Reviews Serial Port Module

HiLetgo 2pcs HC-06 RS232 4 Pin Wireless Bluetooth Serial RF Transceiver Module Bi-Directional Serial Channel Slave Mode for Arduino

  • Works with any USB Bluetooth adapters, running in slave role: Pair with BT dongle. Led indicate Bluetooth connection status, flashing Bluetooth....
  • Core module uses HC-06, leads from the module interface includes VCC, GND, TXD, RXD, reserve LED status output pin, the microcontroller can be judged....
  • Small size, low power consumption,high sensitivity for send and receive. Bluetooth version: V2.0+EDR &Operating voltage: 3.3V &Host Interface:UART....
  • The module is mainly used for short-range data wireless transmission,such as Bluetooth wireless data transmission,Industrial remote control,....
  • Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port....
Check Stock

HiLetgo HC-06 RS232 4 Pin Wireless Bluetooth Serial RF Transceiver Module Bi-Directional Serial Channel Slave Mode for Arduino

  • Works with any USB Bluetooth adapters, running in slave role: Pair with BT dongle. Led indicate Bluetooth connection status, flashing Bluetooth connectivity, lit the Bluetooth connection and open a port Backplane.
  • Core module uses HC-06, leads from the module interface includes VCC, GND, TXD, RXD, reserve LED status output pin, the microcontroller can be judged by the foot state Bluetooth has connected KEY pin slave invalid..
  • Small size, low power consumption,high sensitivity for send and receive. Bluetooth version: V2.0+EDR &Operating voltage: 3.3V &Host Interface:UART &Storage Temperature:-40℃~+150℃&Signal coverage: 30ft &Item size: 4.3 * 1.6 * 0.7cm &Item weight: 3g..
  • The module is mainly used for short-range data wireless transmission,such as Bluetooth wireless data transmission,Industrial remote control, telemetry,Traffic, underground positioning, alarm,Smart home ect..
  • Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. Computer and peripheral devices..
Check Stock

HiLetgo 1602 LCD Keypad Shield 1602 LCD Expansion Shield Board Blue Backlight 4.5-5.5V for Arduino Duemilanove Robot

  • ☆ Premium Quality: Made of premium material, this lcd module display is sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
  • ☆ TFT LCD Serial Port Module : The lcd display module is a new 2.8 inch serial SPI color display module. Designed with one socket for sd card and PCB adapter for LCD.
  • ☆ Come With PCB Plate: With PCB plate (including power supply IC, SD), pcb display module is compatible with 5110 interface. Resolution: 128x160.
  • ☆ Support Analog & Hardware SPI: This tft display module supports analog SPI and hardware SPI, less I/O port need. It can be driven by 8051 / AVR / PIC /ARM/STM32. It can be driven with at least four IO.
  • ☆ What You Will Get: If you need the document to download, please contact us. We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care.
Check Stock

Dorhea 3PCS BLE 4.0 Bluetooth Module AT-09 for Ardu-ino CC2540 CC2541 BLE Serial Wireless Module Compatible with HM-10

  • The master-slave module has three functions of transparent transmission, remote control and PIO acquisition. It can be switched and set through the AT command set. It is easy to use the same as the Bluetooth serial port module you have used before, without changing the PCB and the lower computer program..
  • Support AT command, users can change the serial port baud rate, device name, pairing password and other parameters as needed, use flexible..
  • Support UART/I2C interface, and support SPP Bluetooth serial port protocol, has the advantages of low cost, small size, low power consumption, high sensitivity of sending and receiving, etc., only need to be equipped with a few peripheral components to achieve its powerful functions..
  • This module is mainly used in the field of short-distance data wireless transmission. It can be easily connected to the Bluetooth device of the PC, or the data between the two modules can be intercommunicated..
  • When the Bluetooth connection is not established, the baud rate, name, and pairing password can be set by the AT command. After the setting, the parameter is saved after power-off, and the Bluetooth connection automatically switches to the transparent transmission mode..
Check Stock

RedTagCanada SIM900 Quad Band GSM GPRS Quad-Band Modules 2G Shield Development Board for R3 Mega with Antenna for Arduino SCM & DIY Kits

