Reviews Shaft Seal

Yukon Gear & Axle (YMS8835S) Axle Seal for Differential Bearing, for 1559 OR 6408 bearing, NOT COARSE spline 12T

  • Replacement Axle Shaft Seal Installer - This special tool allows you to install and insert the axle shaft seal of your vehicle in its proper depth, distance and position by driving it in with a rubber mallet or hammer onto the wheel knuckle assembly. This is applicable for your 1999 F-250, 2000 F-350, 2001 F-450, 2002 F-550 and 2003 Excursion 4x4 vehicle..
  • Compatible Replacement for Ford Vehicles - 2000, 2001 , 2002, 2003, 2004 Excursion 4x4 | 98, 99, 00, 01, 02, 03, 04 F250 | 98, 99, 00, 01, 02, 03, 04 F350 | 98, 99, 00, 01, 02, 03, 04 F450 | 1998, 1999, 2000, 2001, 2002, 2003, 2004 F550 |. Replacement of the axle shaft seal is necessary after removal when servicing the front-end parts like the u-joints to avoid having issues when engaging 4WD. Installation can be tricky and with a proper tool like this, it will be perfect everytime..
  • Replaces Part# 6695 commonly found on popular vehicles including year models 1998, 1999, 2000, 2001, 2002, 2003, 2004. This axle shaft seal tool is constructed with high quality steel, black finished and designed with handle and the correct ridges compatible with Ford vehicles. This is applicable to your Excursion 4x4, F-250, F-350, F450 and F-550 vehicles only..
  • OEM Fit, Quality, Finish - While this is not a genuine....
Check Stock

Basic Repair Kit & Seal for Suntec A2VA7116 A2VA3006 A1VA7112 Oil Burner Pumps

  • BASIC Suntec Pump Repair Kit For Most Suntec & Beckett Model "A" Series Pumps. Includes most common failed parts - Seal, Internal Diaphragm, Cover Gasket and Strainer..
  • Seal is 7/8" diameter x 1/4" high x 5/16 diameter shaft. Diaphragm Fits on top of gear set. Be sure to spin shaft by hand while tightening the gear set..
  • Cover Gasket is full coverage, keeping contaminants out of the gear set..
  • The Lip Seal, Shaft Seal DOES NOT fit early bronze nosed, face seal pumps, such as 7016 & 7012..
Check Stock

Bonbo Turbine & Stator Shaft Teflon Seal Installer/Resizer Transmission Tool J-36418-C & ST-1503 for GM 700-R4, 4L60, 4L60-E, 4L65E, 4L70E and 4L70L

  • J-36418-C Turbine Shaft Teflon Seal Installer/Resizer – For GM 700-R4, 4L60, 4L60-E, 4L65E, 4L70L 1982 - UP transmissions..
  • 1503 Stator Shaft Teflon Seal Installer/Resizer – Used on GM 700-R4, 4L60, 4L60-E, 4L65E and 4L70E transmissions..
  • Great Function – This tool kit will effectively protect the Stator or Turbine Shaft Teflon seals from damage, tear and distortion during installation..
  • Direct Replacement – 1503 Stator Shaft Teflon Seal Installer/Resizer is alternative to Atec Trans-Tool T-1503, #39SS both in function and performance. J-36418-C Turbine Shaft Teflon Seal Installer/Resizer is a perfect substitution for Kent-Moore J-36418-C, Atec Trans-Tool T-1574, T-1574-Long and T-1574-M..
  • Superior Quality – Made of premium and wear resistance aluminum alloy, sturdy, impact resistance and anti-corrosion for much longer service time. Won't easily crack or break like the cheap plastic ones..
Check Stock

Replacement PS-1000 5/8 AS-1000 Shaft Seal for Pentair Whisperflo & Ultraflow Swimming Pool/Spa Pump PS 1000 AS 1000 Parts

  • Replacement Pump Seal for PS-1000 AS-1000.
  • Shaft Seal for Pentair Whisperflo & Ultraflow Pumps.
  • Southeastern Brand Pool and Spa Replacement Shaft Pump Seal.
Check Stock

National 99171 Redi-sleeve

  • Designed to repair damaged, grooved or worn shafts.
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications.
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed.
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading.
  • Easy to install with removable flange and installation tool.
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft.
Check Stock

National 99353 Redi-sleeve

  • Designed to repair damaged, grooved or worn shafts.
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications.
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed.
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading.
  • Easy to install with removable flange and installation tool.
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft.
Check Stock

