Reviews Sight Glass Flow Meter Gauge

BETOOLL HW9003 Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld

  • Brand New BETOOLL Argon / CO2 regulator and flow meter..
  • Flow Meters are more accurate than the flow gauge regulators..
  • The pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi..
  • And this flowmeter does not use a diaphragm, so it is more reliable than the flow-gauge style regulators..
  • The output flow is adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube..
Check Stock

3/4

  • 3/4" NPT, FILTER & REGULATOR COMBINATION WITH GAUGE & MANUAL PUSH DRAIN.
  • 11oz METAL BOWL AND VISIBLE SIGHT GLASS, COMES COMPLETE WITH METAL WALL MOUNT/BRACKET.
  • 160 CFM FLOW RATE 5 MICRON FILTER ELEMENT INCLUDED.
  • 225 PSI MAX INPUT PRESSURE, REGULATES PRESSURE FROM 7 - 215 PSI.
Check Stock

PneumaticPlus SAU2000M-N02DG-MEP Mini Three-Unit Combo Compressed Air Filter Regulator Lubricator FRL, Air Preparation Unit 1/4\ NPT - Metal Bowl, Auto Drain, Gauge

  • HEAVY DUTY 1/2" COMBINATION FILTER-REGULATOR-LUBRICATOR. PLEASE NOTE: 1/2" NPT MEASURES 0.850" OUTSIDE THREAD DIAMETER..
  • COMES EQUIPPED WITH WALL MOUNTING BRACKET AND BACK MOUNT PRESSURE GAUGE..
  • FILTER: 250 PSI MAX - 5 MICRON FILTER - 5oz METAL BOWL CAPACITY AND VISUAL SIGHT GLASS..
  • REGULATOR: 7 - 225 ADJUSTMENT PRESSURE - 250 PSI MAX..
  • LUBRICATOR:OIL FILL ADJUSTMENT TO REGULATE OIL FLOW - 5.1oz OIL CAPASITY AND VISIBLE SIGHT GLASS..
Check Stock

Goplus 1/3HP 4CFM Single Stage Rotary Vane Vacuum Pump and R134a Manifold Gauge Set, HVAC A/C Refrigeration Kit, Including Vacuum Pump, A Bottle of Vacuum Pump Oil, Suitable for R12, R22, R134

  • ...y. This AC system requires 500 microns ultimate vacuum delivering better than 150 microns to meet your vacuum requirements..
  • 【Multifunction Manifold Gauge】The HVAC service gauge set is excellent for diagnosing and repairing AC systems. The manifold comes with oversized sight-glass for easy viewing the refrigerant flow, and the high-quality gauge ensures high accuracy of the reading. It’s ideal for R12, R22, R134, and could be suitable for R410a after configuring the adapters. It does not include the adapter, but you can easily buy it locally or on Amazon..
  • 【Three-Color Coded Hoses】There are yellow, blue, and red hoses, each equipped with brass fittings. The fittings are 45 degrees on one hand and straight on the other, providing a leak-proof seal. The three hoses are 36" in length. All hoses comply with the SAE-J2196 standard. The working pressure of the hoses is 800PSI - 4000PSI and its acceptable refrigerant are CFC, HCFC, and HFC..
  • 【A Complete Refrigerant Tool Kit】This tool kit is a complete set for Mini-split/ HVAC and AUTO AC refrigerant recharging, including a vacuum pump, a pressure gauge set, 3 mu....
Check Stock

EXELAIR by Milton FRL Air Filter Regulator and Lubricator System - 1/2 NPT - Metal Bowl Automatic Float EX45FRL40A-04M

  • FRL Air Filter Regulator Lubricator System: Removes water/particles, protects air tools, prevents overdrying tools. Provides adjustable pressure, continuous oil supply, and extended air tool life..
  • Cast aluminum body. Locking adjustable pressure knob. Dial pressure gauge. Rotating flow dial. Easy-access oil fill cap. Automatic/Manual full-time fluid drain. Push-to-connect drain tubing connection to channel water safely..
  • Metal Bowl w/Sight Glass: Indicates fluid level. Filter Bowl Capacity: 7.4 OZ. Lubricator Bowl Capacity: 4.56 OZ..
  • 1/2" inch national pipe threads on both inlet/outlet. Dial gauge scale range: (0 to 160 PSI, 0 to 1.1 MPa). Adjustment range: 5-120 PSI..
  • Max Air Flow: 140 CFM. Max operating pressure: 145 PSI. Temperature range between 25°F and 140°F or -5°C and 60°C..
Check Stock

Argon/CO2 Flow Meter Gas Regulator Compatible with Mig Tig Welder Regulator with 6.6FT Gas Hose 10 to 60 CFH Output Flow 0 to 4000 PSI - CGA-580 Inlet argon flow gauge welding regulator

