Reviews Shake Resistance Pressure Gauge

How to Setup Your Guitar Like a Pro: An Easy Guide for Beginners

  • 1.【Manifold Gauge Set for Refrigeration Equipment】The refrigeration gauges are dedicated to installing, testing, and maintaining refrigeration equipment such as air conditioners, refrigerators, and cold storage. The 2 temperature clamps in the manifold gauge set have strong corrosion resistance and tightness, and will not easily break. The refrigerant gauge is also equipped with 3 standard test hoses (1.5m) and a portable toolbox, which is convenient for the storage and carrying of the meter..
  • 2.【Refrigeration Gauges for Double Pressure and Dual Temperature Measurement】The digital HVAC gauges can measure double pressure (gauge pressure) at the same time, as well as dual temperature measurement, with automatic multi-unit pressure conversion, automatic conversion of temperature Celsius / Fahrenheit, to facilitate different needs. Note: Please make sure that the temperature sensor clip is properly connected. A poor connection will result in an inaccurate reading of the value..
  • 3.【HVAC Gauges with High-Precision Data Unit and Refrigerant Database】The HVAC manifold gauge built-in 32-bit digital processing unit and a high-precision data acquisition unit, high ....
Check Stock

Manometer, 12 Selectable Units Differential Pressure Gauge, Dual-Port Manometer Gas Pressure Tester, Digital Pressure Gauge with Backlight, Professional Air Pressure Meter, Handheld HVAC Manometer

  • 【Portable Manometer with ABS Material and LCD Display】The handheld digital pressure gauge is made of ABS material, and the excellent performance of high-temperature resistance and impact resistance makes the air pressure meter have a long service life. 4.45CM×4.95CM display, support LCD backlight, convenient lighting operation, display data clearer and easier to read..
  • 【Multifunctional Pressure Gauge with Accurate Readings】The digital pressure gauge adopts a high-quality pressure sensor, which has the characteristics of high precision and wide range. High-precision ADC and low-power MCU. Maximum/minimum mode and DIF mode. Professional air pressure gauges are specially used for gas measurement and calibration, gas pressure system troubleshooting, laboratory testing, maintenance and installation of blowers, clean rooms, boilers and other gas appliances..
  • 【Differential Pressure Gauge with 12 Selectable Units】The length of the two hoses in the gas pressure gauge set is 25cm.
  • The thread size of the barb metal connector is 1/8 inch.
  • 12 optional units (mmHg, inHg, ftH₂O, cmH₂O, inH₂O, Pa, KPa, mbar, bar, psi, Kgcm² and ozin²).
  • 【Manometer for Measuring Positive and Negative Pressure】There are two ports on the top of the differentia....
Check Stock

JIFETOR Universal Auto Gasoline Gas Fuel Injection Pressure Tester Gauge Tool Set Only for Bosch CIS System Car Truck SUV Motorcycle ATV RV SUV Blue Case

  • HOSE WITH METAL ADAPTERS: Fuel pressure gauge set contains 1PC built-in 43" long rubber hose with 44" clear drain hose, and 1PC 27.5" Bosch CIS- specific hose valve assembly for test connection. Rubber hoses endure torsion, temperature and pressure extremes to ensure safe use. Brass for corrosion resistance, and ductility at high temperatures. Both end with brass adapter which is perfect for hose systems as it can withstand long periods of wear and tear..
  • PRECISION MANUFACTURING: Fuel injector pump tester kit is made of high-quality metal and rubber materials, exquisite craftsmanship, sturdiness and durability. Pressure gauge has precise pointer for error-free readings. Pressure relief valve and clear drain hose can immediately and safely release pressure and restore fuel flow after the test. Precision thread design with O rings promises high seal to avoid air leaks. Brass for corrosion resistance, and ductility at high temperatures..
  • SATISFACTORY CUSTOMER SERVICE: We are committed to providing you with worry-free shopping experience. 30 days full refund or free exchange for returned complete unused JIFETOR product in the original packaging.
  • One year reliable after-sales service. Please feel free to contact us by email or Amazon mess....
Check Stock

Raincovo Pressure Washer Gauge, 6000 PSI, 3/8 Inch Quick Connect, Pressure Gauge for Power Washer

