Reviews Shewee Extreme Nato Greens

SMALLRIG Articulating Magic Arm with Double Ballhead NATO Clamps, Monitor Mount for Field Monitor, Lights, Audio Recorders, DIY Camera Rig - 2072

  • Double NATO Clamp Ball Head:An articulating magic arm with double NATO Clamp Ballhead (Made of aluminium alloy, durable, solid and sturdy), which can realize quick released and attachment. It could be slided to get the balance of the whole kit by the NATO rail design.
  • Flexibility: Camera monitor mount could be attached to a camera or monitor cage with NATO rail by the NATO clamp. The monitor mounted on it could be adjusted in different positions and angles via both the ballhead and ballhead clamp.
  • Strong Compatibility: The double NATO Clamp Ballhead can not only be attached to camera cages with NATO rail (such as gh5 cage rigs SmallRig 2049, SmallRig 2050, SmallRig 2051, SmallRig 2052) , top plates or side plates (such as Side Plate SmallRig 1847), but also can be attached to monitor cages with NATO rail, such as Monitor Cage(5″) SmallRig 1726, SmallRig 2008, Assassin Cage for Ninja SmallRig 1788,Cage for SmallHD SmallRig 1834 or other products with nato rail.
  • Knob Lock:A single wingnut (rotary knob) is applied to lock and tighthen the double ballhead directly, and thumb screws on both ends are utilized to lock the devices manually.
  • Please Note: the best load (max load) of the NATO Clamp Ballhead is 1.5kg.
Check Stock

Nitze Stinger Handle Universal Camera Top Handle with Built-in QR NATO Clamp - PA28-A

  • 【Multiple Mounting Points】Nitze nato camera handle PA28-A is filled with 1/4”-20 threaded holes, 1/4” locating holes, 3/8” ARRI locating holes all around the handle for more accessories expansion..
  • 【Built-in NATO Rail】Camera top handle grip built-in NATO rail on the top of the handle provides convenience for attaching accessories with NATO clamp..
  • 【Built-in QR NATO Clamp】Nato clamp top handle built-in QR NATO clamp on the bottom of the handle can be quickly attached and detached by the quick release lever..
  • 【Cold shoe Adapter】Nato rail top handle equipped with a cold shoe adapter which can be attached by two 1/4” screws. You can mount it in different locations on the handle for flexibility..
  • 【Ergonomic Design】Nitze stinger handle is ergonomically designed to provide you with a more comfortable experience during long-time shooting..
Check Stock

SMALLRIG Universal Low-Profile Quick Release NATO Rail Safety Rail 50mm/2inches Long with 1/4'' Screws for NATO Handle Camera Cage EVF Mount – BUN2468

  • 【NATO RAIL STANDARD】SMALLRIG BUN2468 is compatible with standard NATO accessories for quick release, such as clamps, handles and monitor holders, enabling you to quick attach and release the rig components.
  • 【THIN & LIGHTWEIGHT】The thickness of SMALLRIG 2468 is 6mm, and the length of it is 50mm. Weighs only 14g, it is made by Aluminum Alloy, very sturdy and lightweight, easy for storage.
  • 【ANTI-OFF DESIGN】SMALLRIG The safety pins on both side prevents your NATO accessories from accidentally sliding off.
  • 【MOUNTING OPTIONS】It can be attached to any accessories with two 1/4-20 holes via two 1/4-20 screws (included) to provide a mount for QR handle, EVF mount, NATO clamp, and camera plate, etc.
  • 【RECOMMENDATION】It works with items with NATO clamp, such as SmallRig NATO Clamp 1973, SmallRig Monitor Mount with NATO clamp 2100 and BSE2347, SmallRig Rotating Nato Handle HTN2362, for quick attachment and release.
Check Stock

Outsidepride Penncross Golf Creeping Bent Grass Seed for Tees, Putting Greens, & Fairways - 5 LBS

