Reviews Shure Beta 58a Microphone

Shure SLXD24D/B58 Dual Channel Wireless Microphone System with 2 BETA 58A Handheld Mics, SLXD24D/B58-G58

  • ...LECtION: Before purchasing, please ensure that the wireless frequency band you select works in your area (refer to Shure website for details > search Shure Wireless Frequency Finder)..
  • WHAT'S IN THE BOX: (2) SLXD2 handheld transmitter with Beta 58A cardioid dynamic microphone capsules and (1) SLXD4D dual-channel receiver, with antenna and rackmount accessories, (2) zippered bag and (4) AA batteries.
  • DIGITAL WIRELESS TECHNOLOGY: Digital predictive switching diversity. 44 MHz tuning bandwidth (region dependent). 32 available channels per frequency band (region dependent). Up to 10 compatible systems per 6MHz TV band.
  • 12 systems per 8 MHz band. RF Scan and IR Sync to quickly find an open frequency and link the transmitter to a SLX-D receiver. Easy pairing of transmitters and receivers over IR scan and sync..
  • BATTERY LIFE: Up to 8 hours from 2 AA batteries. Upgrade to the optional Shure SB903 Lithium-ion rechargeable battery to monitor battery charge status in hours and minutes, as well as battery life and health statistics..
  • SOUND QUALITY: Crystal clear 24-bit / 48 kHz digital....
Check Stock

Shure A55M Shock Mount Microphone Clip - Shockstopper Isolation Mount and Adapter for for Handheld Mics with 3/4 25-30mm Barrel Diameter including Shure models SM KSM Microflex and more

  • The Shure A55M Shock Mount Microphone Clip reduces transmission of mechanical noise and vibration by more than 20 decibels.
  • Securely attaches Shure models SM57, SM58, SM86, Beta57A, Beta58A, Beta87A, Beta87C, and KSM109 to standard microphone stands.
Check Stock

Shure RPM626 In-Line Microphone Preamplifier for Shure BETA Series

  • Shure RPM626 In-Line Microphone Preamplifier.
  • Compatible with the following Shure microphones: Beta91, Beta 98, Beta 98D/S, WL50, WL51, WBH53 (Beta 53), WBH54 (Beta 54), WB98H/C (Beta 98).
  • In-line preamplifier boosts resistance to RF interference.
Check Stock

Shure BETA 58A Supercardioid Dynamic Vocal Microphone with A25D Adjustable Stand Adapter, 5/8” to 3/8” (Euro) Thread Adapter and Storage Bag

  • Frequency response tailored for vocals, with brightened midrange and bass roll off to control proximity effect.
  • Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound.
  • Neodymium magnet for high signal–to–noise output.
  • Hardened steel mesh grille that resists wear and abuse.
  • Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration.
  • Minimally effected by varying load impedance.
  • Big sound. Full sound. Sophisticated sound. Is your mic living up to the power of your vocal. For decades, the BETA 58A has been through the ringer, pushing voice to the forefront on the biggest stages in the world. For sound that commands the attention of the entire crowd, this is your microphone..
  • Also in the box: 1 - A25D Adjustable Stand Adapter, 1 - 95A2050 5/8” to 3/8” (Euro) Thread Adapter, and 1 - 26A21 Storage Bag.
Check Stock

The Drum Recording Handbook (Technical Reference)

  • The industry standard for snare drum, and a reliable and high-performing choice for toms, Shure's cardioid dynamic SM57 microphone features a contoured frequency response that cuts through the mix with exceptional impact, while reproducing sound accurately..
  • Perfect for the kick drum, the supercardioid Beta 52A derives its low-end punch and sonic presence from a carefully tailored frequency response. Equipped with its own pneumatic shock mount, the Beta 52A is designed with an integral locking stand mount for quick-and-easy set up..
  • Shure's A56D universal drum mounting system can be used to position microphones virtually anywhere - on drum rims, microphone stands, even cymbal stands. Designed with captive parts to prevent the loss of individual pieces, the A56D is small, secure, and can be used with any standard microphone, making it a great tool for both stage and studio environments..
  • Top quality microphones and an affordable price makes the Drum Mic Kit an exceptional value for the performing drummer..
  • Suggested Applications: Kick Drum, Snare Drums , Rack/Floor Toms.
Check Stock

Shure A25D Microphone Clip - Break Resistant Stand Adapter for Handheld Wired Mics with ¾” Barrel Diameter

  • A25D microphone mount for Shure wired microphones SM58, SM57, SM86, SM87A and BETA87A, BETA87C.
  • Compatible with other wired mics with ¾” barrel diameter.
  • Break resistant microphone holder with adjustable angle.
Check Stock

For Shure Sm58 and Shure Sm7b Boom Arm, Shure Mv7 Desk Mic Stand Perfect For Gaming and Recording, Microphone Boom Arm with Pop Filter for Shure Series Mic.

