Reviews Sequence Controller

RGBZONE DC 5V-24V 12A RGB LED Controller with 17-Key RF Wireless Remote Control Dimmer for 5050 3528 5630 LED Strip Lights

  • Convenient LED controller kit--mini RGB controller + RF wireless remote.Tips.
  • Because the line order of each factory RGB light bar is not uniform, our controller line sequence is RGB..
  • Ultra slim design RF remote, Memory function..
  • Input voltage 5-24V, 3 output channels with 12A working current controller.
  • 1 controller matches with 1 RF remote, both enable you to control RGB strip.
  • 19 dynamic mode, 20 static colors, 5-level for speed..
Check Stock

Arturia KeyLab 49 Essential Universal MIDI Controller and Software

  • This bundle includes: 1 x Arturia KeyLab 49 Essential Universal MIDI Controller and Software 1 x Axcessables MID-203 Dual Midi Cable 5 pin to Same - 3 m. 1 x Yamaha FC4 - Piano Style Sustain Foot Pedal.
  • 2 monophonic step sequencers: Up to 64 steps per sequence.
  • Note, velocity and gate time settings per step.
  • 16-track drum sequencer (one track per pad).
  • Fully customizable for knobs, step buttons and velocity and pressure sensitive pads.
  • Send MIDI CC, note data, program changes.
  • 16 Projects, each with 162 sequences, 16 drum sequences and a controller map..
Check Stock

3-Axis 32-bit ARM Based CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling,Support 500W Spindle/NEMA23 Stepper Motor/Laser (A4988+Fan)

  • Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
  • Input voltage: 12-24VDC .CNC Router Machine Controller board.
  • Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
  • support 775 motor, 200W/300W/500W spindle.
  • support dual Y-axis use, three-axis and two-axis switching use.
  • support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
  • Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
  • Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
  • Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check Stock

Supermicro DDR2 667 LGA 775 Server Motherboards X7DWN+-O

  • CPU: Dual 771pin LGA Sockets Supports Intel 64-bit Quad-Core Xeon 5400/5300 Sequence/ Dual-Core Xeon 5200/5100 Sequence Processors, upto 3.4GHz.
  • Memory: 16x 240pin DDR2-800/667/533 FB-DIMMs, Dual Branch Memory Bus, ECC, Max Capacity 128GB.
  • Video: ATI ES1000 Graphics Controller w/ 32MB Video Memory.
Check Stock

ANNOYTOOLS ARM 32-bit 3-Axis CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling DRV8825 Standalone Driver,Support 500W Spindle/NEMA17/23 Stepper Motor/Laser Module

  • Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
  • Input voltage: 12-24VDC .CNC Router Machine Controller board.
  • Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
  • support 775 motor, 200W/300W/500W spindle.
  • support dual Y-axis use, three-axis and two-axis switching use.
  • support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
  • Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
  • Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
  • Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check Stock

BETMI Controller Paddles Back Button Attachment/Turbo Function FPS/Customization Mapping Buttons/Audio Jack for PS4 Playstation 4 Controller

  • 【BROAD COMPATIBILITY & SIMPLE OPERATION 】After testing, Back Button Attachment is compatible with 80% of the controller for PS4 on the market.can conveniently map the target buttons on the Paddles(M1, M2) ..
  • 【Burst Function】After mapping the target buttons to "M1 or M2", press "Turbo +M1 or M2" at the same time, "M1 or M2" will get the burst function, repeating it will cancel the function..
  • 【Simple Programming Function Setting】①Long press the SET button for 2 seconds,X light flashes quickly.②Press the M1 or M2 (Press once to switch once ), lights flashing slowly in sequence(The flashing sequence is ×, ○, △, □, R3, L3, R2, L2, R1, L1).③Just to long press the SET button for 5 seconds, the programming indicator LED will change from fast flashing to off, and the M1/2 function is cleared..
  • 【Wireless Design】No other tools are needed, just plug in the controller , and do some simple settings.(NOTE: The handle should also have programming and memory programming functions whenit is not connected to Bluetooth state and charging state.).
  • 【DESIGN FOR HANDS 】the unique paddles position design is more suitable for players with small hands and brings you more fun..
Check Stock

ECO-Worthy 30A Solar Charger Controller Solar Panel Battery Intelligent Regulator with Dual USB Port Auto 12/24V PWM Positive Ground…