  • ...d wear tolerance make Penncross Creeping Bentgrass seed a natural for greens, tees, and fairways. The ability for Penncross Bent grass to perform under a wide range of conditions makes this putting green seed adaptable virtually worldwide..
  • Golf course architects have specified Penncross Bentgrass seed for areas of extreme cold and heat, and Penncross Creeping Bent has survived humidity where bermuda grass used to be the standard. Penncross Bent grass is designed for extensively managed golf greens and tees and lawn bowling surfaces in USDA zones 4 - 10..
  • Penncross performs best in soils with a pH of 5.5 to 8. It has a moderate nitrogen requirement with 1-2 pounds of actual N per 1,000 square feet per year adequate in most situations. Optimum mowing height for Creeping Bentgrass putting greens is 3/16 to 5/16 inch but it can be adjusted higher or lower depending upon maintenance practices and intended use..
  • Creeping Bent grass Penncross performs best on a sandy soil and tolerates clay soils with adequate drainage. Most Bentgrass varieties do not perform well in wet areas, however, Penncross can tolerate saturated soil conditions for short periods of time..
  • Growing Penncross Bentgrass is a rewarding and enjoyable experience, and this golf greens see....
Check Stock

Outsidepride Penncross Golf Creeping Bent Grass Seed for Tees, Putting Greens, & Fairways - 2 LB

  • ...d wear tolerance make Penncross Creeping Bentgrass seed a natural for greens, tees, and fairways. The ability for Penncross Bent grass to perform under a wide range of conditions makes this putting green seed adaptable virtually worldwide..
  • Golf course architects have specified Penncross Bentgrass seed for areas of extreme cold and heat, and Penncross Creeping Bent has survived humidity where bermuda grass used to be the standard. Penncross Bent grass is designed for extensively managed golf greens and tees and lawn bowling surfaces in USDA zones 4 - 10..
  • Penncross performs best in soils with a pH of 5.5 to 8. It has a moderate nitrogen requirement with 1-2 pounds of actual N per 1,000 square feet per year adequate in most situations. Optimum mowing height for Creeping Bentgrass putting greens is 3/16 to 5/16 inch but it can be adjusted higher or lower depending upon maintenance practices and intended use..
  • Creeping Bent grass Penncross performs best on a sandy soil and tolerates clay soils with adequate drainage. Most Bentgrass varieties do not perform well in wet areas, however, Penncross can tolerate saturated soil conditions for short periods of time..
  • Growing Penncross Bentgrass is a rewarding and enjoyable experience, and this golf greens see....
Check Stock

Forster Products 5.56 NATO MIN and MAX Headspace Gage Set

  • 5.56 NATO CHAMBER HEADSPACE GAGE: The proper use of Headspace Gages is the most reliable way to test rifle chamber length. The 5.56 NATO maximum chambering requires a slightly longer headspace than the commercial 223 cal. Rem..
  • GO/MINIMUM LENGTH: Corresponds to the minimum chamber dimensions. If a rifle closes on a GO gage, the chamber will accept ammunition that is made to SAAMI maximum specifications. The GO gage is essential for checking a newly-reamed chamber in order to ensure a tight, accurate, and safe chamber that will accept SAAMI maximum ammo. NATO Minimum rifle chamber gages check to see that the rifle will accept the longest (headspace dimension) NATO ammunition cases that are currently manufactured..
  • MAXIMUM LENGTH: The Forster NATO Maximum rifle chamber gage checks to see that the rifle does not have excessive headspace, which could lead to dangerous pressure problems. The NATO Maximum Headspace Gage measures 1.6455″.
  • PRECISION MACHINED: Manufactured from top-quality, hardened steel and precision ground to ANSI and SAAMI tolerances. Headspace tolerance ground to a very exacting ±.00015. Each Headspace Gage thoroughly inspected with NIST-certified measurement tools to ensure the highest quality product..
Check Stock

SMALLRIG Articulating Magic Arm with Screw Ballhead and NATO Clamp Ballhead, Monitor Mount for Field Monitor, Lights, Audio Recorders, DIY Camera Rig - 2071

