Reviews Sight For Glock 43

Kingslayer

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax a....
Check Stock

Optic Mounting Plate for Glock(Non-MOS/Aftermarket Slide),Taurus GX4,G3C,Canik TP9SA-Compatible with ADE Stingray,Riton X3 Tactix PRD,Trijicon RMR/SRO,Swampox Kingslayer/Liberty/Justice red dot Sight

  • This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide. Installing this optic plate requires a qualitied Gunsmith.
  • The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • This optic dovetail plate made by ADE only fits genuine/standard glock that has a standard factory rear sight. It does NOT for MOS(optics ready) glock. It does NOT fit glock with AFTERMARKET slide..
  • Compatible with RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray and Trijicon RMR/SRO(Screws provided for Trijicon and ADE). Also compatible with other red dots that shares the similar footprint, but provided screws may NOT work, such as Holosun HS407C/HS507C/HS508T, Riton X3 Tactix PRD, Trijicon RMR/SRO, Swampox Kingslayer/Liberty/Justice red dot sight. We recommend get the right size screws from a local hardware store..
Check Stock

Kingslayer [Blu-ray]

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax a....
Check Stock

XS SIGHTS 3-Dot Tritium Night Sights Fits Glock Gen 1 – 5 +MOS Pistols Dual Illuminated Orange Front Sight Equipped with Tritium/Photoluminescent Glow Dot Glock 42 43 43X 48

  • Fits Glock 42, 43, 43X, and 48 – Generations 1-5.
  • XS 3-Dot Tritium Set With Orange Photoluminescent Glow Dot. Self-Illuminated Tritium Glows 24/7 Providing A Bright, Battery Free, Low Light Visible....
  • Photoluminescent Glow Dot Provides High Contrast Visibility In Bright Light, Absorbs Ambient Light, And Glows With The Self-Illuminated Tritium.
  • Blacked-Out Rear Sight Drives Focus To The Front Sight. Rear Sight Ledge Allows For One-Handed Slide Manipulations.
  • Steel Sights, Made In The USA. Glock Front Sight Tool Is Not Included.
Check Stock

ADE Red Dot Mounting Plate for Glock, Taurus GX4,G3C,G3 with Factory Steel Sight for Vortex Venom/Viper,Buris Fastfire

  • This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium), Vortex venom/viper, burris fastfire, meopta, shield, docter, insight Red dots..
  • This optic mounting plate also fits other red dot brands such as Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmr/holosun/shield footprint red dots..
  • Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will ....
Check Stock

Real Avid 4-in-1 Tool for Glock Handguns, Compact Gun Multitool with Front & Rear Sight Tool, Punch Tool & Gunsmithing Screwdriver for Cleaning & Maintaining Glock Pistols

  • FOR GLOCK PLATFORMS: Comprehensive armorer gun multitool is compatible with any Glock pistol..
  • FRONT SIGHT TOOL: Magnetic 3/16" hex driver fits stock and custom front sights, compatible with Glock night sights, aftermarket tall height sights, Truglo Glock sights, Trijicon Glock sights and more..
  • 3MM PUNCH DOWN TOOL: Essential Glock armorer tool fits all pins on any Glock gun.
  • aids gun disassembly for gun cleaning, pin removal and custom Glock accessories pin installation.
  • REAR SIGHT TOOL: . 050" Allen wrench allows for adjusting aftermarket rear sights for your Glock..
  • COMPACT GUNSMITHING TOOL: Small flat blade screwdriver helps prying slide lock spring & locking block. Also perfect for other accessories such as light, laser or red dot and Holster maintenance..
  • ERGONOMIC DESIGN: Sleek, lightweight frame stores all the tools and features push button release to snap open the tools..
  • COMPATIBLE: With Glock models, 19,17, 43, 26, 22, 48, 27, 45, 21, 42, 30, 34, 20, 44 and more..
Check Stock

ATG Patch and NcSTAR Heavy Duty Universal Pistol Dovetailed Rear Sight Pusher + Glock Tool (Ultimate Tool Kit)

  • Compatible with Glock 19,17, 43, 26, 22, 48, 27, 45, 21, 42, 30, 34, 20, 44 and more.
  • Rear sight pusher will work with 90 degree and 30 degree rear sight profiles.
  • Both side witness windows tool frame to check sight alignment.
  • Sight Glock tool frame can be bolted to, clamped onto work surface, or clamped onto a work vice.
  • Heavy duty Blue Anodized aluminum frame with steel tools.
Check Stock

Swampfox Kingslayer Pistol Cut RMR Foot Print 1x22 Micro Reflex Dot Sights 3 MOA (Red Dot)

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • Does NOT fit glock with AFTERMARKET slide with optic cut. We have made several improvements since it's initial release in 2016. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon..
  • The included optic plate for glock also fits Taurus GX4, G3C & G3 with steel rear sights.
  • Waterproof/Shock/Fog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture. Fully windage and elevation adjustable and lockable.
  • 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included).
Check Stock

Picatinny Rail Mount plate for Glock 17 19 22 Taurus G3C-Work with All railed red dot such as Vortex Venom, Doctor, Trijicon RMR, comes with builtin screw hole for Sig Romeo Zero, Holosun 407k/507k

  • This is a PICATINNY optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply “plug and play”. We recommend having a qualified gunsmith to install.
  • This picatinny plate for Glock pistol fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • This optic dovetail plate made by ADE only fits genuine/standard glock that has a standard factory rear sight. It does NOT for MOS(optics ready) glock. It does NOT fit glock with AFTERMARKET slide..
  • This picatinny mount provides 2 rail slots. Any red dot optic that equipped with a picatinny plate, is able to attach to this picatinny rail mount on a Glock pistol. Some red dots such as Vortex Venom, Burris Fastfire and ADE RD3 come with a picatinny mount with the red dot purchase, user can use the red dot provided picatinny mount to ....
Check Stock

Ade RD3-009-MOS Red Dot Reflex Sight for Glock MOS 17 19 34 35 40 41 Pistol Handgun

  • Fits Optics Ready Pistol such as Glock MOS System such as Gen4 17,19,34,35,40,41,43,43x and also fit Springfield OSP(non-hellcat), Canik TP9 SFX/Elite Combat(non elite sc), Walter PPQ Q5 Match, FNX 45 Tactical, IWI Masada handguns that come with mounting plates that marked for DOCTOR/VORTEX VENOM type red dot.
  • All mentioned above pistols must to be OPTICS READY model that comes with MOUNTING PLATE marked for DOCTOR/VORTEX. If not, user has to purchase after market mounting plate(not included with this red dot sight purchase) to replace the rear sight. For Non-MOS(non-optics ready) glock, search part number B01L9734Y6 on amazon for optic plate..
  • This red dot does NOT fits glock with AFTERMARKET/Non-Genuine Glock slide with custom optic cut for RMR because the footprint is different. 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included).
  • Comes with an Picatinny mounting plate. It does not comes with any other red dot mounting plate for a specific handgun, user need to purchase the plate separately for the plate made for the specific handgun..
  • Waterproof for 30mm under 3ft water. Shock/Fog Resistant.
Check Stock