Reviews Setting Tool For Anchors

AKKTOL Hollow Plaster Wall Drywall Anchor Setting Tool with 35 PCS Molly Bolts in 7 Sizes Heavy Duty Storage Box Included

  • Perfect Kit: Comes with a hollow wall anchor setting tool that perfectly works with M3/M4/M5/M6/M8 Molly Bolts and 35pcs molly bolts in 7 sizes: M4x32mm,M4x46mm, M4x60mm,M5x37mm,M5x52mm, M5x65mm,M6x52mm, intended for use on 0.12”-1.52" thin or hollow walls such as drywall, plasterboard, and other board materials. All are packed in a durable plastic box, convenient for your use and storage..
  • Easy to Use: With this tool, you just drill the hole, drive the anchor into the drywall, back the screw out about 1/4", mount the tool and squeeze. The tool ratchets and pulls the screw out, expanding the anchor perfectly..
  • Strong & Reliable Connection: Made of zinc-plated carbon steel, the largest of these sleeve-type dry wall anchors will safely hold items up to 50 pounds, the smallest anchors hold up to 18 pounds and the medium-size anchors hold up to 25 pounds. You’ll find these mollies suitable for hanging coat racks, mirrors, and other medium-weight items..
  • Durable Setting Tool: This hollow wall anchor setting tool is made of 2.5mm thickened REINFORCED CARBON STEEL with heat treatment which protects against corrosion and resists to deformation. With ergonomic type shape non-slip grips, protects you from getting hurt when using it..
Check Stock

BoltHold - SP12-38 Zinc Plated Steel Asphalt Anchor (5/8\ x 12\) - with 1\ Hex Bolt & Washer - Chemical Anchors - for Installation of Sheds, Carports, Bike Racks, & More - 2000 lb Pull Rated - 6 PK

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

30 pcs Molly Bolts, M6*52 Metal Drywall Anchors, Zinc Plated Steel Molly Bolt for Plaster Walls, Hollow Door Anchor (M6*52)

  • Metal hollow wall anchor: include 30pcs M6*52 molly bolts heavy duty dry wall anchors, it's screw diameter is about 6mm/0.23inch, anchors length is about 52mm/2.04inch, and fits for 18-28mm thick board..
  • Sturdy and durable: M6*52 plaster wall anchors is made of high-density carbon steel, provides great load-bearing capacity. The surface is galvanized for better corrosion and rust prevention..
  • Easy to install: with the anchor setting tool, it's more easily to open the support bracket, and each bracket is evenly stressed to provide a good load-bearing capacity, providing a reliable anchoring effect.
  • Multi-purpose: M6*52 dry wall anchors can be widely used in drywall, hollow block, plaster, tile, perfect for installing light fixtures such as lamps, curtain rods, photo frames, coat racks, power switches..
  • Product recommendation: to achieve better installation results, could use FOREVTL professional drywall anchor setting tool, it is made of thickened REINFORCED CARBON STEEL, anti-corrosion and resistant to deformation at the same time, 6.9 inch long, with spring reset design, better labor-saving and easier to use, easily finish the nailing work by using one hand..
Check Stock

Concrete Drop in Anchors 304 Stainless Steel 1/4 -20 x 1 Qty 1000

  • 1/4"-20 Drop-in anchors are female (internal) threaded concrete anchors, typically installed overhead that run flush with the surface of concrete or stone..
  • Used in flush-mount applications in solid base materials..
  • These anchors are installed crimped side down in a pre-drilled hole..
  • Concrete drop in anchors require a setting tool for proper installation..
  • Corrosion resistant and durable, resists oxidizing and rust, but can tarnish over time..
Check Stock

