Reviews Semiconductor Component

SSR-100DD Solid State Relay DC to DC (Input 3-32V DC Output 5-60V DC) with Heat Sink, 100A

  • Model: SSR-100DD, single phase Solid State Relay 100A DC to DC control, CE Compliant to EN60950-1.
  • Input voltage 3-32V DC, Load voltage 5-60V DC, Max load current 100 Amp.
  • Rugged epoxy encapsulation construction, high isolation over than 50MΩ(500VDC), high dielectric over than 2.5KV, output snubber circuit protection.
  • No EMI/EFI & Low surge by Zero Cross Trigger method, specially suited to control sensitive, capacitive and Non-saturated inductive loads.
  • SSR switches use semiconductor component acts as a switch for the relay, no moving parts inside, no mechanical wear, no action noise, no mechanical failure, and high reliability.
Check Stock

SSR-25DD Solid State Relay DC to DC (Input 3-32V DC Output 5-60V DC) with Heat Sink, 25A

  • Model: SSR-25DD, single phase Solid State Relay 25A DC to DC control, UL Approved, CE Compliant to EN60950-1.
  • Input voltage 3-32V DC, Load voltage 5-60V DC, Max load current 25 Amp.
  • Rugged epoxy encapsulation construction, high isolation over than 50MΩ(500VDC), high dielectric over than 2.5KV, output snubber circuit protection.
  • No EMI/EFI & Low surge by Zero Cross Trigger method, specially suited to control sensitive, capacitive and Non-saturated inductive loads.
  • SSR switches use semiconductor component acts as a switch for the relay, no moving parts inside, no mechanical wear, no action noise, no mechanical failure, and high reliability.
Check Stock

Cooling Fan Kit，Ultimate 3510 Cooling Fan Kit with Heatsink for The Latest Raspberry Pi 3B

  • FOR LEARN AND RESEARCH: Suitable for semiconductor refrigeration study, research solutions, development of refrigeration equipment planning.
  • WIDE APPLICATIONS: Semiconductor refrigeration system can be used for slab cooling, pet bed cooling, small space cooling.
  • 72W HIGH POWER: Semiconductor cooler possess high cooling power up to 72W, which is a perfect cooling device for fish , useful and practical.
  • NO REFRIGERANT REQUIRED: Semiconductor refrigeration water chiller support stable operation, low noise, no need for refrigerant.
  • CORROSION RESISTANT ALUMINUM ALLOY: Adopt good quality aluminum alloy material, light weight, has good strength and good corrosion resistance.
Check Stock

99.99% Silicon Metal Si Metal Element High Purity 14 Semiconductor Monocrystalline Si Block 10 g / 50 g(50 g)

  • GOOD SEMICONDUCTOR MATERIAL---The electric conductivity of the silicon metal strengthens as temperature rises, so it is a good semiconductor material.
  • PERFECT Original MATERIAL---The silicon metal is perfect Original material for monocrystalline wafer production.
  • 99.99% HIGH PURITY---The silicon metal is of 99.99% high purity monocrystalline silicon block.
  • INDUSTRIAL APPLICATION---The silicon metal can be used to produce converter, transistor, diode, etc.
Check Stock

Peltier Cooler Semiconductor Refrigeration Cooling System DIY Kit 12V 6A Thermoelectric Peltier for Mini Air Conditioner

  • ADVANCED TECHNOLOGY-- Semiconductor coolers are a form of solid state cooling. The thermoelectric peltier adopts semiconductor technologies and electronic assembly techniques..
  • FEATURE-- Refrigeration effect depends on the size of the cooling space, ambient temperature, heat insulation, seal ability, etc..
  • WIDE APPLICATION-- This thermoelectric cooler can be widely used for small space cooling, air cooling dehumidification, semiconductor refrigeration learning theory and more..
  • EASY INSTALLATION-- The semiconductor refrigeration has compact size and simple construction for easy installation, convenient to use..
  • GOOD COOLING EFFECT-- It has low noise, and can cool down quickly, ideal for small area cooling..
Check Stock

ESUMIC DC 12V DIY Thermoelectric Peltier Refrigeration Cooling System Kit Semiconductor Cooler Conduction Module + Radiator + Fan + TEC1-12706

  • 1. Material: Adopt TEC1-12706 semiconductor chilling plate, good quality for use..
  • 2. Structure: Complete sealed structure, isolating the moisture in the air..
  • 3. Application: Include TEC1-12706 semiconductor cooler and other accessories, easy to install. Compact size can be installed anywhere, easy installation. Suitable for small space cooling,semiconductor refrigeration learning theory, research solutions developed cooling equipment planning..
  • 4. Performance: High cooling efficiency, easily cooling down within a few minutes. Mini air conditioner for pet or little fridge..
  • 5. Effect: Great DIY kit for electronic enthusiasts in semiconductor cooling applications..
Check Stock