  • [Professional design]: This black boom arm Specially designed for shure sm7b and shure series mic which can hold your shure sm7b microphone firmly.So that you can better show your voice in recording and live broadcasting.Note: package Not included shure microphone..
  • [Extraordinary black boom arm]:The blackshure mv7 boom arm can be matched with your shure series microphone, so that your shure sm7b microphone can be better matched with the black bracket, so as to show your extraordinary personal image..
  • [Adjustable and stable]: This shure microphone boom arm has a universal movable steering knuckle, which allows you to freely adjust the direction of the microphone to broadcast or sing. The scratch resistant base has a built-in anti-skid pad to ensure stability and protect the desktop from damage.The base wider mouth up to 2 inch/5cm to fit most desktop to fix the base..
  • [Strong bearing capacity]: this black microphone arm is made of strong steel, which is strong enough to keep the shure series microphone in a good position without "sinking" or "sinking",maximum load: about 2 lbs / 1.0 kg..
Check Stock

Shure Drum Microphone Kit for Performing and Recording Drummers Conveniently Packaged Selection of Mics and Mounts with Options for Kick Drum Snare Drum Rack Toms Floor Toms and Congas DMK57-52

  • The industry standard for snare drum, and a reliable and high-performing choice for toms, Shure's cardioid dynamic SM57 microphone features a....
  • Perfect for the kick drum, the supercardioid Beta 52A derives its low-end punch and sonic presence from a carefully tailored frequency response.....
  • Shure's A56D universal drum mounting system can be used to position microphones virtually anywhere - on drum rims, microphone stands, even cymbal....
  • Top quality microphones and an affordable price makes the Drum Mic Kit an exceptional value for the performing drummer..
  • Suggested Applications: Kick Drum, Snare Drums , Rack/Floor Toms.
Check Stock

Boom Arm Compatible with Shure Sm7b and Shure Sm58 Mic, Desk Mic Stand for Shure Series Microphone Such As Shure Mv7 Sm57 Se215 and Mv88.

  • Strong Compatibility :NOTE:You need to screw the corresponding nut in the bracket set to the bracket before you can install your Shure microphone on the bracket.Microphone boom arm adapter wide compatibility 3/8'' to 5/8'' Screw adapter are line with industry standards.This stand not only compatible with Shure, but also suitable for Shure series or mount most standard-sized microphones..
  • Easy to use:This Shure boom arm is simple to set up and demount, you can easily move and carry the microphone stand.Compatible with Shure series microphone,Suitable for voice-over, Video recording, broadcasting, TV stations for you additional convenience..
  • Heavy Duty Steel Structure: Super-strong spring with extra positioning screw, compact microphone arm stand designed for Shure carry,sturdy enough to keep mic well placed. Max load: Approx.2pound/1.0kg..
  • Rugged desk mount: In comparison to the old versions, this zinc alloy desk mount is built with anti-scratch pad and wider mouth up to 2 inch/5cm to fit most desktop to fix the base..
  • Various accessories: The set not includes Sh....
Check Stock

HIXMAN CA601 Convert Adapter For Shure Microphone to Compatible With Sennheiser Wireless Microphone Transmitter

  • The adapter is designed for connecting Shure Microphone to Sennheiser Wireless Microphone System.
  • Convert For Shure Mini XLR 4-Pin(TA4F) Switchcraft to 1/8 inch Mini-Jack with thread(3.5mm Locking Plug).
  • This Adapter Convert For Shure Microphone Compatible With Sennheiser Wireless Transmitter.
  • Compatible With Sennheiser Evolution Series, EW100, EW300, EW500, G1, G2, G3 & freeport, SK1093 SKD1 Wireless Bodypack Transmitter.
  • Please Notice! This Convert Adapter is only Compatible With Shure Headset/Lapel Microphone. NOT Compatible with Countryman/DPA and other brand....
Check Stock