Concrete Drop in Anchors 304 Stainless Steel 3/8 -16 x 1-9/16 Qty 1000

  • 3/8"-16 Drop-in anchors are female (internal) threaded concrete anchors, typically installed overhead that run flush with the surface of concrete or stone..
  • Used in flush-mount applications in solid base materials..
  • These anchors are installed crimped side down in a pre-drilled hole..
  • Concrete drop in anchors require a setting tool for proper installation..
  • Corrosion resistant and durable, resists oxidizing and rust, but can tarnish over time..
Check Stock

Stainless Steel Concrete & Stone Drop in Female Expansion Anchors with Setting Tool 1/4 -20 x 1 Qty 20

  • 304 Stainless Steel Drop In Masonry Anchors with Matching Setting Tool.
  • Each pack contains one set tool designed to set the size of anchor.
  • Corrosion and rust resistant 304 Stainless Steel Drop In Anchors.
  • Installed crimped side down in a pre-drilled hole, then set with included tool.
  • Internal threads to anchor fixtures to concrete with bolts or machine screws.
Check Stock

Simpson Strong-Tie DIABST37 Drop-In Anchor Hand Setting Tool for 3/8

  • For use with Simpson Strong-Tie Drop-In models DIAB37 and DIABL37.
Check Stock

TOVOT 77PCS Wall Anchor Setting Tool Heavy Duty Hollow Wall Anchor Tool with 5 Sizes Molly Bolts Hollow Drive Wall Anchor Screw Kit (M4 M5 M6)

  • 【Practical Anchor Tool】: The setting tool with semi-automatic design can well finish the work of nailing bolts. The tool can be more comfortable with non-slip rubber material handle, and suitable for different types of bolts, heavy duty and reliable..
  • 【Widely Applications】: The setting tool set can be used as a fixed connection on hollow walls, plasterboard, and wood panels, suitable for mounting curtains, hanging pictures, and fixing shelves. The structure of the bolt is stable, heavy duty and not easy to break..
  • 【High-Quality】: The material of the wall anchor setting tool is  zinc plated carbon steel, which is water-resistant and highly hard, not easy to rust and deform by long term use..
  • 【Package Content】: The kit contains 1 metal hollow wall anchor tool, 76pcs, 5 seizes carbon steel molly bolts: 20pcs×M4×32mm, 20pcs×M4×38mm, 12pcs×M5×52mm, 12pcs×M6×52mm, 12pcs×M6×65mm..
  • 【Installation】: Equipped with anchors setting tool, easy to use and save time. Sufficient quantity and rich size for interior decoration use, plastic handheld work box, easy to car....
Check Stock

Heavy Duty Metal Setting Tool, Paick Hollow Wall Metal Cavity Anchor Plasterboard Fixing

  • HIGH GRADED SETTING TOOL - This hollow wall anchors gun has a high strength steel body with drop forged carbon steel upper handle. Thicker steel & chromium alloy wrench ensure greater durability and longer lifetime..
  • ONE-HANDED OPERATION - Heavy duty metal setting tool size: approx. 6.88" x 2.75" x 0.98". Small but powerful, it can work perfectly in one-handed operation. With ergonomic type shape non-slip grips, protects you from getting hurt when using it..
  • HOW IT WORK - For setting cavity wall fixings into hollow stud walls accurately and quickly. Place Anchor into pre-drilled hole, attach setting tool and squeeze trigger..
  • WIDELY APPLICATIONS - Perfectly works with M3/M4/M5/M6 Molly Bolts for cavity anchor plasterboard fixing, widely used in drywall, hollow block, plaster, tile, perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches..
  • PACKAGE CONTENT - In this kit, it include a heavy duty gun with 5 size of 4x32mm, 4x60mm, 5x52mm, 5x65mm, 6x52mm total 18pcs molly bolts, convenient for your use and storage..
Check Stock

Simpson Strong-Tie DIABST37-SDS Drop-In Anchor SDS+ Power Setting Tool for 3/8

  • SDS-plus shank power setting tool for DIAB anchors.
  • For use with Simpson Strong-Tie Drop-In models DIAB37 and DIABL37.
Check Stock