Reviews Secondary Aluminium Adc12

Cooler Master Hyper 212 Black Edition CPU Cooling System - Quiet, Sleek and Precise, 4 Continuous Direct Contact Heat Pipes with Fins, Silencio FP120 Fan

SLEEK & SILENT - With its brushed anodized aluminium finished in gunmetal black the Hyper 212 Black Edition conceals subtle enhanced performance while discreetly lowering the noise.
DIRECT COOLING WITH GROOVED FINS - The primary heat exchanger features 4 embedded copper heat pipes (Ø6mm) in flat array and includes additional aluminium fins with lateral grooves upon the plate to further augment thermal conductivity.
NICKEL-PLATED BLACK HEAT SINK - Offer superior heat radiation compared to regular aluminium fins Stacked fin array ensures minimal air resistance.
SILENCIO FP120 FAN - Ultra-quiet Silent Driver IC technology reduces noise (6 5 - 26 dBA) and delivers robust air pressure (2 9 mmH₂O) Can be easily configured into a dual push-pull system with a secondary fan (not included). Fan rated current: 0.08A.
AMD & INTEL COMPATIBLE - Includes versatile all-in-one mounting brackets that support Intel (LGA2066 LGA2011-v3 LGA2011 LGA1151 LGA1150 LGA1155 LGA1156 LGA1366) and AMD (AM4 AM3+ AM3 AM2+ AM2 FM2+ FM2 FM1) sockets.

Collector-Emitter Sustaining Voltage @ 100 mA VCEO(sus) = 100 Vdc (Min) TIP122, TIP127.
Low Collector-Emitter Saturation Voltage VCE(sat) = 2.0 Vdc (Max) @ IC= 3.0 Adc = 4.0 Vdc (Max) @ IC= 5.0 Adc.
High DC Current Gain - hFE = 2500 (typ) @ IC = 4.0 Adc.
Monolithic construction with built-in base-emitter shunt resistors.

High DC Current Gain − hFE = 2500 (Typ) @ IC = 4.0 Adc.
Collector−Emitter Sustaining Voltage − @ 30 mAdc VCEO(sus) = 100 Vdc (Min) − TIP102, TIP107.
Monolithic Construction with Built−in Base−Emitter Shunt Resistors.
Low Collector−Emitter Saturation Voltage − VCE(sat) = 2.0 Vdc (Max) @ IC = 3.0 Adc = 2.5 Vdc (Max) @ IC = 8.0 Adc.
We have undergone rigorous testing and stable performance.

Artemis General Features: 1M Flash / 384k RAM, 48MHz / 96MHz turbo available, 6uA/MHz (operates less than 5mW at full operation), 48 GPIO - all interrupt capable, 31 PWM channels, Built in BLE radio and antenna.
Additional Artemis Features: 10 ADC channels with 14-bit precision with up to 2.67, million samples per second effective continuous, multi-slot sampling rate.
Additional Artemis Features: 2 channel differential ADC, 2 UARTs, 6 I2C buses, 6 SPI buses, 2/4/8-bit SPI bus, PDM interface, I2S Interface, Secure 'Smart Card' interface, FCC/IC/CE Certified (ID Number 2ASW8-ART3MIS).
Specific Peripherals made available on MicroMod Artemis: 1x USB dedicated for programming and debug, 1x UART with flow control, 2x I2C, 1x SPI, 1x Quad-SPI, 8x Fast GPIO, 2x Digital Pins, 2x Analog Pins, 2x PWM, 1x Differential ADC pair, Status LED, VIN Level ADC.
Additional peripherals are available but are shared on dedicated MicroMod pins. Processor board only, additional carrier board(s) will be needed to use..

ATmega32U4 microcontroller: The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface..
The acceptable voltage range is 5 to 9 V..
On-Board micro-USB connector for programming.
This tiny little board does all of the neat-o tricks that you're familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V, this board will remind you a lot of your other favorite pro-compatible boards but this little guy can go just about anywhere. If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC..
This latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled. We've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED circuit..

SV197 cheshire collimating eyepiece fits for Newtonian and SCT reflector telescopes.
also useful for aligning refractor optics very accurately.
The SV197 cheshire collimating eyepiece for accurate alignment of any Newtonian reflector telescope mirrors.
ideal for ensuring the optical alignment.
The SV197 cheshire collimating eyepiece can directly see the result of the calibration.
Precision machined from aluminium with fine crosshairs and a clear bright mirror with sighting hole.

RGB SYNC - The Hyper 212 RGB Black combines integrated RGB lighting effects with enhanced heat-sink upgrades making it the perfect choice for an air cooler with outstanding aesthetics and performance.
DIRECT COOLING WITH GROOVED FINS - The primary heat exchanger features 4 embedded copper heat pipes (Ø6mm) in flat array and includes additional aluminium fins with lateral grooves upon the plate to further augment thermal conductivity.
NICKEL-PLATED BLACK HEAT SINK - Offer superior heat radiation compared to regular aluminium fins Stacked fin array ensures minimal air resistance.
SF120R RGB FAN - Synchronises with existing motherboard architecture or can be manually assigned via controller (included) Can be easily configured into a dual push-pull system with a secondary fan (not included).
AMD & INTEL COMPATIBLE - Includes versatile all-in-one mounting brackets that support Intel (LGA2066 LGA2011-v3 LGA2011 LGA1151 LGA1150 LGA1156 LGA1155 LGA1366) and AMD (AM4 AM3 AM3 AM2 AM2 FM2 FM2 FM1) sockets.

HF short-wave Q-branch direct sampling,8-bit ADC provides ~50 dB dynamic range..
50 ohm input impedance,independent antenna input for shortwave and VHF.Powered by universal USB..
Wide range of frequency band,the turn receiver covers VHF and UHF bands of 24-1766MHz..
Support receiving mode AM, NFM, FM, DSB, USB, LSB and CW..
Use the RTL2832U + R820T2 chipset with stable working performance..