Reviews Servo To Can Converter Board

MakerFocus PWM Servo Motor Driver IIC Module 16 Channel PWM Outputs 12 Bit Resolution I2C Compatible with Raspberry Pi 4 3B+ 3B Zero/Zero W/Zero WH and Jetson Nano

Note: The Raspberry Pi and Servo in the photo are not included. User Manual: Please get the link from the operation guide below.
Note: 1.If you only connect 5V power supply to USB interface, servo cannot be driven.
2.You should connect higher power supply for higher-power servo.
3.Make sure servo are connected properly, otherwise they will not move..
Servo Motor Driver: You may have tried to control a robotic arm or a hexapod walker by using the Raspberry Pi, but finally get frustrated due to the limited number of PWM outputs and the jittering servo. Now you get a new option to bring your ideas to life, we prepare this useful Servo Driver Board for you..
Raspberry Pi connectivity, compatible with Raspberry Pi 4 3B+ 3B 2B+ 2B Zero/Zero W/Zero WH and Jetson Nano..
Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales).
Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal..

Basic Stamp microprocessor, the board uses sensor inputs, a program, and servo outputs to operate a robot using the Parallax pBasic language.
Features include 8 sensor inputs and 5 servo outputs, all with polarized connectors as well as a built-in piezo "speaker".
Holes on side on the side of the board bolt to Merkur parts.

3-Pin JR plug male to male connector servo extension lead wire cable..
There is a 3 pin JST RE connector on each end. This is a simple 3 wire cable. Ideal for jumping from board to board, or something else..
Practical range: For Airplane, Helicopter, Quad co-pterter , Multi-coater RC car servo connection or receiver connection..
Packaging quantity ：10 Pcs * 10cm JR 3pin male to male plug servo extension cables wires cords leads..

buck voltage converter input voltage range DC 6-55V, output voltage range 0-50V, output current range 0-5A, output power range 0-250W, output voltage resolution 0.01V, output current resolution: 0.001A..
Wireless & Wire Connection: it can connect with computer by Bluetooth, in the distance range of 5 meters.
or can connect by the USB communication board. User can remote monitor, voltage setting and current setting can be operated quickly..
Quick Operation: it is easy to operate converter with this, you can do voltage setting and current setting as quickly as possible.
you can also set it to cut off output when over voltage, over current and over power..
LCD Display: Built with color LCD display, it will be convenient for you to review preset voltage, input voltage, output voltage, preset current, output current, output power and brightness of LCD..
Package Including: 1x DC adjustable constant voltage power supply converter.

10CM Male to Male JR Plug Servo Extension Lead Wire Cable.
Great for jumping from board to board or just about anything else..
There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers..
Length:100mm Type:JR Plug Servo Extension wire (Male to Male).

This expansion board can directly stack on the controller R3 board and can drive up to 16 servos.
Uses I2C input, just occupy A4 and A5 interface on the control board.
Contains PCB double sided holes, can direct to solder with components to build up prototyping circuits.
Servo power supply independent V + input up to 6V.
How to use: Search for "keyestudio wiki KS0258" in Google Chrome to get the wiki online tutorial for this product..

Used for RC cars trucks airplanes helicopters rc boat servo connection, receiver connection and flight control board..
This servo Y-cable allows you to control two servos with one radio channel..
Material: 22AWG silicone wire.Wire Length: 7CM/2.75".
3Pin wire cable.Male JR plug to 2 Female JR plug Y Harness cable..
Pack of 6 JR style servo splitter cable,unique design, professional quality JR style connectors..

MKS servo42C is a product developed by MKS to meet market demand. The closed-loop motor uses the motor's rotation angle feedback to the drive circuit to detect whether every step that should be taken has been taken to prevent losing steps. If a closed loop occurs, the motor will make up or lose steps through the feedback information, and the blue LED on the closed loop module will light up..
Support 1-256 subdivision,odd subdivision (such as 11 subdivision) is also available. And support motors with 0.9 degree or 1.8 degree. Maximum speed 1000RPM. With usart interface, you can connect the computer by serial port, for parameter adjustment and query..
Position /speed/torque closed-loop, it can run at high speed without losing step. Easy to install and wire. The max printing speed can reach 150-180mm/S. Field-Oriented control, low noise, low vibration and low calorific. 4 Half bridge driver with 8 MOSFET, high operating efficiency. 14Bits magnetic encoder, high angle resolution..
Compatible with Gen L SGen L, SKR 2 / V1.4 Turbo BTT Octopus V1.1 Motherboard and other board which is seperated with drivers, that means drivers is not soldered onto the board.
Package: 1*MKS SERVO42C(include motor) + 1*Adapter board(MKS APT) + 1*60cm 6pin Data Cable . (User metho....

... designed with bright 4-digit LED to display output voltage, current at default simple mode. By manual setting to fully functional mode, the stabilizer would show more parameters, such as power and capacity. Also the board is equipped with working indicators to show real-time working status..
Data Save --- The boost converter can save up to 10 sets of parameter settings. It’s easy to save and very convenient to call out parameters at any time you would like to..
Wide Application --- The step up power converter does great for wind power, DC generators, solar panels to charge battery, and it also can be made as a boost power supply to power devices..
Notes --- 1) No big difference between input and output voltage. Otherwise the power loss will increase then the actual output may not be as what expected.
2) Actual output current is mainly decided by the load. Converter can only set a limit on output current.
3) When powering high-power appliances, please turn off the automatic output function, correctly connect the converter, and then press the "OK" button to output. After the voltage rises to the set voltage, turn on the appliances..