  • [30A Solar Charge controller]: the solar charger controller compatibility with 12V 24V system. Discharge Current: 10A,build-in industrial micro controller, automatically manage the working of solar panel and battery in solar system. Dual USB output 5V/2.5A (max), to support mobile phone chargeing.
  • [Multiple Protection Functions]: ECO-WORTHY solar controller has short-circuit protection, open-circuit protection,reverse protection, over-load protection. Fully 3-stage PWM charge management, improve system efficiency and prolong the life span of the battery.
  • [Battery Type]: The charge regulator is suitable for lead-acid batteries, gel batteries and lithium phosphate batteries. For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically.
  • [LCD Display]: Comes with a display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, suitable for home, industrial, commercial etc..
  • [Easy to Install and Operate]: The charge controller should connect the battery first, then the solar panel, and finally the load! The disassembly sequence is contrary to the wiring order.Dual mosfet Reverse current protection, low heat production. ( N....
Check Stock

30A Solar Charge Controller, Solar Panel Charge Controller 12V 24V Dual USB Charge Regulator Intelligent, Adjustable Parameter Backlight LCD Display and Timer Setting ON/Off Hours(30A)

  • ☀【Dual USB】: This 30a solar charger controller compatibility with 12V 24V system. Fully 4-Stage PWM charge (Boost, ABS, Equalization, Float), the power MOSFET is used as and electronic switch without any mechanical switches and equipped with industrial-grade STM 8 microprocessor to prolong your battery life cycle..
  • ☀【LCD Display 】: Backlight LCD display PV/Battery/Load charge and discharge parameter. Adjustable Floating voltage/LVD/LVR/Load Timer for this charge controller according to needs.ADD Feature: Charge and Discharge Current, cumulative power generation and discharge power query.
  • ☀【Lead-acid Batteries】: Solar Charge controller is only suitable for lead-acid batteries: OPEN, AGM, GEL, not for nickel hydride, lithium, Liions, or other batteries. For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically.
  • ☀【PWM Charge Controller Protection】:Dual MOSFET Reverse current /overheat /Under-voltage discharge discharge /short-circuit /open-circuit / over-load /over-charging protection.more safe for home, industrial, commercial etc.
  • ☀【Easy to Install and Operate】: The charge controller should connect the battery first, then the solar panel, an....
Check Stock

EEEKit 20A Solar Charge Controller, 12V/24V Solar Panel Battery Intelligent Regulator with Dual USB Port PWM Auto Parameter Timer Setting Adjustable LCD Display, Blue

  • 20A SOLAR CHARGE CONTROLLER: 20A Solar panel battery intelligent regulator are UL 1741 certified, the solar charger controller compatibility with 12V 24V system. Discharge current: 10A, build-in industrial microcontroller, automatically manage the working of solar panel and battery in solar system. Dual USB output 5V/2.5A (max), to support mobile phone charging..
  • SIX PROTECTION FUNCTIONS: 20A solar controller has Short-circuit protection, Overload protection, Over Current Protection, Overcharge protection, Under-voltage protection, Over-voltage protection. Fully 3-stage PWM charge management, improve system efficiency and prolong the life span of the battery..
  • BATTERY TYPE: The charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL, it is not suited for nickel hydride, lithium, Liions, or other batteries. In order to protect the lifespan of the battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically..
  • FUNCTIONAL LCD DISPLAY: Intuitive LCD display that can clearly indicate the status and data is able to switch modes and parameter configuration, suitable for home, industrial, commercial, etc..
  • EASY TO USE: The charge controller should connect the battery first, then the solar panel, finall....
Check Stock

PS4 Controller Paddles,Wireless PS4 Back Button Attachment, Controller Adapter with MODS & Paddles for PS4

  • Function Setting：❶.Long press the SET button for 2 seconds,X light flashes quickly.❷.Press the M1 or M2 (Press once to switch once ), lights flashing slowly in sequence（Flashing Sequence:×→〇→Δ→□→R3→L3→R2→L2→R1→L1).❸.When the target button is flashing, press the SET button,finish setting..
  • Turbo function:Press the M1or M2 and Turbo at the same time, the function key has Turbo continuous launch function .Repeat this step to cancel..
  • Clear Cache and Memory Programming Function:Long press the SET button for 5 seconds,the LED changes from blinking to off and the M1/M2 function is cleared.Insert the handle again and still retain the last programming function.The factory default has no definition..
  • Wireless Design: No other tools are needed, just plug in the controller , and do some simple settings ..
  • NOTE: The handle should also have programming and memory programming functions whenit is not connected to Bluetooth state and charging state..
Check Stock