Reviews Self retaining Wing Screws

HQST Adjustable Solar Panel Tilt Mount Brackets, 28 inch Solar Panel Racks with Foldable Tilt Legs - Support up to 150 Watt Solar Panels for Boats, RV, Roof Off Grid System

  • 【WIDE APPLICATION】: Adjustable solar panel mounting brackets designed for off-gird solar systems, compatible with HQST Solar Panels under 150W. Great addition for use on boats, RV, roof, marine etc..
  • 【HIGH EFFICIENCY】: Ideal for positioning solar panels at an angle on a rooftop.Gain up to 25% more solar panel efficiency by tilting your panels towards the sun instead of laying them flat.Maximum tilt angles depend on the size of solar panels..
  • 【EASY TO INSTALL & ADJUST】: Quick assembly with stainless steel fasteners and precise hole placement. The package includes the bracket between tilt to panel..
  • 【LIGHT WEIGHT BUT STRONG】: Our solar tilt mounts are made of aluminum alloy, which is light weight and ideal for easy transportation and safe mounting..
  • 【 PACKAGE INCLUDES】: Solar panel mounting kit comes with 4 * fixed brackets.
Check Stock

3/8 x 1 1/2 Thumb Screws with Wing Knob Thumbscrews Thumb Screw Butterfly Thumb Screws Thumbscrew 6

  • Package Content: 6 x Thumb Screws with Wing Knob.
  • 3/8"-16 Standard Thread Knurled Thumbscrew Grip Knobs Thumb Screw Tee Wing - 3/8" x 1 1/2" Thumb Screws with Wing Knob.
  • Thread Material – Stainless Steel - anti-rust and anti-corrosion, strong and durable.
  • The head is made of nylon and is 1 3/4" in length.
  • Easy to install and remove, can be used repeatedly.
Check Stock

Floyutin 10 PCS Stainless M8 Wing Nuts Metric Thread Butterfly Clips Fasteners Kit

  • Measurement (Appr.): M8x1.25 304 Stainless Metric standard wingnuts. M8 stands for Metric thread inner diameter(8mm/0.31"), thread pitch 1.25mm.Thread Max outer diameter 0.61"/15.6mm,thick 0.35"/9mm.the wing thick 0.2"/5mm, wing length 0.75"/19mm : Fit on to M8x1.25 screws/bolts. Fully threaded, Right hand direction. More detail size please refer to the photoes..
  • Thumb nuts with 2 butterfly wing on each side. Hand twist without tools, Fit for finger tightening or lossening. Allows you to adjust the tightness of the legs easily. Wings are thick(0.34") and don't see an issue with any bend distortion..
  • Easy to install: Serve as a nut, Use metric screws or apprapriate sized bolts to mount ss wing nuts. Just spin on on easily, tighten nicely, and stay in place. Please choice the right metric thread size match bolts or screws and driver..
  • Multi-purpose Application: SS heavy duty threaded can be mounted with bolts. Used it for quick disconnect on bolted connection.Just for hanging bird houses,furniture decoration,hardware lighting, marine battery posts. Better replace the old nuts for getting adjusted or temporarily removed pretty often..
  • 10 pcs wingnuts included. No Bolts/Dirver included. Made of 304 stainless steel, good solid .corrosion resistant,sturdy and ....
Check Stock

AIR LOCKER CN25AL 14 Gauge Concrete T-Nails for Concrete Nailers 2-1/2 Inch Smooth Shank (2 Packs of 1000)

  • Replacement Frame Nail Gun Donut Flush Nailer Part.
  • Compatible With: Hitachi FN83A NR83A NR83A2 NR83A2 NR83A2(S) FR350A.
  • Includes a wrench, two wing nuts and donut flush nailer.
  • It can be connected to the nail head by fixing screws or thumb wing nuts. Fixing screws or wing nuts for easy installation.
Check Stock

JINHONGRUI License Plate Screw Bolt- Stainless Steel Car Tag Fastener with Skull Cap Covers, Rustproof Decorative Ghost Head Logo Front Rear Frame Mounting Hardware

  • ...ory for motorcycles, cars, trucks, trailers..
  • RUSTPROOF STAINLESS CAR TAG BOLTS- Using 304 stainless steel, this is one of the materials with highest rust and corrosion resistance. The silver chrome screws are uncoated, keep the license plate cool, clean and tidy. Including self-tapping screws, machine bolts, insert retainer and nut, complete license plate fasteners can easy fasten the tag plate frame cover..
  • ANTI-THEFT, RATTLE PROOF- 4 pcs Hexagon socket head anti-theft metric bolts with the special screwdriver, security screws can keep the thief away from your car. The black foam license plate pad is pasted on the back of the metal license plate, can reduce the vibration noise of the plate, and avoid the car license from scratching the car paint..
  • AFTER-SALES SERVICE- If the stainless steel license plate screws we provide are not suitable for your model, please contact us at any time, we can give you a refund or free Send replacement. Please rest assured to buy!.
Check Stock

