

  • The PWM transfer voltage module LC-LM358-PWM2V converts the PWM digital signals into 0 to 10V analog signals.Allowable error:5%..
  • It can be used as signal interface switching for PLC or other industrial control boards. The output voltage is regulated by adjusting the duty ratio of the PWM..
  • The modules are small in size and easy to use in different places.Easy to operate, fine tuned by potentiometer..
  • MCU embedded technology.Work Voltage:DC 12V-30V(Power requirements:> 100MA).
  • Select the PWM signal input level range through short-circuit.The peak of 4.5V to 10V level. The short cap install in ‘5V’. This level is used for normal controller or 5V MCU.
  • The peak of 12V to 24V level, so inserted in 24V. The short cap install in ‘24V’. This level is used for normal PLC controller..
Check Stock