Reviews Semiautomatic Tube Cutting Machine

SenTECH 40W CO2 Glass Laser Tube 700mm Length Dia 50mm for Laser Engraving and Cutting Machine (Buy More Discounts)

  • 1. [Parameters]: 40 Watt 700mm length Ø50mm.
  • 2. Each tube HAS BEEN TESTED before leaving from our factory, we try our best to give a good shopping experience and make you not waste time and lose money..
  • 3. [Installation]: You need to make sure the positive and negative pole. We HAVE CONNECTED the LEADS, so that you can quickly install the tube..
  • 4. [Upgraded version]: Upgraded laser tube has a more stable power, which is favorable to increase the cutting speed. The tube has LONG-TIME LIFE because of the especial technology..
  • 5. [Application]: It is mainly used for LASER ENGRAVING CUTTING MACHINE and other engraving equipments. If it is broken in the transportation, contact us please, we are trying our best to solve your problem..
Check Stock

Coffee Machine Cleaning Brush, Dual-Use Nylon Espresso Coffee Machine Clean Brush Coffee Machine Group Head for Home Kitchen Use

  • PREVENT BURNING: The design of the spoon elbow can prevent it from becoming soiled or burned with boiling water during operation. Perfect head to clean small spaces and reach any corner of the machine.
  • HIGH QUALITY MATERIAL: Coffee brush made of nylon material, with heat resistance, wear resistance, chemical resistance and self-lubricating. The head of the brush can not be separated.
  • FUNCTIONAL SUPPORT: Perfect for cleaning coffee residues in the semiautomatic waste of the coffee machine, including various filter styles of the coffee machine and the coffee grounds on the board. A dual-purpose brush can not only clean coffee grounds, but also spoon powder.
  • BEST ACCESSORY: Our cleaning brush coffee machine has a thin and long handle, easy to operate and comfortable, smooth and not rough. Cut your cleaning time in half on your machine with it. Eliminates the hot water running in yourhand.
  • APPLICATION: It is an essential accessory, the perfect choice for hotels, cafes and restaurants, regular cleaning will help extend the life of your coffee equipment.
Check Stock

INTSUPERMAI Pipe Cutter Round Pipe Cutting Machine Pipeline Hydraulic Ppipe Cutting Machine Electric Hydraulic Fire Pipe Galvanized Pipe Cutting Machine 220V

  • Pipeline hydraulic pipe cutting machine is used for ordinary steel pipe galvanized pipe, plastic-lined pipe, spiral pipe and seamless steel pipe cutting. Widely used in pipeline construction related to fire protection, construction, water supply mines, coal mines, etc..
  • Diameter of steel pipe that can be cut:40-280mm, The wall thickness of the steel pipe that can be cut:3-6mm, Jack load:5T, Power:750W, Voltage:220V.
  • Automatic return design: Rotate 90° clockwise to tighten the hydraulic oil valve, then press the handle down, turn 90° counterclockwise to loosen the hydraulic oil valve, and the cutting blade returns to its original position.
  • Triangle bracket: stable bracket with roller design, adjustable roller distance, suitable for different pipe diameters, adjustable bracket height, easy to lay the tube flat and cut the tube without deviation.
  • Comes with five roller, which is suitable for cutting pipes of different sizes..
Check Stock

HORUSDY 2-1/2\ Ratchet PVC Pipe Cutter for PEX,PVC,PPR and Plastic Hoses, SK5 Steel Blades Ratcheting Pipe Cutter Tool for Home Repairs and Plumbers

  • [High-Quality] This Pipe Cutter is made of high-quality aluminum alloy and manganese steel.Its tough and durable..
  • [Safe and Convenient] The pipe cutting machine adopts the ratchet drive technology to make the cutting smoothly and auto-locking function protects users away from injury..
  • [Cutting Capacity] Cutting capacity is up to 2-1/2 inch. suitable for most plastic (PVC,CPVC,PPR,PEX,PE,Rubber hose)and different layers tube..
  • Rubber-textured handle, comfortable to use, reliable to hold, and not easy to hurt. Buckle the safe lock,the tube cutter will save space to keep and store..
  • [Deburring Tool] The deburring tool is made of solid plastic structure and high-speed steel. It can be quickly, cleanly and conveniently applied to the inner diameters of different pipes..
Check Stock

PVC Cutter 2-1/2\

  • 【WIDELY USED】: Can be used for PP-R pipes, PVC pipes, PE pipes, etc. Cuts Up to 2-1/2" Pipe Capacity.（When cutting PVC flexible pipe you should revolve the pipe whilst compressing）Ideal for Home Working and Plumbers.
  • 【EFFICIENT WORKING】: The cutting machine adopts ratchet drive technology to ensure automatic locking during the cutting process to protect the user from the rebound of the blade. The handle adopts the principle of leverage and is light in design, which greatly saves your strength.In the bottom of the tube cutter, there has a stainless buckle.When you don’t use it, you can buckle the safe lock. The tube cutter will become small to save space.
  • 【QUICK CHANGE BLADE SYSTEM】: Has a quick blade replacement system.You can easily and quickly replace the blade without any other tools,Also we provide one EXTRA replacement blade in Set. So you can have TWO blades with our PVC cutter.You can easily change blades in less than 10 seconds..
  • 【ERGONOMICS DESIGN】: The handle of the pipe cutter covered by soft rubber and is ergonomically designed which is non-slip,soft and comfortable,reducing fatigue on your hands and wrists. It can be operated for a long time and improve work efficiency..
  • 【SUPER QUALITY】: Pvc pipe cutters blade uses ....
Check Stock