  • ▶ NATO Clamp Ballhead: Attach cage with NATO rail with on the other end via ballhead with NATO clamp, while it could attach monitor cage on the other end via ballhead with 1/4’’ screw.
  • ▶ Quick Release & Adjust Angle: It features quick release and attachment and could be slid to get the balance of the whole kit.The monitor mounted on it could be adjusted in different positions and angles via both the ballhead and ballhead clamp.
  • ▶ Precision locking device: A single wingnut is applied to lock the double ballhead tight directly, and thumb screws on both ends are utilized to lock the devices manually and a spared hex spanner is ready to lock it tighter.
  • ▶ Extensive compatibility: The ballhead with 1/4″ screw thread can not only be connected to monitors, camera cages (such as gh5 cage rigs SMALLRIG 2049, SMALLRIG 2050, SMALLRIG 2051, SMALLRIG 2052), but also can be attached to monitor cages with NATO rail, such as Cage(5″) SMALLRIG 1726, SMALLRIG 2008,SMALLRIG Cage for Ninja Assassin 1788, SMALLRIG Monitor Cage 1834 or other products with nato rail.
  • ▶ What You Get: 1 x Ballhead with 1/4’’ Screw.
Check Stock

SMALLRIG Monitor Cage for Atomos Shogun Ninja Assassin - 1788

  • It’s only compatible for Atomos Shogun and Ninja Assassin (Shogun Inferno, Shogun Flame, Ninja Inferno, Ninja Flame, Shogun Studio and other monitors CAN NOT be used on this cage).
  • This device comes with arrays of 1/4″-20 & 3/8″-16 accessories mounting holes for extended functions.
  • A NATO rail on each end of the top for attaching NATO rail clamps.
  • anti-off device to prevent the SSD card from sliding.
  • equipped with a NATO rail on the bottom to attach NATO rigs.
  • Enable an access to mount the SmallRig sunhood for Atomos Shogun and Ninja Assassin Monitor.
  • Package includes: 1 * monitor cage, 1 * cable clamp, 2 * 1/4″-20 screws.
Check Stock

Nathan Zipster Running Belt.Bounce Free Waist Pack. Pockets with Zippers. Runners Fanny Pack. Fits All iPhones, Android, Samsung etc. for Men and Women

  • 5.56 NATO CHAMBER HEADSPACE GAGE: The proper use of Headspace Gages is the most reliable way to test rifle chamber length. The 5.56 NATO maximum chambering requires a slightly longer headspace than the commercial 223 cal. Rem..
  • GO/MINIMUM LENGTH: Corresponds to the minimum chamber dimensions. If a rifle closes on a GO gage, the chamber will accept ammunition that is made to SAAMI maximum specifications. The GO gage is essential for checking a newly-reamed chamber in order to ensure a tight, accurate, and safe chamber that will accept SAAMI maximum ammo. NATO Minimum rifle chamber gages check to see that the rifle will accept the longest (headspace dimension) NATO ammunition cases that are currently manufactured..
  • MAXIMUM LENGTH: The Forster NATO Maximum rifle chamber gage checks to see that the rifle does not have excessive headspace, which could lead to dangerous pressure problems. The NATO Maximum Headspace Gage measures 1.6455".
  • PRECISION MACHINED: Manufactured from top-quality, hardened steel and precision ground to ANSI and SAAMI tolerances. Headspace tolerance ground to a very exacting ±.00015. Each Headspace Gage thoroughly inspected with NIST-certified measurement tools to ensure the highest quality product..
Check Stock

Nato Smart Mount - Magnetic Smart Device Holder Universal Adhesive

  • Nato Smart Mount -Smartphones, Tablets, Devices .
  • Nato Smart Mount is a revolutionary new magnetic mounting system for conveniently and safely holding all of your mobile devices..
  • Simply hold your device close to the Nato Smart Mount and it magically locks into place. It's that easy!.
  • Use it anywhere - in your car, boat, office, home or anywhere you need hands free convenience.
Check Stock