  • ...rdy and durable, which can withstand harsh environments and have a longer life. Came with 6.6 Ft argon welding gas regulator hose and protective cover are made of impact-resistant composite material for safety and durability.
  • 【Wide Application】Idea choice for CGA 580 Tank Fitting. This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet). So it will screw right into the Argon, Argon/CO2 tanks. IDEAL FOR Miller, Lincoln, Hobart, HTP, and most other welders! Idea choice for MIG TIG welding, cutting ,chemical and electronics industry.
  • 【Accurate Gas Flow Gague】Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube. 0-4000psi inlet pressure, easy-to-read bottle pressure gauge included, allowing you to view how much gas is left in the tank range 0 to 4000psi. Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. It also comes with a standard 1/4" barbed fitting.
  • 【Good Design】Use economic style flow meter regulator and single stage piston design, combination of regulator and flow meter as one unit, compact lightweight construction, convenient for use. Argon Regulator is a ideal choice for professional TIG/MIG welding applic....
Check Stock

Antstone HVAC Digital Manifold Gauge Set AC Dual Pressure Gauge Refrigeration Repair Tool with 3 Hoses 90 Kinds Refrigeration Data

  • ... [Multifunction] - 3 working modes: refrigerant pressure mode, vacuum percentage mode, leak detection mode. 5 pressure unit conversions: KPa, Bar, PSI, InHg, KgF/cm². 2 temperature unit conversions: ℃ & ℉..
  • [Explosion-proof Sight Glass] - Through the high-definition glass window, the flow of refrigerant can be clearly observed, so problems can be found in time, so that problems can be detected in time..
Check Stock

Protmex Anemometer, Digital Handheld Anemometer with USB Interface, Portable Temperature Humidity Wind Speed Meter with LCD Backlight, Air Volume Flow CFM Meter, PT6252B (Battery Included)

  • 【PROFESSIONAL AIR FLOW METER】Protmex PT6252B anemometer is a portable wind speed gauge that can accurately measure airspeed in 5 units: m/s, km/h, ft/min, knots, ft. Users can work under the dim surrounding with your anemometer via the bright backlit LCD screen..
  • 【USB DATA LOGGING AND DATA SYNC ON COMPUTER】The Protmex air flow meter cfm comes with a USB cable and PC software support can connect the wind meter to the computer via a USB port. For wind data logging, analyzing, and monitoring..
  • 【MULTI-FUNCTIONAL ANEMOMETER】The digital handheld anemometer can monitor and record wind speed, air volume, temperature, humidity, dew point temperature, wet bulb temperature, CFM airflow, and RH, perfect for balancing airflow in HVAC tasks such as duct vents, AC air output testing..
  • 【SWITCHABLE READING】The Protmex wind gauge has the functions of reading holding, maximum value, minimum value, etc. With a large-screen LCD and backlight, the multi-unit switching function..
  • 【ACCURATE AIR VELOCITY METER】Our Protmex wind speed meter for measuring wind speed range 0.5~30 m/s(+/- 2% of readings).
  • Wind temperature -20~60℃, -4℉-140℉(+/-0.2℃,32.56℉).
  • 2 temp sensors and 8 vanes make the meter is very sensitive to....
Check Stock

AM new 17793 Air Compressor Regulator Manifold Assembly Compatible with RIDGID + free E book Design and Repair

  • Max. Supply Pressure: 250 PSI / Max. Operating Pressure: 0-150 PSI.
  • SAF: 10 Micron Particulate Element, SAFM: 0.1 Micron Coalescing Element / Flow Rate: 37 SCFM @ 90 PSI.
  • Manual Drain, Metal Bowl w/ Sight Glass, Port Size: 3/4" NPT.
  • Use Metal bowl in pressure exceeding 150 PSI or when solvents harmful to polycarbonate is present.
Check Stock

Ancel S3000 EVAP Automotive Smoke Machine Leak Vacuum Diagnostic Tester with Oil Level Gauge & Air Flowmeter for All Vehicle Boat Truck Motorcycle

  • ...bine system, intake manifold, vacuum line, etc..
  • [High performance and high-quality metal structure] Compared to other simple smoke leak diagnostic testers, the ANCEL S3000 smoke machine not only has a built-in air pump, but also has a pressure gauge and an adjustable flow meter. The compressor generates air pressure from 0.8 to 14.5 psi, allowing smoke to be easily introduced into the tested sealing system, speeding up the leak detection process..
  • [Pressure gauge+adjustable flow meter] You can judge whether the tested system has a leak by the pressure change of the pressure gauge. By adjusting the size of the flow meter, you can also better control the amount of visible smoke to locate specific leaks. There are separate air mode and smoke modes to meet your different needs..
  • [Easy operation] A few simple steps can help you detect leaks in the vehicle system. (1) Add tobacco oil (USP mineral oil/baby oil), you need to buy it separately. (2) Check the power cord (12V DC car battery). (3) Connect the system and test for leaks..
Check Stock