Holizzler PVC Plastic Pipe Scissor Cutter (Style A)

  • 1. The pipe cutter made of high-quality steel, rust-resistant and corrosion-resistant and use long service life..
  • 2. The blade sharp, the cutting is convenient, time-saving and labor-saving, and the maintenance efficiency is improved..
  • 3. The design is small and light, beautiful in appearance, easy to carry. Feel comfortable, non-slip feel good..
  • 4. The pipe cutting machine is suitable for cutting PVC pipes, gas pipes, electrical and equipment pipes with a diameter of less than 25mm/1.0 inches..
  • 5. If the spring bow of the tube shear falls off, don't worry, you can easily install it yourself..
Check Stock

10W Output Laser Engraving Machine, JICCODA L1 High Accuracy 0.05 * 0.1mm Compressed Spot Laser Cutter Mini CNC Machine with 5.0 Bluetooth Technology Laser Engraver for Wood and Metal

  • [Upgraded 10W Laser mould] 10W JICCODA L1 laser engraver adopts the latest double-layer 5.5W laser technology , which can reach the speed of laser cutting up to 10,000mm/m and cut 10mm thickboard and 5mm acrylic plates at a single pass. The service of the laser module up to 10,000 hours in regular temperature..
  • [Built-in dual motors] Comparing the most laser machine has only one motors ,JICCODA L1 cutter machine master 2 motors inside laser frame in order to keep the laser engraver machine more stable while it engraving..
  • [Ultra-accuracy engraving compressed spot & fast laser cutting] 0.05*0.1mm ultra-accurate compression spot can achieve your varieties laser cutting and laser engraving for wood and metal, DIY creation activities and bring you a distinct grain pattern,vivid picture and clear-cut engraving and cutting experience. FR4 double-sided main board with glass fibre material strength the precise of our mini cnc machine..
  • [Easy assemble]The construction of high-strength aluminum alloy and ABS material makes the JIOOCDA L1 laser machine robust and stable. The laser cutting engraver has a disassembled modular design with the stable performance of the drive plate and the laser tube core with heat dissipation function. The laser engraver and cutting m....
Check Stock

YWBL-WH Zinc Alloy Tube Cutter,Glass Tube Cutter Pipe Cutter Hand Tools for Cutting Small Glass Tube

  • Application:Glass cutter device, adapted to cut small glass tube, easy to operate.Handheld and portable, cutting glass tube is very easy and effortless..
  • Size: 6.5×7.2cm/2.6×2.8inch (as pictures shown).
  • Max cutting thickness of glass tube: 3mm/0.12inch.
  • Max cutting diameter of glass tube: 40mm/1.57inch..
  • Easy to Use and Fast:Just score and snap. Simply insert tubing into the cutter and rotate tube to score a precise mark, then snap tube along score mark..
  • Glass tube diameter can be cut to 1.57" (40mm)..
  • Material: Glass tube cutter is made of high quality zinc alloy, durable to use..
Check Stock

BLUEROCK Tools PTM50-C Electric Motorized Pipe Threader Threading Machine fits RIDGID Dies

  • Threading machine pipe capacity: 1/2"-2"(DN15-DN50).
  • 3 FUNCTIONS -- This electric threading machine has a 3 in 1 function—threading, cutting, and trimming. The clamping die is stable and reliable, the feed depth of the die can be adjusted for more accurate control.
  • The cutting knife and trimming knife adopt alloy steel blade, which is fast, stable and efficient..
  • POWERFUL MOTOR -- This 220V Pipe Threader applies 1HP/750W motor, it has compact structure and strong power. The speed is 23RPM, more efficient and labor-saving..
  • AUTOMATIC TOOL RETRACTION -- This Power Pipe Cutting Threader adopts the inclined block automatic tool retraction design, without manual control, and can greatly improve the accuracy when machining the thread length..
  • SELF OILING -- This Tube Cutter has an oil filling system with an oil reservoir, which fills oil through the head and has a constant flow..
Check Stock

2 Pcs Mini Steel Tube Cutter Tool, Mini Tubing Cutter Pipe Cutter Tube Cutter Tool of Diameter from 1/8 to 1-1/8 Inch (3-28 Mm), Tube Pipe Cutter for Copper Brass Aluminum, Thin Stainless Steel Tube

  • Mini Tubing and Pipe Cutter: our tubing cutter is especially designed to assist plumbers, electricians and mechanics.
  • It is made of heavy duty alloy steel, this tube cutter mainly use for cutting copper, brass, aluminum and thin steel pipes.
  • Tube pipe cutter makes clean and precise cuts.
  • Various Tube Cuts: this tubing cutters will efficiently cut copper, brass, aluminum, thin steel and PVC pipes with 1/8 to 1-1/8 inch (3-28 mm) outer diameter.
  • This mini tube cutter provides a fast way to do a clean cut.
  • Convenient and Powerful: our small pipe cutter fits nicely in restricted spaces.
  • The mini steel tube cutter tool features a strong yet lightweight slide and wheel housing and large knurled screw knob for easy control of cutting pressure.
  • Large knurled feed screw knob provides users with ultimate cutting pressure control to produce clean cuts.
  • Multifunctional Pipe Cutter: this tube cutter tool fits for use on construction sites, plumbing jobs, HVAC and refrigeration, heating, manufacturing, decorating or even at garage repair shops and so on.
  • Specifically designed for use in restricted spaces to make tight cutting jobs significantly easier and more manageable.
  • Easy to Operate: cutting thin stainless steel tubing has never been easier.
Check Stock