Reviews Servo To Bluetooth Converter Board

Bluetooth Serial Port Transceiver Baseboard, HC-05 Wireless Bluetooth Transceiver Module, Mini Low Power Consumption

  • Enhanced data rate (EDR) conforms to the 2Mbps and 3Mbps modulation modes of the V2.0.E.2 specification..
  • Support Bluetooth connection through AT command, set baud rate, password, save parameters after setting parameters..
  • Bluetooth UART RS232 serial converter module for easy transfer of UART data..
  • On board 3.3V regulator chip, ROHS compliant, compact size..
  • Full speed Bluetooth operation, support for full Piconet and Scatternet..
Check Stock

ACEIRMC ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MP + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire

  • ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MPcompatible for Arduino, Support Image WiFi Upload and TF Card.
  • Bluetooth: Bluetooth 4.2 BR/EDR and BLE standard.
  • Camera WiFi + Bluetooth Module 4M PSRAM Dual-core 32-bit CPU Development Board with OV2640 2MP Camera Module + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire.
  • FTDI USB Serial Adapter comes with the FT232RL chip and uses both 3.3V and 5V operating voltage. Adapter Logic-level can be set via jumpers on the board, which makes simple to connect to your controller. USB power has over current protection, using 500MA self-restore fuse..
  • This module supports interfaces such as UART / SPI / I2C / PWM / ADC / DAC.
Check Stock

BotBrain Robotics Control Board

  • Basic Stamp microprocessor, the board uses sensor inputs, a program, and servo outputs to operate a robot using the Parallax pBasic language.
  • Features include 8 sensor inputs and 5 servo outputs, all with polarized connectors as well as a built-in piezo "speaker".
  • Holes on side on the side of the board bolt to Merkur parts.
Check Stock

FURITEK Iguana 20A/40A Brushed ESC for AXIAL SCX24 with Bluetooth Combo

  • The FURITEK IGUANA esc is designed to work with BOTH stock brushed motor and sensored/sensorless brushless motors of your favorite on the Axial SCX24 crawlers..
  • Designed with FOC (Field-oriented control) technology, it provides insane slow speed with powerful stable torque, low noise, high efficiency, and has a high-speed dynamic response..
  • And with bluetooth module option, you can run telemetry and all amazing parameters on smart phone apps..
  • The difference between this IGUANA esc and TEGU Main Board for Axial SCX24 Crawler is that the TEGU main board includes servo out for extra application and LED control capability which the IGUANA does not have. The IGUANA also has smaller BEC than the TEGU..
  • - Support sensorless brushless DC and brushed DC motor (config via app, default is brushed).
Check Stock

9 Pieces JST Y Connector 3 Pin JST Plug Splitters Servo Extension JST Male to Female RC Servo Extension Cord Wire Cable Compatible with RC JR Futaba RC Car or Airplanes (Mixed Style)

  • Package includes: you will 9 pieces of servo extension cord, 3 pieces of male JST to female JR (Futaba) cable, 3 pieces of male to 2 female Y harness, 3 pieces of male to 3 female Y harness.
  • Abundant quantity and diverse styles that can meet your various needs.
  • Appropriate sizes: the servo extension cord measures approx. 15 cm/ 5.9 inches in length, universal size for your use, the color is white, black and red.
  • Extensive usages: these JST male to female are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also nice for remote control car, RC car and more.
  • Well made: JST connector is made of quality PVC material, with good insulation and flame retardant.
  • The interior is made of tinned copper, which has a good transmission and low resistance.
  • Useful function: the servo extension wire is suitable for jumping from board to board, or can be applied to control panel cable remote control unit, which is male to female.
Check Stock

10 pcs 3.93inch JR Style Servo Extension Cable Lead Wire - 3-Pin JR Plug Male to Male RC Servo Wire Extension Cord

  • 3-Pin JR plug male to male connector servo extension lead wire cable..
  • There is a 3 pin JST RE connector on each end. This is a simple 3 wire cable. Ideal for jumping from board to board, or something else..
  • Practical range: For Airplane, Helicopter, Quad co-pterter , Multi-coater RC car servo connection or receiver connection..
  • Packaging quantity ：10 Pcs * 10cm JR 3pin male to male plug servo extension cables wires cords leads..
Check Stock

15 Pcs Servo Extension Cable JST Y Connector 3 Pin JST Plug Splitters Male to Female Servo Adapter JST Extension Servo Wire Connector Compatible with RC JR Futaba RC Car or Airplanes, 3 Styles