  • Embedded TCP / UDP stack - allows you to upload data to a Web server | RTC supported | selectable serial port | Jac speakers and headphones.
  • Quad-Band 850/900/1800/1900 MHz - could work on GSM networks in all countries around the world, work with Uno Mega..
  • This is a new version (64M version), SMS support MMS: Multimedia message and Short Message Service - so it is possible to send small amounts of data over the network (ASCII or raw hexadecimal).
  • The shield allows you to get SMS, MMS, GPRS and audio via UART by sending AT commands (GSM 07.07, 07.05 and SIMCOM enhanced to commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module (They are all 2V8 logic) present on board..
  • Application: M2M (Machine 2 Machine) Applications.Remote control of appliances.Remote Weather Station or Wireless Sensor Network.Vehicle tracking system with a GPS module.Good to learn GSM / GPRS mobile phone development, control development of remote equipment, wireless meter reading, smart appliances, ultra long distance control, etc..
  • Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced.
  • Power jack - connected to external 4.8~5VDC power supply, Antenna interface - connected to external antenna, Serial port select - select either software s....
Check Stock

Carel Temperature Thermostat IR33F0AHA0 with Temperature Sensor Probe 115V / Technician Ready by Xiltek

  • With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect.
  • GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity,....
  • USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX....
  • If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will reply your....
Check Stock

Creality 3D Printer Part Limit Switch with Separate Package CNC for RAMPS 1.4 RepRap 3D Printer CR-10 10S,S4,S5,Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5 (Pack of 3)

  • 1.Upgrade the firmware by SD card. It is easy and convenient to operate.This display board has higher compatibility. Users can select two work modes,they are UART serial port screen mode and 12864 screen mode..
  • 2.Serial port screen mode supports two printing modes: SD card and U disk..
  • 3.Reserve WIFI port, and WIFI function is realized by external WIFI module.
  • 4.Reserve the extension port of filament breaking detection (FIL-DET).
  • Reserve the extension port of automatic shutdown after printing (PS-ON).
  • 5.2 sets of UART serial port extension ports are reserved for DIY use..
Check Stock

Treedix USB to TTL Converter CH340 Module 3.3V/5.5v Serial Converter Development Tool with Micro USB Adapter for Arduino

  • Serial Basic Breakout Board CH340G serial signal serial ic breakout development board usb micro b connector save space diy electronics projects micro b cable jumper wires.
  • Base on USB converter IC CH340G, there is a wide range of operating systems . You may need to install drivers the first time you connect the chip to your computer's USB port or when there are operating system updates..
  • The output voltage is 3.3v by default, there is a 3.3v signal, it can also be changed to 5V, changing to 5V will cause the board to output 5V and 5V signals on the VCC pin(3 .3v to 5V by a short circuit selection).
  • There are two LEDs on the board connected to TX (green) and RX (yellow) for faster viewing of serial traffic.
  • Suitable for: Arduino Pro Mini, our GPS module, cellular module and many other devices that use serial communication.
Check Stock

GPS Module Receiver,Navigation Satellite Positioning NEO-6M Arduino GPS Drone Microcontroller GPS Receiver Compatible with 51 Microcontroller STM32 Arduino UNO R3 with Antenna High Sensitivity

  • With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect.
  • GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity,....
  • USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX....
  • If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will reply your....
Check Stock

BIGTREETECH TFT35 V3.0 Graphic Smart Display Controller Board for 3D Printer Ramps 1.4 RepRap 3D Printer Can Select Two Work Modes

  • 1.Upgrade the firmware by SD card. It is easy and convenient to operate.This display board has higher compatibility. Users can select two work....
  • 2.Serial port screen mode supports two printing modes: SD card and U disk..
  • 3.Reserve WIFI port, and WIFI function is realized by external WIFI module.
  • 4.Reserve the extension port of filament breaking detection (FIL-DET).
  • Reserve the extension port of automatic shutdown after printing (PS-ON).
  • 5.2 sets of UART serial port extension ports are reserved for DIY use..
Check Stock