X AUTOHAUX 8pcs G1/4-20 Chrome Valve Cover Bolt for Chevy 283 302 305 307 327 350 383 400 Engines

  • Valve cover wing bolts fabricated of strong lightweight aluminum..
  • Valve cover wing bolts chrome anodized finish..
  • Meet OEM size with standard Y top 1/4 in. 20 X 5/8 in. L..
  • Extra long threads provide additional thickness.Washers and hold down tabs are not included with the wing bolts..
  • These wing bolts are highly durable and make valve cover removal fast and easy.Valve cover wing bolts includes 4 per set with set screws..
Check Stock

#8 Self Drilling Drywall Plastic Anchors Screws for Drywall - Equipped with 25 1.5 Inch Wall Anchors and 25 Stainless Steelscrews, Hanging 75 Pounds No Pre Drill Hole Preparation Required

  • ...REINFORCED NYLON:Although most gypsum board anchors are made of ordinary plastic, our anchors use tough glass fiber reinforced nylon. Using our drywall screw kits, the cracked style is designed so that you will not feel frustrated by breaking or peeling off when installing the fasteners..
  • EASY TO USE: Our wall screw retainers are very easy to use. They are self-tapping screws and do not require pre-drilled or pilot holes. Since you only need a drill bit, you can install as many products as you like on plasterboard and drywall. They are great for hanging bathroom and kitchen accessories, shelves, lights, mirrors, picture frames, curtain rods and small decorative shelves, note that they are not suitable for use in concrete and brick wall.
  • FIRM: Frequent use of drywall anchors, you are always worried that they may be pulled out or fail because they are not strong. With durable reinforced nylon structure and 50 pounds of fixing strength, our anchor points are very strong..
  • NEW DESIGN: Deep Thread Design: Self-diamond drywall anchors with a deep thread design can be used securely on drywall.
Check Stock

FLY HAWK Flagpole Bracket,1 inch Mount to fix The Pole in The House Garden Wall, Made of Heavy-Duty Thickened Aviation Aluminum, with Additional Long self-Tapping Screws (Black)

  • ★ Two positions--180 degree straight or 45 degree angle-suitable for most flagpoles with 1 inch inner diameter, flagpole flag, internally equipped with extended self-tapping screws, making the bracket more firm and able to withstand 7 gale winds.
  • ★ High quality--the flagpole bracket is made of high-quality aviation aluminum material, which has higher durability-it can be smoothly installed on multiple surfaces, and the flagpole is optimally fixed on the terrace, porch, front yard and other places.
  • ★ Durable all-weather structure -- smooth paint coating- lasting color or rust.
  • ★ Accessories upgrade-multi-functional adjustable wing nuts for fixing rods, including hardware mounting screws, expansion screws.
  • ★ After-sales support-30 days no reason to return or exchange-we only do quality assurance-if you have any questions, please contact us-we will provide you with 24-hour service.
Check Stock

Universal License Plate Screws for Fastening License Plates, Nylon Screw Inserts, Frames and Covers on Cars and Trucks (Black)

  • LICENSE PLATE SCREWS: 8 license plate screws and 8 nylon screw inserts make fastening your license plates easy with this complete original equipment style fastener kit. Fits vehicles that use..
  • EASY INSTALLATION: We designed this set of premium screws to be durable and easy to install. Simple screwdriver installation makes them easy to use for enthusiasts and casual users alike. No special tools required..
  • CORROSION RESISTANT HARDWARE: Say goodbye to your old rusty license plate screws with this durable, rust resistant license plate hardware guaranteed to last the lifetime of your vehicle..
  • MAXIMUM COMPATIBILITY: Our license plate fasteners are the standard size of 1/4" diameter x 3/4” long self tapping screws that will fit most vehicles that use nylon/plastic screw retainers. Metal threaded holes require a different style screw so we recommend you check your vehicle application for compatibility..
  • AFTER-SALE SERVICE: If there is a problem during use, please contact us immediately.Our after-sales 24 hours to solve your problem. Please believe that our service will make you satisfied..
Check Stock

Glass Door Retainer Clips Kit

  • Material:The glass retainer clips are clear plastic construction and the screws are made of alloy.
  • Easy to install: Our glass cabinet panel screen retainer clips with screws complete assembly for easy installation,drill several holes on walls, cabinets or doors at proper positions, fix glass and clips, then tighten the screws.
  • Quantity: You will get 20 packs of glass retainer clips kit,including 20 pieces of glass clips and 20 pieces of screws,and 2 pieces of bumpers(as gift).
  • Size:The plastic mirror clips are about 25 mm/ 1 inch in length, available in 4mm offset.
  • Wide application:Designed for recessed support of mirrors, glass... these plastic retainer clip kits can help you attach glass, mirrors or other screens on dresser, wardrobe, bookcase, pantry cabinets, doors, wooden panel and other places easily, bringing you much convenience.
Check Stock