  • You Will Get: the package comes with 15 pieces of servo extension cables, including 5 pieces of male JST to female JR (Futaba) cable, 5 pieces of male to 2 female Y harness, 5 pieces of male to 3 female Y harness, sufficient quantities and multiple styles can satisfy your different using needs.
  • Proper Size: the servo connector is about 15 cm/ 5.9 inches in length, suitable size for your to use, with colors of white, black and red.
  • Wide Application: these JST plug splitters are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also suitable for remote control car, RC car and so on, providing a lot of usages for you.
  • Nice Craftmanship: the JST plug connector is made of quality PVC material, which has good insulation and flame retardant, and the interior is made of tinned copper, featured a good transmission and low resistance performance, you can rest assured to use it.
  • Practical Function: the servo wire connector can be applied for jumping from board to board, or nice to control panel cable remote control part that is male to female.
Check Stock

MakerFocus PWM Servo Motor Driver IIC Module 16 Channel PWM Outputs 12 Bit Resolution I2C Compatible with Raspberry Pi 4 3B+ 3B Zero/Zero W/Zero WH and Jetson Nano

  • Note: The Raspberry Pi and Servo in the photo are not included. User Manual: Please get the link from the operation guide below.
  • Note: 1.If you only connect 5V power supply to USB interface, servo cannot be driven.
  • 2.You should connect higher power supply for higher-power servo.
  • 3.Make sure servo are connected properly, otherwise they will not move..
  • Servo Motor Driver: You may have tried to control a robotic arm or a hexapod walker by using the Raspberry Pi, but finally get frustrated due to the limited number of PWM outputs and the jittering servo. Now you get a new option to bring your ideas to life, we prepare this useful Servo Driver Board for you..
  • Raspberry Pi connectivity, compatible with Raspberry Pi 4 3B+ 3B 2B+ 2B Zero/Zero W/Zero WH and Jetson Nano..
  • Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales).
  • Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal..
Check Stock

Digital to Analog + Bluetooth Receiver USB Music Player Digital to Analog Converter with Headphone Amplifier Built-in Bluetooth V5.0 Receiver

  • Digital to analog audio converter：Convert optical/coaxial Toslink digital pulse code modification (PCM) and line pulse code modification (LPCM) audio signals to analog (RCA and AUX 3.5mm Jack) audio simultaneously..
  • Volume control design：Digital to Analog Converter comes with its own professional volume control knob,which makes it super easy to adjust the output volume of both RCA and AUX.This supports the simultaneous play of both the speakers and headphones..
  • Supports all popular sample rates：Digital to Analog Converter accepts uncompressed digital audio as input with 192kHz/24bit,96kHz,48kHz,44.1kHz,32kHz as sample rates and provides electromagnetic-noise-free transmission..
  • Bluetooth：Digital to Analog Converter support Bluetooth 5.0 version. SBC,AAC decoder and signal distance up to 10 meters with Bluetooth antenna..
  • Compatibility：Digital to analog audio converter is specially designed for either home or professional audio signal switching. It converts coaxial, Toslink digital audio, stereo audio or Bluetooth signals to analog stereo audio signal. It is also a digital music player with USB Flash Drive input supporting MP3,WAV,APE,FLAC and WMA lossless formats..
Check Stock

LiNKFOR 192kHz Digital to Analog Audio Converter Bluetooth 5.0 Receiver DAC with Headphone Amplifier Optical to RCA/3.5mm Audio Output with Volume Control for HDTV Blu-ray Player TV Box

  • 【192kHz Digital to Analog Converter】 The bluetooth dac converts Coaxial, Toslink Digital audio or Bluetooth signal to Analog L/R and 3.5mm jack....
  • 【Wireless Bluetooth 5.0 Receiver】 The optical to rca converter adopts the latest QCC3003 Bluetooth version 5.0 lossless transmission technology.....
  • 【3.5mm Headphone Amplifier & Volume Control】 This dac converter supports 16-300Ω headphones, you can use it as a Hi-Fi amplifier. And it is....
  • 【Support PCM/LPCM Audio Signal】Optical/Coaxial input audio format: PCM / LPCM. Please set the audio format to PCM or LPCM before using. (NOTE: It....
  • 【What You Get?】1 x 192kHz Bluetooth DAC Converter.
  • 1 x Power Adaptor and 1 x User Manual. All LiNKFOR....
Check Stock