Reviews Serial Device Interface

Lantronix xDirect - Device server - 10Mb LAN, 100Mb LAN, RS-232, RS-422, RS-485 - AC 100/230 V - XDT4851002-01-S

Dual Serial Device Server: Cpu: Cortex-M4 120Mhz, Serial RS485 & RS232 to Ethernet Server, 2 Serial Ports: 1 Port is RS232, 1 Port is RS485, 1 RJ45 Ethernet Port. Support RS232 & RS485 Working at The Same Time..
Data Link Protocol: Ip£¬Tcp£¬Udp£¬Dhcp£¬Dns£¬Http£¬Arp£¬Icmp£¬Web Socket£¬Httpd Client..
Speed: 10 / 100 Mbps, Mdi / Mdix Cross Direct Automatic Switching, Baud Rate: Rs-232£º600Bps ~ 230. 4Kbps£¬Rs-485£º600Bps ~ 1Mbps.
1.5Kv Electromagnetic Isolation, Shell Isolation Protection.
Configure Via Web Browser or Virtual Com Software Interface.
Working Temperature: -40 ~ 85¡ãC, Power Consumption: 003c 1W..
What's in The Box: 1 x Dual Serial Device Server, 1 x 5V 1A Power Supply, 1 x Female to Female Serial Cable..

The GCAN-204 is a CAN to Modbus RTU Slave Converter with one Serial interface and one CAN interface. It allows user to connect some Modbus Master (for example: PLC, HMI, etc) with an existing CAN network. It has integrated isolation protection module and easier to install with DIN-rail..
CAN industrial automation control system.
The serial communication device is connected to CAN-bus.

RS232 USB to serial female adapter cable allows any PC to connect serial devices and programs that communicate through COM ports.
DB9 Serial cable to USB adapter is designed for connecting Serial devices such as DB9 equipped PCs, routers, GPS, Programming machine, barcode scanners, label writers, serial modems, digital cameras, card readers, palm PCs and digital organizers, etc.
6ft USB to serial cable with standard USB Type A Male to standard 9-pin DB9 Female RS-232 serial connector.
USB to RS232 adapter is with Prolific PL-2303 Chipset for widest possible compatibility with Windows 11, 10, 8, 7, XP, Vista, 2000, 98, MacOS8 or higher, Linux 2.4.0 and later, and other platforms..
Note that the interface is 9-pin RS232 Female socket, please make sure that your serial device with a 9-pin Male Port before purchasing this USB to serial port adapter with Prolific PL2303 chipset (NOT FTDI chip).

FTDI based USB to TTL Serial Cable are designed using the the standard FT232BL chipset.
Please note that this cable supports very low power devices-5V..
It can work with Raspberry Pi serial console.
UART interface IC device which handles all the USB signal and protocols.
What you will get is : 1 X USB to TTL serial cable.

Different Capacity for Choice: 64GB 32GB 16GB 8GB Memory Stick highly extend your PSP memory capacity, no need to worry about your PSP run out of memory to download your favorite games.
High Speed: Read speed is approximately 50MB per second. Write speed with 4-bit parallel transfer is approximately 5MB per second or 40MB per second in the case of optimized compliant host device. Write speed with 8-bit parallel transfer is approximately 15MB per second or 120MB per second in the case of optimized compliant host device.
Compatibility: Sony Playstation PSP All Versions (not recommend to use it on digital cameras).
Interface: 10-pin serial memory stick interface & 4-pin parallel.

1.5ft serial null modem serial cable (7 wire type and full handshaking) connects your computer to device with COM port RS-232 compatible interface.
Wired as a 9 pin serial port Null-Modem cord that 2-3, 4-6, 7-8 line are cross linked (TX,RX,RTS, CTS, DTR,DSR wires are connected).
standard shielded DE9 male RS232 cable with AL foil.
DB9 male to male connector on each end equipped with screws to ensure an easy and solid connection for stable serial cross data communication.
The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
1.5 feet short null serial adapter for hooking up PC laptop to some old RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.

1.5ft female to female serial null modem cable (7 wire type and full handshaking) connects your computer to device with COM port RS-232 compatible interface.
Wired as a 9 pin serial port Null-Modem cord that 2-3, 4-6, 7-8 line are cross linked (TX,RX,RTS, CTS, DTR,DSR wires are connected).
standard shielded DE9 rs232 cable female to femalewith AL foil.
DB9 female to female connector on each end equipped with screws to ensure an easy and solid connection for stable serial cross data communication.
The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
1.5 feet short null serial adapter f/f for hooking up PC laptop to some old RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.

DTECH DB9 serial cable female to female connects your computer to device with RS-232 compatible (COM port) interface.
RS232c cable 9 pin connector on each end equipped with screws to ensure an easy and solid connection for stable data communication.
10 feet DB9 extension cord is long enough for unites side by side.
the wires inside the cable are of 30AWG gauge and easy to solder to.
It is pin-to-pin wired as a DB-9 serial adapter Straight Through (pinout :1-1, 2-2, 3-3, 4-4,......, 8-8, 9-9, G-G).
10ft DE9 RS232 serial adapter cord for some old RS232C equipment like scanner, Modem, printer, plotter, switches, camera, barcode / embroidery machine, touchscreen, microcontroller, test equipment.

Support AT command, users can change the serial port baud rate, device name, pairing password and other parameters as needed, use flexible..
It adopts CC2541 chip of American TI Company, configures 256Kb space, and follows V4.0 BLE Bluetooth specification..
Input voltage: 3.3V/5V only needs a set of power supply..
This module supports UART interface and supports SPP Bluetooth serial port protocol..

9 pin male to male adapter connects your computer to device with RS-232 compatible (COM) interface (NOT VGA cable for computer to monitor).
Serial cable male to male DB9 connector on each end equipped with screws to ensure an easy and solid connection for stable data communication.
The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
It is pin to pin wired as a DE9 serial Straight Through cord (pinout :1-1, 2-2, 3-3, 4-4,......, 8-8, 9-9, G-G).
6 feet short serial adapter DB-9 cable for hooking up PC laptop to some old RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.