Reviews Shaft Mounted

Gryphon Studio Stained Glass Grinder

  • ...Mini Automatic Portable Stained Glass Grinder Water Ceramic Glass Machine DIY Desktop Grinding Tool.
  • ►Easy to operate：Before installation of grinding wheel, topped with lubricant, engine shaft grinding wheels need to apply a layer of lubricant inside.The grinding wheel mounted to the engine shaft, the fixed screw position higher than the engine shaft. The position of the grinding wheel on the axle must be at least 1/8" diamond part above the operating table.Fixed grinding wheel on the shaft with hexagonal wrench clockwisely..
  • ►Safety Use：Voltage: 110V, 0.1A,Power: 65W,Rotating speed: 4200r/min,Color: Red,Inside the rotary shaft (the fine shaft of the grinding head) diameter: 0.7cm, Grinding wheel inner diameter: 0.79cm.
  • ►Multifunction：Suitable for grinding glass,ceramics and other hard and brittle material.Mini size and easy to carry.Stable and reliable performance.Automatic water available for some sizes(5/8” 1”).New design switch avoid electronic conduction.Glass, ceramics, such as grinding hard brittle materials.Grinding variety of geometric shapes: plane, curve, rounded corners, slope, etc..
Check Stock

Martin 3020 2 Taper Bushing, Sintered Steel, Inch, 2\ Bore, 4.25\ OD, 2\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Flexible Shaft Power Drill Extension with 1/4-Inch keyless Chuck Carded Flex Attachment Adapter Cable Shaft for Rotary Grinder Woodworking Tool Black - By RamPro

  • ✓The flexible shaft lets you see your progress while the sander moves on the contours of your work piece. The Installation of the flex shaft is....
  • ✓Specification: Equipped with a highly flexible extension 1/4-inch scroll chuck and The shaft is intended to be used around 10,000 rpm, mainly for....
  • ✓Quality: The front handle of the flexible shaft is made of strong rubber. This flex shaft can be mounted, which is simple and easy to install, just....
  • ✓Design: The flex shaft’s high quality and vibration-free design is optimally matched to the motor. Ergonomic pen design with a smooth rubber....
  • ✓Satisfied Service and Guarantee - Enjoy a smooth & frustration-free experience with our 100% Satisfied Service in one Month! If you have any....
Check Stock

Martin 2517 1 1/2 Taper Bushing, Sintered Steel, Inch, 1.5\ Bore, 3.375\ OD, 1.75\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 1008 5/8 Taper Bushing, Sintered Steel, Inch, 0.62\ Bore, 1.386\ OD, 0.875\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2517 2 7/16 Taper Bushing, Sintered Steel, Inch, 2.44\ Bore, 3.375\ OD, 1.75\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2517 1 1/4 Taper Bushing, Sintered Steel, Inch, 1.25\ Bore, 3.375\ OD, 1.75\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2012 1 5/8 Taper Bushing, Sintered Steel, Inch, 1.63\ Bore, 2.75\ OD, 1.25\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2012 1 1/8 Taper Bushing, Sintered Steel, Inch, 1.13\ Bore, 2.75\ OD, 1.25\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

HandsEase 3.175mm Flex Shaft adapter Attachment Flexible Power Drill Extension Cable Chuck for Dremel Rotary Grinder Woodworking Tools with Wrench Gold

  • Dremel flex shaft ergonomic pen design with smooth metal surface makes easy, comfortable carving, sanding and polishing, especially for a long time....
  • HandsEase flex extension no need to match the specifications of the electric grinder interface. As long as your electric grinder or electric drill can....
  • The flex shaft installation is convenient and simple, only need the connector handle be clamped to the electric grinder..
  • The flex shaft connector needs to be connect by electric grinder.(This flex shaft does not have a machine, please choose another machine)..
  • Rotary tool flex shaft can used with polishing kits, drill bits, wire brushes, countersinks, flap wheels, mounted stones and grinding wheels..
Check Stock