Portable Cooling Module 12V 10A 120W,Semiconductor Refrigeration Pieces Kit Thermoelectric Peltier Air Cooling Device with 12706 Chip for Pet Bed Cooling Small Space Cooler

  • Voltage Specifications: This semiconductor cooler 12V.
  • Premium Making Material of This Semiconductor Refrigeration: Aluminum + plastic fan..
  • Dual-core Semiconductor: 200 x 120 x 100mm / 7.87 x 4.72 x 3.93 inch..
  • Multiple Using Features: No noise, no vibration, no refrigerant required. The Air Cooling Device is suitable for small space cooling,semiconductor refrigeration learning theory, research solutions developed cooling..
  • Widely Applicated Fields: The Cooling Module can used for plate cooling, pet bed cooling, test bench, small space cooling..
Check Stock

High Temp Tape,AIYUNNI(2 inch X 108 FT) Polyimide High Temperature Resistant Tape Silicone Adhesive - for 3D Print Bed,Soldering,Masking etc.

  • ✔High Temp Tape Dimension:50mm x 108 ft x 0.05mm (Width x Length x Thickness)It is easy to cut to any size and length you want..
  • ✔High Temperature Tape:Made of Polyimide film with silicone adhesive.for easy release and leaves no residue after peel away..
  • ✔High Temperature Resistance:They are compatible with a wide temperature range as low as -73°C (-99°F) and as high as 300°C (572°F).Polyimide polymer films provide great insulation and protect the nearby component from excessive heat from the hot air rework..
  • ✔Wide Applications:for Automotive sensor and manifolds,Insulating circuit boards,Etching,Fiber Optics Cable,High temperature powder coating,Semiconductor manufacturing,Wave soldering during circuit board assembly,3D Printing,LED strips,Electronic Repair,Solar industries,frequency conversion power,transformer etc..
  • ✔From insulating circuit boards to high-temperature powder coating, you can use AIYUNNI high temp tape in all your projects that involve harsh heat environment..
Check Stock

High Temp Tape,AIYUNNI (4 inch X 108 FT) Polyimide High Temperature Resistant Tape Silicone Adhesive - for 3D Print Bed,Soldering,Masking etc.

  • ✔High Temp Tape Dimension:100mm x 108 ft x 0.05mm (Width x Length x Thickness)It is easy to cut to any size and length you want..
  • ✔High Temperature Tape:Made of Polyimide film with silicone adhesive.for easy release and leaves no residue after peel away..
  • ✔High Temperature Resistance:They are compatible with a wide temperature range as low as -73°C (-99°F) and as high as 300°C (572°F).Polyimide polymer films provide great insulation and protect the nearby component from excessive heat from the hot air rework..
  • ✔Wide Applications:for Automotive sensor and manifolds,Insulating circuit boards,Etching,Fiber Optics Cable,High temperature powder coating,Semiconductor manufacturing,Wave soldering during circuit board assembly,3D Printing,LED strips,Electronic Repair,Solar industries,frequency conversion power,transformer etc..
  • ✔From insulating circuit boards to high-temperature powder coating, you can use AIYUNNI high temp tape in all your projects that involve harsh heat environment..
Check Stock

Ledmall Full Spectrum Motion Star Effects 7 Color with White Laser Christmas Lights Projector Outdoor

  • New 7 colors with WHITE LASER CHRISTMAS LIGHTS by mixing semiconductor red, green, and blue, with Years of Design and optimization, the first Semiconductor WHITE LASER Christmas and Decorative lights, with motion and star effects, and huge coverage..
  • White laser made through Semiconductor green, blue and red, LASER LIGHTS using LEDMALL advanced Optical Systems and precise power ratio control to form nature's 7 colors including pure white, Full Spectrum all natures 7 colors with dominant White Laser formed by pure semiconductor Red, Green and Blue laser in proper ratios through advanced optics, to form star shape pinpoints.
  • Please review the images and videos on detail page for effects of this lights before purchase,7 nature's colors including white, pink, teal, blue, green, red, yellow, with motion Starry, Twinkle, Fading, Chasing and static effects mode, optimized for Outdoor Holiday Décor,decorative lights, Decorative Outdoor Lighting Projectors, full spectrum colors, and with speed control, also with flash or static of your choice.
  • updated RF Remote control, with motion and timer, with indoor Base stage and outdoor stake extension, With Timer setting 2, 4, 6 and 8 hours durations, moving controls and speed control.
Check Stock