Reviews Self Priming Pumps Suppliers

mistcooling 250 PSI Misting Pump

250 psi pump quiet operation 35Db solenoid valve – Controls flow of water in the pump in built filter – helps protect your misting nozzles built in water by pass self-priming.
Nickel-plated brass button series With stainless-steel Orifice Standard 10/24-inch thread 0. 012-inch Orifice Rust-resistant fixed impeller pin 0. 014 GPM Flow per Nozzle.
Maximum inlet pressure: 100 psi Minimum inlet pressure: self- priming. Maximum outlet pressure: 250 psi (depends on line length and numbers of nozzles) maximum flow: 0. 9 GPM full load Amps. 110V AC: 0. 7 amps 12V DC: 4. 0 amps Voltage: 110V-220V AC/ 12V DC (refer manufacturing label on the pump) noise level: 40 dB. Maximum fluid temperature: for room temperature/ cold water applications only.
Max pressure 250 psi Available in 110 V, 220 V & 12 VDC Durable Rust Proof Enclosure Thermal Safety Switch Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps Standard pump inlet: 3/8-inch push lock Fitting. Standard Pump outlet: ¼ inch Push-lock fitting. Max pressure 250 psi 110 V AC.
1. Solenoid Valve Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter th....

2 HP Motor / 230 Volt with built-in overload with automatic reset.
Pipe connections: 1 1/2" NPT suction 1 1/2" NPT discharge.
Great Pump for lawn sprinkling, irrigation, AC systems, Heat pumps, Water transfer or Dewatering.
Up to 86 GPM at 5ft suction lift @ 20psi.
Self-Priming Design (After initial Priming).

[Compatibility]: Water Pump Controller is suitable for self-priming pumps, jet pumps, garden pumps, clarified water pumps, centrifugal pumps, etc. The electric switch is used in the water system to automatically start and stop the pump. The switch automatically detects water and stops the pump when there is water shortage to protect the pump from dry burning. Run..
[Properties]: Water Pump Switch input voltage: 110V, maximum power: 1.1KW-1.5KW, maximum current: 10A, Max Working Pressure: 10Bar.
[Professional manufacturing]: Manufacture in strict accordance with the original factory standards, stable performance, excellent workmanship, strict factory quality control and testing, professional manufacturing, high performance and high reliability..
[High performance]: Water Pump Controller is made of high-quality materials, IP65 waterproof, has good wear resistance, high temperature resistance, corrosion resistance, aging resistance, can ensure maximum strength and durability, and long service life..
[Easy to use]: Easy to install, easy to use, plug and play, can directly replace the old or damaged, to provide you with the greatest convenience..

The 12210 Series Pumps are the most compact, self-priming flexible impeller 115 volt AC utility pumps Jabsco offers.
3.4 GPM (12.8 LPM) output at 10' (3m) total head.
Replaceable brushes, intermittent duty cycle.

【operating system 】:AdBlue pumps for IBC delivery systems are not only designed for versatility. Ensure that the liquid pumped by the pump is pure and free of impurities, particles and hard substances.
【Performance experience】：The pump can be self-priming, with strong self-priming, adjustable pressure range, and adapt to various environments. Bring pleasure to use.
【Scope of application】:Mainly used for household tap water pressurization, car washing, faucets, showers, agricultural irrigation, non-flammable liquid transportation, garden watering and spraying, etc..
【safety warning 】:When the pump is not working, the green button must be turned off. The pump is not equipped with a pressure switch, but the power plug is pre-installed. During the installation process, the leakage of the adapter should be avoided for better use. We have 4 plastic adapters available.
【Quality Service】:Enjoy 6 months warranty. We are responsible for the product to the end. Tip: Each of our pumps has been tested and inspected before leaving the factory. It is normal to have residual water. Please ask for specific questions..

Working voltage: DC 6-12V, Power: less than 6W, Maximum flow: 1.5-1.8L/Min.
Power cord not included. Pump head: 5 meters, pump suction: 1.5 meters (test with water).
The design of the silicone case has a fixed effect, and mainly plays the role of shockproof and silent..
Micro self-priming pumps are widely used in home appliances, medical care, models, aquarium equipment, etc., mainly to achieve functions such as pumping water and cold water circulation..
The pump provides a smooth flow over all operating ranges. It also has a self-priming function that allows it to work quietly in the application. The pump can run idling for 30 minutes. When we are doing destructive work, the continuous pumping time can reach more than 1000 hours..

[Enhanced performance] 115VAC 3.3GPM 45PSI self-priming water pump with a self-priming suction of 9.8 feet and a lift up to 98 feet..
[Adjustable pressure] Built-in adjustable pressure switch. Adjustable pressure from 17-60psi range. The factory setting is 45 psi..
[Automatically] Automatically opens when turn on the water tap, stops when turn off the water tap. Easy to install, low noise operation..
[Widely used] The nemesis of low water pressure. It is widely used in faucets, showers, agricultural irrigation, non-flammable liquid transportation..
[Quality service] Enjoy a 4-year warranty. We are responsible for the product. TIP: Each of our pumps is tested and inspected before leaving the factory, It is normal to have residual water..

SPECIFICATIONS - This Air Operated (Pneumatic) Double Action Oil Transfer Pump has a High Flow rate of a Max 6.6GPM / 25LPM.
EFFICIENT DESIGN and CAPABILITIES - Our Transfer Pumps are Double Action and Self Priming designed, delivering fast and precise flow rates.
PROPER USE and SAFETY - All our pumps come with a 2" inch Adjustable Bung adapter, for easy installation for barrel mounted applications.

Fits Hayward Power-Flo LX above-ground and Power-Flo II self-priming pool pumps.
Assembly includes housing, basket and lid with O-ring.
It has 1-1/2-inch FIP Inlet by 1-1/2-inch MIP outlet.

Self-priming gear electric pumps suitable for lubricants and viscous liquids.
Rugged bronze body and stainless steel shaft.
Can be used to transfer salt water, fresh water, diesel, lubricants, & machinery fuel (except gasoline petroleum fuel).