Reviews Servo To Ethernet Converter Board

15 Pieces Servo Extension Cables Servo Extension Male to Female RC Servo Extension Cord Wire Cable Compatible with RC JR Futaba RC Car Airplanes (3.9 Inch,5.9 Inch,11.8 Inch,19.7 Inch,23.6 Inch)

  • Wide application: these servo extension s are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also nice for remote control car, RC car and more.
  • Appropriate sizes: the servo extension cord measures approx. 3.9 Inch, 5.9 Inch, 11.8 Inch, 19.7 Inch, 23.6 Inch in length, different size for your use, the color is black and red.
  • Package includes: this package includes 15 pieces of male to female servo extension cables, enough quantity for you to use and replacement, providing more convenience for you.
  • Feature: this male to female servo extension cord featured with female connector on one side, and male connector on the other side, can be connected to the receiving set and steering engine.
  • Useful function: the servo extension wire is suitable for jumping from board to board, or can be applied to control panel cable remote control, which is male to female.
Check Stock

Cable Matters HDMI Extender Balun - Wall Mount HDMI Over Ethernet Extender with TCP/IP Support for 1-to-Many Setup 1080p 60Hz up to 328 Feet (100m) - Support Local Monitor Loop-Out

  • Extend any audio/video HDMI connection between a computer, Blu-ray player, media streamer, or gaming console to a HDTV, monitor or projector over a single Cat 6 UTP/STP cable with this HDMI to Ethernet adapter converter.
  • HDMI over Cat5e/Cat6 cabling operates up to 328 feet.
  • HDMI Balun Extender boxes are surface mountable with included brackets and screws.
  • The HDMI over Ethernet extender comes with bonus 2-Pack of High Speed HDMI cables.
  • Connect the HDMI Ethernet extender directly with a single cable or through a dedicated unmanaged network switch over Cat 6 cabling.
  • Do not connect through a LAN or router with other data traffic.
  • Connect up to 8 additional displays by adding Receiver Boxes (sold separately) through an unmanaged, dedicated Gigabit Ethernet network switch without QoS such as the TP-LINK TL-SG1005D Gigabit Desktop Switch.
  • Lab tested with the TRENDnet 8-Port Unmanaged Gigabit Switch, TEG-S81g.
  • Control a DVD player or other HDMI video source from a remote location with the included IR cables that forward commands over a dedicated DDC channel for convenience and security.
  • The Ethernet to HDMI adapter converter is compatible with HDCP compliant equipment for viewing copy protected content and integrating with HDMI switch, splitter, or matrix e....
Check Stock

BotBrain Robotics Control Board

  • Basic Stamp microprocessor, the board uses sensor inputs, a program, and servo outputs to operate a robot using the Parallax pBasic language.
  • Features include 8 sensor inputs and 5 servo outputs, all with polarized connectors as well as a built-in piezo "speaker".
  • Holes on side on the side of the board bolt to Merkur parts.
Check Stock

StarTech.com Multimode (MM) SC Fiber Media Converter for 10/100/1000 Network - 550m Range - Gigabit Ethernet - 850nm - Full Duplex (MCMGBSCMM055)

  • ETHERNET OVER FIBER EXTENSION: Use this fiber media converter to convert and extend a 1000Mbps Gigabit Ethernet connection up to 550m / 1804ft over Multimode SC fiber on 1000BASE-SX networks..
  • ADVANCED FEATURES: This SC fiber media converter provides a switch supporting the Link Fault Passthrough (LFP) function, LED indicators for simple monitoring and supports a full duplex operation..
  • PLUG AND PLAY: Designed for ease of use, this copper to fiber media converter provides a quick and easy setup. It can be used as a standalone device or mounted to a wall..
  • MAXIMUM DURABILITY: Built to withstand harsh environments, this rugged media converter has a durable metal housing, and has an operating temperature range of 0°C-50°C (32°F-122°F)..
Check Stock

9 Pieces JST Y Connector 3 Pin JST Plug Splitters Servo Extension JST Male to Female RC Servo Extension Cord Wire Cable Compatible with RC JR Futaba RC Car or Airplanes (Mixed Style)

  • Package includes: you will 9 pieces of servo extension cord, 3 pieces of male JST to female JR (Futaba) cable, 3 pieces of male to 2 female Y harness, 3 pieces of male to 3 female Y harness.
  • Abundant quantity and diverse styles that can meet your various needs.
  • Appropriate sizes: the servo extension cord measures approx. 15 cm/ 5.9 inches in length, universal size for your use, the color is white, black and red.
  • Extensive usages: these JST male to female are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also nice for remote control car, RC car and more.
  • Well made: JST connector is made of quality PVC material, with good insulation and flame retardant.
  • The interior is made of tinned copper, which has a good transmission and low resistance.
  • Useful function: the servo extension wire is suitable for jumping from board to board, or can be applied to control panel cable remote control unit, which is male to female.
Check Stock

