Reviews Security Scanner Ribbon Connector

AEDIKO 2pcs Police Scanner Antenna Radio Scanner Antenna HF VHF UHF 20-1300MHz BNC Male Magnetic Base Antenna for Radio Shack Police Radio Scanner

Feature:Cable Connector: BNC Male Connector.
Magnetic Base Diameter:2.8cm / 1.1in (This Size Base Antenna is not Recommened to put on the roof of truck,car).
Easy to Install:Radio Scanner Antenna Come With Magnetic Base Can Installs On Any Metal Surface And With BNC Male Connector, You Do NOT Need To Install Any Drivers. Just Screw It To The Connectors of Your Device and Antenna Runs.
Wide Application:The Radio Scanner Magnetic Base Antenna Can Use for Car Mobile Radio.

Easy to Install:Radio Scanner Antenna Come With Magnetic Base Can Installs On Any Metal Surface And With BNC Male Connector, You Do NOT Need To Install Any Drivers. Just Screw It To The Connectors of Your Device and Antenna Runs.
Wide Application:The Radio Scanner Magnetic Base Antenna Can Use for Car Mobile Radio.

【Specifically for】OBD1 to OBD2 adapter Cable has high practicality, which is used specifically for connecting your scanner and your vehicle,....
【Easy to Use】GM OBD1 Scanner Adapter Cable is easy to use, its GM 12 pins allows you to connect a GM vehicle with a OBD1 12 pins socket with your....
【Metal+Plastic Material】OBD1 Adapter Cable is made of high quality metal and plastic materials, which is durable is ecofriendly. And it adopts....
【Connector】GM 12 pins male connector.
OBDII 16pins female connector.Built to meet standard specification, strictly follow factory quality control..

UHF:400-470MHZ Gain: 2.5/3 dB, Max power: 50W, Impedance: 50 Ohm, Connector type: UHF, Connector:BNC male.
Suitable for car mobile Radio station，for BCD996P2 BC75XLT BC125AT Scanner antenna.
Rubberized Magnet Cover no body scratching,Won’t rip off in high speeds or winds.
Package Contents:1* VHF/UHF Dual Band Stealth Antenna.1* Magnetic Mount with 5M/16.4ft Cable.
Never worry about any security problems. We are confident in the quality of our antenna and willing to provide 1 MONTHS Replacement Warranty and 100% Satisfaction Guarantee. If you unfortunately get a defective one, please contact our customer support..

✨Wide Application: Brand New OBD1 12 Pins to OBD2 16 Pins Adapter Scanner Cable, data link cable, used specifically for connecting your scanner and....
✨Premium Quality: This GM 12-pin to OBDII 16-pin cable is made of high quality metal and plastic materials, which is durable is eco-friendly. And it....
✨Product Specification: Type - cables, adapters & sockets.
Connector - GM 12 pins male, connector, OBDII 16pins female connector.
✨Easy Operation: This GM 12-pin to OBDII 16-pin cable is easy to use, its GM 12 pins allows you to connect a GM vehicle with a OBD1 12 pins socket....
✨Note: The item is just an adapter, NOT a scanner. Package included:1 x GM 12-Pin to OBDII 16-Pin Cable..

Notice: Standard Tamiya plug, this plug 2 hole, one is half cicle, another is square. This battery is 8 Cell AA Battery Packs and Standard Tamiya plug. Package include: 1 Pack 9.6V 2000mAh Ni-Mh High Capacity battery and 1 pack USB charge cable,fit for Robots and some EVO Scan Scanner.
Standard Tamiya plug cross-section dimensions 0.52*0.28 in/1.34*1.0cm(LxW). 9.6V Ni-Mh Battery Suitable for various applications, the 9.6V RC battery pack will work with most hobby units such as RC monster trucks, olar express trains,ricochet RC trucks, RC beetles, RC Hummers, Traxx Tyco cars, radio shack RC cars, 1/20 Tanks.
The replacement NiMH 9.6V 2000mAh battery pack dimensions:L* W *H 4.09"* 2.32"*0.63" . built-in standard Tamiya connector..
9.6V 2000mAh NiMh Tamiya RC Battery Pack replacement for 1/20 RC Tank and Uniway Scale 30KM/H RC Cars, work time is 3-4 times than other 9.6V 700mAH Battery, charge time is 6-10 hours..
Make sure your device battery dimension is same as this one and your battery plug is same as Tamiya standard plug, one hole is half circle,another hole is square,Just as product picture show.NiMH Battery Pack 9.6V 2000mAh High Capacity Rechargeable RC Battery with Standard Tamiya Connector for RC Car, Robots, Security.

...designed for increasing effective receiving distance, reducing noise, and enhancing receiving sensitivity..
INSTALLATION METHOD: 30MHz -1200MHz wideband scanner mobile radio antenna glass installation, it is recommended that you stick to the use of Velcro, I hope you can use it more convenient and simple..
WITH A BNC CONNECTOR：VHF UHF ham mobile radio antenna Comes with a BNC connector.The adhesive tape is strong and not easy to fall off. Mount Style: Glass mount (stick with adhesive tape).You can safely place vehicle ham radio mobile radio antenna where you need it..
STRONG SIGNAL RECEPTION ABILITY：Ham radio antenna glass mount w/BNC male connector adopts strong signal reception ability.Receive Frequency: 30MHz ~1200 MHz. Receive Gain: 3dB.Cable Length: Approx 3 meters / 9.8 ft. Band: Wideband receive. Adhesive tape size: 12 * 2.2 * 0.5cm / 4.7 * 0.9 * 0.2in..
EASY TO CARRY：30MHZ -1200MHZ wideband scanner mobile is easy to install and use. Car truck amateur radio two way radio low profile antenna is compact and lightweight, easy to transport and fits perfectly in the bags or suitcases or your carrying bag..

BNC Male Antenna: Frequency Range: 20MHz – 1300MHz.
Adhesive Mounting: Police Radio Scanner Antenna Come with Car Window Glass Adhesive Mounting.
with BNC Male Connector widely used for Public Radio Scanner, Ham Radio, Two Way Radio, Walkie Talkie, Mobile Radio.
Application: Compatible With Indoor Radio Tuner AV Audio Vedio Home Theater Receiver Stereo Receiver with Bluetooth Power System Speaker Selector Music System.
Package Contents: 2pcs VHF UHF Car Antenna.

The OBD main cable is compatible with Autel MaxiIM IM508 Scanner..
If the main cable for your Autel MaxiIM IM508 is bad or damaged, you can buy this for exchange..
Please NOTE: The cable only supports for Autel MaxiIM IM508. Before you purchase, please make sure your scanner is in the support list..
Stretch-resistant Cable: High quality&durability. If meet any problem, please feel free to contact us. We provide before and after sale service..

UHF Male PL-259 to UHF Male PL259 coaxial cable (1 pcs).
Cable length:About 5 feet(150cm) | Cable type: Flexiable Coaxial Quality Low Loss RG58 | Impedance: 50 Ohm.
Connector: UHF Female | Connector material: Brass (Not Alloy) Body Plating:Nickel | Contact Pin: Brass, Gold plating | Contact point: tin plating | 003e1000 Times Mating Life Time..
Used for Antennas, Antenna Analyzer,dummy load, Radio Scanner, Ham Radio Transceiver,SWR METER,CB Radio Handheld & Amateur Radio Equipment..
Never worry about any security problems. We are confident in the quality of our cable and willing to provide 1 MONTHS Replacement Warranty and 100% Satisfaction Guarantee. If you unfortunately get a defective one, please contact our customer support..