  • Application Widely: Pressure washer gauge fits pump and hose with 3/8 inch quick connect. Works with most brands of electric and gas pressure washer..
  • Reading Easily: The scale of power washer gauge is clear, with a dual dial design. Reading is up to 6000 PSI..
  • Quality material: Pressure washer gauge kit is made of stainless steel. High temperature and corrosion resistance..
  • High precision: Gauge interior is filled with shock-resistant glycerin to ensure accurate readings..
  • CUSTOMER SERVICE: We focus on the research and development of pressure washer accessories. Any questions please contact us, We have a quick reply within 24-hour..
Check Stock

ARTILAURA 6 Gauge Set-GPS Speedometer, Tachometer, Fuel Gauge, Water Temperature Gauge, Oil Pressure Gauge, Voltage 7 Color Backlight for Car AUTO Boat Marine

  • ...ht : red、green、blue、yellow、olivine、orange、purple..
  • [ GPS Speedometer Gauge Set ]: GPS Speedometer gauge indicating Range: 0 - 80 MPH, Tachometer indicating Range: 0 - 8000 RPM, Volt gauge indicating Range: 8 - 16V, Fuel Level gauge indicating Range: E - F & Resistance 240-33 ohms, Water Temperature gauge indicating Range: 30 - 250°F (0 - 120°C), Oil Pressure gauge indicating Range: 0 - 150 PSI (0 -10 BAR)..
  • GPS Speedometer and Tachometer: Standard 85mm (3 3/8") hole in the panel (II) and allow a clearance of 55mm (2 3/16") behind the panel to fit the gauge. The Fuel Gauge, Water Temperature, Volt and Oil Pressure Gauge diameter is 2-1/16 inch (52mm)..
  • 【Material】The boat gauge are made of 316L Metal, Rubber and Plastic. Scratch resistant curved glass lenses. IP67 waterproof and dustproof grade..
  • ⭐⭐⭐⭐⭐[Attention]: Package Includes GPS Antenna, Tachometer Sensor(M16*1.5), Water Temp Sensor (1/8 NPT), Oil Pressure Sensor (1/8 NPT), 240-33 ohms Fuel Level Sender & Installation Instructions . Please contact us if you are dissatisfied with our....
Check Stock

ARTILAURA 6 Gauge Set-GPS Speedometer 120MPH, Tachometer, Fuel Gauge, Water Temperature Gauge, Oil Pressure Gauge, Voltage 7 Color Backlight for Car AUTO Boat Marine(White)

  • ...t : red、green、blue、yellow、olivine、orange、purple..
  • [ GPS Speedometer Gauge Set ]: GPS Speedometer gauge indicating Range: 0 - 120 MPH, Tachometer indicating Range: 0 - 6000 RPM, Volt gauge indicating Range: 8 - 16V, Fuel Level gauge indicating Range: E - F & Resistance 240-33 ohms, Water Temperature gauge indicating Range: 30 - 250°F (0 - 120°C), Oil Pressure gauge indicating Range: 0 - 150 PSI (0 -10 BAR)..
  • GPS Speedometer and Tachometer: Standard 85mm (3 3/8") hole in the panel (II) and allow a clearance of 55mm (2 3/16") behind the panel to fit the gauge. The Fuel Gauge, Water Temperature, Volt and Oil Pressure Gauge diameter is 2-1/16 inch (52mm)..
  • 【Material】The boat gauge are made of 316L Metal, Rubber and Plastic. Scratch resistant curved glass lenses. IP67 waterproof and dustproof grade..
  • ⭐⭐⭐⭐⭐[Attention]: Package Includes GPS Antenna, Tachometer Sensor(M16*1.5), Water Temp Sensor (1/8 NPT), Oil Pressure Sensor (1/8 NPT), 240-33 ohms Fuel Level Sender & Installation Instructions . Please contact us if you are dissatisfied with our....
Check Stock

Digital Manifold Gauge Set HVAC Dual-Channel Temp Sensor HVAC Tools for 89 Kind of Refrigerant Digital AC Gauges Vacuum Pressure&Temp Test Digital HVAC Gauges with Hoses Digital Refrigeration Gauge