E-cowlboy Bearing & Seal Kit with Tool Fit Whirlpool W10435302 & W10447783 Washer Tub Bearing Installation & Removal Tool Complete Package (19 Pcs)

  • Great Compatibility — Works with some Whirlpool Washer / Kenmore Washer / Combo Washer / Maytag Washer (Please be sure that your washer model should match on our product description listing below).
  • Superior Quality — Advanced heavy duty steel process, durability, high precision and hardness. High quality aftermarket shaft, bearings and seals provide a much longer service life. No noises and no leaks..
  • Benefits — Comes with everything required to remove, fix and replace the old parts. Replace bearings and use the PVC seal to reseal the installation. Grease and adhesive kits to ensure parts move smoothly during and after installation..
  • Includes — Tub Bearing Shaft & Seal Kit: Drive Shaft / Spacer Tube / Tub Seal / Top Bearing / Washer / Shaft Nut / Bottom Bearing / Threadlocker / Adhesive and Grease / Tub Press Tool Kit: Top Press Nut / Top Bearing Press / Press Rod / Bottom Bearing Press / Thrust Bearing / Shaft Nut / Locking Bar / Steel Pole and PVC Tube..
  • 100% Satisfaction Guarantee — If you’re not 100% satisfied with E-cowlboy’s washer tools, simply return it for a full refund in 30 days. Support 12 months’ Warranty. Professional & Sincere Service allows you to take no risks to purchase in E-cowlboy!.
Check Stock

Timken 710596 Axle Shaft Seal

  • APPLICATION: Compatible with 1998-2004 Ford F-250 F-350 F-450 and F-550 4X4s having the vacuum-operated front axle..
  • FUNCTION: This tool is necessarily if you want your vacuum locking hubs to work after replacing the axle seals since it prevents front hub vacuum leaks that would cause the 4WD not engage and covers in oil to prevent corrosion..
  • EASY TO USE: This tool allows you to install and insert the axle shaft seal of your vehicle in its proper depth, distance and position by driving it in with a rubber mallet or hammer onto the wheel knuckle assembly..
  • MATERIAL: Made of high quality steel, the surface with black oxide finish ensures great strength and durability while resisting rust and corrosion( It is normal that there are iron filings in the groove, if you mind, please buy it carefully )..
  • REPLACES PART# 6695: Vacuum seals delicately works with the axle shaft and this axle shaft seal tool is produced to ensure proper installation to the wheel knuckle assembly, prevents damages on the new seal, saves time and a lot easier..
Check Stock

NEW OEM Produced for Electrolux Frigidaire Whirlpool 519306005 241577505 Refrigerator Inverter Control Board by OEM Mania Replacement Part - 1 YEAR WARRANTY

  • 【W10324647 Tub Seal】1PCS Washer Tub Seal Assembly W10324647. Tub seal assembly W10324647 prevents water from leaking around the drive shaft that goes through the bottom of the washer tub..
  • 【Tub Seal W10324647 Replace】 W10006371,1877231,W10324647,AP4567772,PS3407958,EAP3407958,AH3407958,EA3407958.
  • 【W10324647 Mode Reference】 MVWC415EW1,11020022010,11020022011,11020022012,11020022013,11020022014,7EWTW1300YM0,7EWTW1409YM0,7EWTW1515YW0,7EWTW1715YW0,7MKTWS300DW0,7MKTWS400DW0.
  • 【W10324647 Repair & Advice】 1.Removed top outer tub liner and agitator, next removed tub. 2.Removed drive belt and motor disconnected wire harness from motor, capacitor and pump. 3.Removed agitator gears, transmission assembly,old tub seal. 4.Cleaned area for seal. Applied gre ase to new seal. Insert new seal. Reverse above steps..
  • 【Repair Solution for Washing Machine Tub Seal】 Leaking water, not washing properly, unusual noises, shaking and moving,Tub leaked ruined bearing,Louder than normal in spin cycle,Leaking under tub next to shaft spline..
Check Stock

AP1336F High Pressure Radial Shaft Seal 25-45-9mm TCZ Oil Seal for Hydraulic Pump Motor

  • DMHUI shaft seals are widely recognized for quality and reliable performance for every type of repair. Provides long life while providing superior performance.
  • Shft seal with TS 16949 and ISO 9001:2008 Certificate.
  • DMHUI is a leading shaft seal manufacturer with 17th experience in China mainland. As a professional manufacturer, we mainly exports rubber sealing products. Various in styles, including hydraulic oil seal, gearbox oil seal, o-ring, various rubber parts etc..
Check Stock