Reviews Sight Glass Liquid Flow Rate Indicator

3/4

3/4" NPT, FILTER & REGULATOR COMBINATION WITH GAUGE & MANUAL PUSH DRAIN.
11oz METAL BOWL AND VISIBLE SIGHT GLASS, COMES COMPLETE WITH METAL WALL MOUNT/BRACKET.
160 CFM FLOW RATE 5 MICRON FILTER ELEMENT INCLUDED.
225 PSI MAX INPUT PRESSURE, REGULATES PRESSURE FROM 7 - 215 PSI.

FLOW METER: the 1 inch flow meter can read instantaneous flow rate, single cumulative flow and total cumulative flows. But it has minimum flow rate requirment, if the flow rate of the tested liquid is lower than 2.5 gal/min, the readings will be inaccurate..
TECHNICAL PARAMETERS：① diameter of water inlet: 32mm.
③ the flow speed requirenment for tested liquid: 2.5~26 gal/min.
⑥ max temp of tested liquid: 158°F/70°C.
MULTIPLE UNITS: the flow meter provide 4 meauring units for option, which are liter, gallon, pint and quart. The unit defaults to gallons, if the unit is not gallons, please refer to the user manual to change the unit to the needed one..
NOT WATER PROOF: the flow meter is not water proof, please keep the display from water during use, to avoid chip damage. We upgraded The flowmeter has been upgraded from never-sleep model to auto-sleep model, which automatically dims the screen when no liquid is flowing through it..
WIDE APPLICATION: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids. If there is any problem, please contact us in time..

185 CFM Flow Rate 1" FPT Air Inlet port 1" FPT Air Outlet port 5 micron filter element. Wall mounting bracket included Sight Glass on Metal bowl to view your moisture level & Auto drain 250 PSI Max Input pressure Drain capacity 300ml Oil capacity 350ml.

185 CFM Flow Rate 3/4" FPT Air Inlet port 3/4" FPT Air Outlet port 5 micron filter element. Wall mounting bracket included Sight Glass on Metal bowl to view your moisture level & Auto drain 250 PSI Max Input pressure Drain capacity 300ml Oil capacity 350ml.

Max. Supply Pressure: 250 PSI / Max. Operating Pressure: 0-150 PSI.
SAF: 10 Micron Particulate Element, SAFM: 0.1 Micron Coalescing Element / Flow Rate: 37 SCFM @ 90 PSI.
Manual Drain, Metal Bowl w/ Sight Glass, Port Size: 3/4" NPT.
Use Metal bowl in pressure exceeding 150 PSI or when solvents harmful to polycarbonate is present.

Lubricator for pneumatic systems for proportional oil delivery over a wide range of air flows.
Precision needle valve for adjustment of delivery rate.
Transparent sight dome for 360-degree visibility.
High-flow 1/4" port for a flow rate of 20 cfm.

FLOW METER: Before use, please calibrate the flow meter with the liquid to be tested. And the flow rate of the liquid should exceed 2.5 gallons per minute, if the flow rate is too slow, the flow meter cannot measure normally. There is no battery included..
MULTI-FUNCTION DISPLAY: High-definition LCD display, can read single cumulative flow, instantaneous flow and total cumulative flow. The clear function can clear the value of cumulative flow, to make sure it is always within the measuring range. If your flow meter cannot work, please contact us in time..
HIGH-QUALITY MATERIALS: The aluminum alloy housing is sturdy, durable and corrosion-resistant, which have a long service time. The PCB circuit board make the battery have a long service life, and safe in use. Please NOTE: the LCD display is not water proof.
INSTALLATION: The flowmeter can be installed in horizontal and vertical directions, but the flow direction of the liquid needs to be consistent with the direction of the arrow on the flowmeter. There is no direction requirements for the installation of the display screen..
MEASURABLE LIQUIDS: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids..

Max. Supply Pressure: 250 PSI / Operating Pressure: 0 to 150 PSI.
10 Micron Element/ Flow Rate: 300 SCFM @ 90 PSI.
Auto Drain, Metal Bowl w/ Sight Glass, Port Size: 3/4" NPT.
Use Metal bowl in pressure exceeding 150 PSI or when solvents harmful to polycarbonate is present.
1 Year Limited Warranty, Manufactured in Korea.

Lubricator for pneumatic systems for proportional oil delivery over a wide range of air flows.
Precision needle valve for adjustment of delivery rate.
Transparent sight dome for 360-degree visibility.

HEAVY DUTY 3/4" FEMALE NPT IN LINE COMPRESSED AIR FILTER REGULATOR PIGGY BACK.
250 PSI MAX INPUT PRESSURE, 215 MAX OUTPUT PRESSURE, WALL MOUNTING BRACKET & GAUGE INCLUDED.
5 OUNCE METAL BOWL WITH VISIBLE SIGHT GLASS, 140 SCFM FLOW RATE.
ADJUSTS 7 PSI TO 215 PSI, HIGH IMPACT LOCKING COMPOSITE KNOB, 5 MICRON FILTER ELEMENT.
/4" NPT OUTSIDE THREAD DIAMETER IN INCHES 1.05"..