10 pcs 3.93inch JR Style Servo Extension Cable Lead Wire - 3-Pin JR Plug Male to Male RC Servo Wire Extension Cord

  • 3-Pin JR plug male to male connector servo extension lead wire cable..
  • There is a 3 pin JST RE connector on each end. This is a simple 3 wire cable. Ideal for jumping from board to board, or something else..
  • Practical range: For Airplane, Helicopter, Quad co-pterter , Multi-coater RC car servo connection or receiver connection..
  • Packaging quantity ：10 Pcs * 10cm JR 3pin male to male plug servo extension cables wires cords leads..
Check Stock

15 Pcs Servo Extension Cable JST Y Connector 3 Pin JST Plug Splitters Male to Female Servo Adapter JST Extension Servo Wire Connector Compatible with RC JR Futaba RC Car or Airplanes, 3 Styles

  • You Will Get: the package comes with 15 pieces of servo extension cables, including 5 pieces of male JST to female JR (Futaba) cable, 5 pieces of male to 2 female Y harness, 5 pieces of male to 3 female Y harness, sufficient quantities and multiple styles can satisfy your different using needs.
  • Proper Size: the servo connector is about 15 cm/ 5.9 inches in length, suitable size for your to use, with colors of white, black and red.
  • Wide Application: these JST plug splitters are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also suitable for remote control car, RC car and so on, providing a lot of usages for you.
  • Nice Craftmanship: the JST plug connector is made of quality PVC material, which has good insulation and flame retardant, and the interior is made of tinned copper, featured a good transmission and low resistance performance, you can rest assured to use it.
  • Practical Function: the servo wire connector can be applied for jumping from board to board, or nice to control panel cable remote control part that is male to female.
Check Stock

MakerFocus PWM Servo Motor Driver IIC Module 16 Channel PWM Outputs 12 Bit Resolution I2C Compatible with Raspberry Pi 4 3B+ 3B Zero/Zero W/Zero WH and Jetson Nano

  • Note: The Raspberry Pi and Servo in the photo are not included. User Manual: Please get the link from the operation guide below.
  • Note: 1.If you only connect 5V power supply to USB interface, servo cannot be driven.
  • 2.You should connect higher power supply for higher-power servo.
  • 3.Make sure servo are connected properly, otherwise they will not move..
  • Servo Motor Driver: You may have tried to control a robotic arm or a hexapod walker by using the Raspberry Pi, but finally get frustrated due to the limited number of PWM outputs and the jittering servo. Now you get a new option to bring your ideas to life, we prepare this useful Servo Driver Board for you..
  • Raspberry Pi connectivity, compatible with Raspberry Pi 4 3B+ 3B 2B+ 2B Zero/Zero W/Zero WH and Jetson Nano..
  • Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales).
  • Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal..
Check Stock

Gigabit Ethernet Multi-Mode LC Fiber Media Converter (SFP SX Transceiver Included), up to 550M, 10/100/1000Base-Tx to 1000Base-SX

  • Seamless Conversion of Copper to Fiber – This media converter kit includes a multimode 1000BASE-SX SFP module(850nm), which enables you to convert 1000BASE-SX fiber to 1000Base-T copper media or vice versa.
  • Extend Transmission Distance – By using this ethernet fiber media converter, you can extend link distance up to 550 metres/ 1804 ft via OM3/OM4 multimode fiber (MMF).
  • Plug and Play – Hot-swappable design makes this fiber converter easy to install and troubleshoot for newbies.
  • 1.25G Gigabit Connection – 10/100/1000Mbps Auto-Negotiation RJ45 Port Supporting Auto-MDI/MDIX and Half-Duplex / Full-Duplex Transfer Mode.
  • What You Get – 1* Gigabit Ethernet SFP to RJ45 media converter.
  • 3-year Warranty, Free Lifelong Technology Support.
Check Stock

StarTech.com Singlemode (SM) LC Fiber Media Converter for 1Gbe Network - 10km - Gigabit Ethernet - 1310nm - with SFP Transceiver (ET91000SM10)

  • ETHERNET OVER FIBER EXTENSION: Use this full / half duplex fiber media converter to convert and extend a Gigabit Ethernet connection up to 10km (6.2mi) using singlemode LC fiber cable..
  • INCLUDES SFP: For added convenience, this IT-grade network fiber media converter includes an SFP transceiver (mini gbic), enabling an 1310nm LC single mode Gigabit fiber connection..
  • MAXIMUM DURABILITY: Built to withstand harsh environments, this rugged media converter has a durable steel housing, and has an operating temperature range of 0°C-50°C (32°F-122°F)..
Check Stock