  • 1.【Manifold Gauge Set for Refrigeration Equipment】The refrigeration gauges are dedicated to installing, testing, and maintaining refrigeration equipment such as air conditioners, refrigerators, and cold storage. The 2 temperature clamps in the manifold gauge set have strong corrosion resistance and tightness, and will not easily break. The refrigerant gauge is also equipped with 3 standard test hoses (1.5m) and a portable toolbox, which is convenient for the storage and carrying of the meter..
  • 2.【Refrigeration Gauges for Double Pressure and Dual Temperature Measurement】The digital HVAC gauges can measure double pressure (gauge pressure) at the same time, as well as dual temperature measurement, with automatic multi-unit pressure conversion, automatic conversion of temperature Celsius / Fahrenheit, to facilitate different needs. Note: Please make sure that the temperature sensor clip is properly connected. A poor connection will result in an inaccurate reading of the value..
  • 3.【HVAC Gauges with High-Precision Data Unit and Refrigerant Database】The HVAC manifold gauge built-in 32-bit digital processing unit and a high-precision data acquisition unit, high ....
Check Stock

VEVOR Hydraulic Pressure Test Kit, 25/40/60Mpa/9Couplings, Excavator Parts Hydraulic Tester Coupling, Hydraulic Pressure Gauge Kit for Excavator Construction Machinery

  • ...gs: Eight interchangeable test couplings are included in this excavator hydraulic pressure test kit, with the sizes of G1/8, G1/4, G3/8, M10/1, M10/1.25, M14/1.5, UNF7/16-20, and UNF9/16-18, which are suitable for many kinds of standard excavators..
  • Durable Materials: This hydraulic gauge test kit contains corrosion resistance gauges and carbon steel couplings with high strength. The working oil filled in the meters effectively avoids vibration and pulsation..
  • Portable Case & 5.25' Test Hose: All parts of the hydraulic pressure test gauge are neatly stored and tightly placed in a thickened plastic toolbox. The compact design makes it save storage space and easy to carry. In addition, three test hoses help extend the pressure test gauge to the inside of the machine for easy reading..
  • Wide Application: This excavator hydraulic pressure gauge comfortably fits for pumps, compressors, hydraulic presses, pneumatic equipment, and motors of various excavators. It is widely applied in construction, shipping, etc..
Check Stock

VEVOR Hydraulic Pressure Test Kit, 25/40/60Mpa/11Couplings, Excavator Parts Hydraulic Tester Coupling Hydraulic Pressure Gauge Kit for Excavator Construction Machinery

  • ...Ten interchangeable test couplings are included in this excavator hydraulic pressure test kit, with the sizes of G1/4, R1/4, G3/8, G1/8, M10 x 1, M10 x 1.25, M1/8, M14 x 1.5, 7/16, and 9/16, which are suitable for many kinds of standard excavators..
  • Durable Materials: This hydraulic gauge test kit contains corrosion resistance gauges and carbon steel couplings with high strength. The working oil filled in the meters effectively avoids vibration and pulsation..
  • Portable Case & 5.25' Test Hose: All parts of the hydraulic pressure test gauge are neatly stored and tightly placed in a thickened plastic toolbox. The compact design makes it save storage space and easy to carry. In addition, three test hoses help extend the pressure test gauge to the inside of the machine for easy reading..
  • Wide Application: This excavator hydraulic pressure gauge comfortably fits for pumps, compressors, hydraulic presses, pneumatic equipment, and motors of various excavators. It is widely applied in construction, shipping, etc..
Check Stock

VEVOR Hydraulic Pressure Test Kit 25/40/60MPa, Hydraulic Test Gauge Kit with 6 Couplings, Hydraulic Gauge Kit Made of 304 Stainless Steel, for Excavator Construction Machinery

  • Accurate Pressure Gauge: The hydraulic gauge kit has three pressure gauges of different ranges: 0-3500PSI/25MPa, 0-5800PSI/40MPa, 0-8600PSI/60MPa. With two units and precise graduations, the meters are accurate in measuring pressure..
  • Interchangeable Test Couplings: Six interchangeable test couplings are included in this excavator hydraulic pressure test kit, with the sizes of G1/4, G1/8, G3/8, M14 x 1.5, M10 x 1, and M10 x 1.25, which are suitable for many kinds of standard excavators..
  • Durable Materials: This hydraulic gauge test kit contains corrosion resistance gauges and carbon steel couplings with high strength. The working oil filled in the meters effectively avoids vibration and pulsation..
  • Portable Case & 5.25' Test Hose: All parts of the hydraulic pressure test gauge are neatly stored and tightly placed in a thickened plastic toolbox. The compact design makes it save storage space and easy to carry. In addition, three test hoses help extend the pressure test gauge to the inside of the machine for easy reading..
  • Wide Application: This excavator hydraulic pressure gauge comfortably fits for pumps, compressors, hydraulic presses, pneumatic equipment, and motors of various excavators. It is widely applied in construction, shipping, etc..
Check Stock