Reviews Shaft Hub Connection

The ROP Shop Pack of 4 Trailer Axle Kits with 4 on 4 Bolt Idler Hub & 1 Round BT8 Spindle

  • Replacement (Pack of 4) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (4) Idler Hub with Lug Nuts, (4) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (8) Inner/Outer Bearings, (4) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (4) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

The ROP Shop (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

The ROP Shop (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (8) Idler Hub with Lug Nuts, (8) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (16) Inner/Outer Bearings, (8) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (8) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

2Pairs ShareGoo Front & Rear Steel Drive Shaft Transmission Axle Compatible with Traxxas Slash 4X4 Nitro Rustler VXL Stampede 4X4 1/10 RC Car Truck Silver

  • The front and rear drive shaft compatible with Traxxas Slash 4X4 / Platinum / Ultimate / VXL 4x4 4WD Hoss 4X4 VXL Rustler 4X4 VXL Stampede 4X4 VXL....
  • The slash drive shaft are made of high quality steel material ,the hex wheel hub is made of aluminum alloy,durable in use..
  • Shaft Length Range:110mm-140mm/4.33''-5.51''.
  • Hex Wheel Hub Color:Blue/Silver(Optional).
  • Upgrades parts,designed for lasting performance,improves the overall performance of your rc car..
  • Package includes 2Pcs universal front drive shaft and 2Pcs rear drive shaft & 4Pcs wheel hex hub.The built-in anti-separtion design, reduce the....
Check Stock

Titan Attachments Auger Bit Repair Hub 2' Female Hex 5/8' and 3/4' Pin Holes

  • ... to excessive stress or poor construction. Our repair hub helps reduce the stress that occurs during drilling, making for a much stronger drive overall. Use it to fix your worn or broken hex hub connections for your auger or extension..
  • FEMALE CONNECTOR: This repair hub set is designed to receive any 2inch hex drive shaft. It is compatible with either 5/8" or 3/4" pin holes. This repair hub makes up the female component, so it will connect to male pieces of hardware. It can make a useful and helpful tool in your toolbox. Add it to your tool kit supplies and accessories today!.
  • STRONG STURDY CONSTRUCTION: At Titan, we dont mess around when it comes to making highquality products, and this repair hub is no exception. Using expert craftsmanship and superior materials, this repair hub offers the best quality possible. Its made from cast alloy, making it a strong and durable piece of hardware..
  • EASY INSTALLATION: Our repair hub is designed for welding onto 2inch industrial tubing. With its multihole design, installing the repair hub is a piece of cake. Simply pull out your welding supplies and get to work. In no time, youll have an upgraded auger bit that will last you for years to come..
  • SPECIFICATIONS: This repair hub kit weighs approximately 11 lbs. It has....
Check Stock

Lovejoy 1350 Series Shaft Locking Device, Inch, 2\ shaft diameter, 3.150\ Outer Diameter of Shaft Locking Device, 1870 ft-lb Maximum Transmissible Torque

  • Shaft locking device for connecting a hub to a shaft in power transmission applications.
  • Screw tension creates interference fit for zero backlash.
  • High contact pressure for transmitting greater torque.
  • Self-centering for concentric tightening.
  • Axial hub can move during clamping for positioning shaft.
Check Stock

Lovejoy 1350 Series Shaft Locking Device, Metric, 85 mm shaft diameter x 125mm outer diameter of shaft locking device, 6033 ft-lb Maximum Transmissible Torque

  • Shaft locking device for connecting a hub to a shaft in power transmission applications.
  • Screw tension creates interference fit for zero backlash.
  • High contact pressure for transmitting greater torque.
  • Self-centering for concentric tightening.
  • Axial hub can move during clamping for positioning shaft.
Check Stock

Lovejoy 1350 Series Shaft Locking Device, Metric, 60 mm shaft diameter x 90mm outer diameter of shaft locking device, 2091 ft-lb Maximum Transmissible Torque

  • Shaft locking device for connecting a hub to a shaft in power transmission applications.
  • Screw tension creates interference fit for zero backlash.
  • High contact pressure for transmitting greater torque.
  • Self-centering for concentric tightening.
  • Axial hub can move during clamping for positioning shaft.
Check Stock

Lovejoy 1350 Series Shaft Locking Device, Metric, 65 mm shaft diameter x 95mm outer diameter of shaft locking device, 2265 ft-lb Maximum Transmissible Torque

  • Shaft locking device for connecting a hub to a shaft in power transmission applications.
  • Screw tension creates interference fit for zero backlash.
  • High contact pressure for transmitting greater torque.
  • Self-centering for concentric tightening.
  • Axial hub can move during clamping for positioning shaft.
Check Stock

Lovejoy 1900 Series Shaft Locking Device, Metric, 12 mm shaft diameter x 18mm outer diameter of shaft locking device, 41 ft-lb Maximum Transmissible Torque

  • Shaft locking device for connecting a hub to a shaft in power transmission applications.
  • Screw tension creates interference fit for zero backlash.
  • High contact pressure for transmitting greater torque.
  • Self-centering for concentric tightening.
  • Expands to fill gap between shaft and hub for easy installation and removal.
Check Stock